[Sun Oct  9 12:02:17 2011] Detection parameters:
  Position = (386.3, 208.3) = 22 20 23.33 -24 48 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.4 +/- 9.3
  Background counts = 9.4
  Rate = 0.003 +/- 0.0006

[Sun Oct  9 12:02:17 2011] Off-axis axis estimate = 9.13'
[Sun Oct  9 12:47:46 2011] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 12:47:46 2011] Initial guess for spatial extent in simple fitting = 10.99"
[Sun Oct  9 12:47:46 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.982
[Sun Oct  9 12:47:46 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 10.99"
[Sun Oct  9 13:12:43 2011] fullrun_mos1_xmm0049340201_pi300-10000_cl_pass0_src13.ximg exists
[Sun Oct  9 13:12:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049340201_pi300-10000_cl_pass0_src13.csv
[Sun Oct  9 13:12:43 2011] fullrun_mos1_xmm0049340201_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Oct  9 13:12:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049340201_pi300-10000_cl_pass0_src13.csv
[Sun Oct  9 13:12:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049340201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049340201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 13:12:43 2011] fullrun_mos1_xmm0049340201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Oct  9 13:12:43 2011] fullrun_mos1_xmm0049340201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Oct  9 13:12:43 2011] Fit fullrun_mos1_xmm0049340201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Oct  9 13:47:48 2011] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 10.763627 pixels away
[Sun Oct  9 13:47:48 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 13:47:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 13:47:48 2011] Assessing source extent using major
[Sun Oct  9 13:47:48 2011] Source does appear to be extended
[Sun Oct  9 13:47:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 14:21:37 2011] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 14:21:37 2011] Initial guess for spatial extent in simple fitting = 10.99"
[Sun Oct  9 14:21:37 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.982
[Sun Oct  9 14:21:37 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 10.99"
[Sun Oct  9 14:49:15 2011] fullrun_mos1_xmm0049340201_pi300-10000_cl_pass1_src13.ximg exists
[Sun Oct  9 14:49:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049340201_pi300-10000_cl_pass1_src13.csv
[Sun Oct  9 14:49:15 2011] fullrun_mos1_xmm0049340201_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Oct  9 14:49:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049340201_pi300-10000_cl_pass1_src13.csv
[Sun Oct  9 14:49:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049340201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049340201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 14:49:15 2011] fullrun_mos1_xmm0049340201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Oct  9 14:49:15 2011] fullrun_mos1_xmm0049340201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Oct  9 14:49:15 2011] Fit fullrun_mos1_xmm0049340201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Oct  9 15:27:58 2011] Spatial fit model total counts = 135.000000, observed total counts = 135.000000
[Sun Oct  9 15:27:58 2011] Offset between fit and detection position for source 26 = 0.156351 pixels
[Sun Oct  9 15:27:58 2011] 135.342600 total counts/ 103.884000 bgd. counts: snr = 3.086491
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.156351 pixels
  Position = (386.5, 208.3) = 22 20 23.28 -24 48 18.1
  Extent = 6.6 (4.8-8.8)", rotation angle = 0
  Source counts = 31.5 +/- 11.6
  Background counts = 103.9
  Rate = 0.001 +/- 0.0004
[Sun Oct  9 15:27:58 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 15:27:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 15:27:58 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 15:27:58 2011] Source does appear to be extended
[Sun Oct  9 15:27:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 16:00:28 2011] XMMSAS src. selection expression = ellipse(33574.914000, 18075.900000, 398.606411, 398.606411, 0.000000, X, Y)
[Sun Oct  9 16:00:28 2011] Writing source region out to fullrun_mos1_xmm0049340201_pi300-10000_pass1_cl_src26_src.reg
[Sun Oct  9 16:00:28 2011] Extracting stamp from image fullrun_mos1_xmm0049340201_pi300-10000_cl_sm2.00.img.gz, (364, 185) - (409, 231)
[Sun Oct  9 16:00:28 2011] XMMSAS bgd. selection expression = annulus(33574.914000, 18075.900000, 664.344019, 1328.688038, X, Y)
[Sun Oct  9 16:00:28 2011] Writing fullrun_mos1_xmm0049340201_pi300-10000_pass1_cl_src26.gif
[Sun Oct  9 16:02:27 2011] Mean detx,y = (-5820.05, 8664.38) 
[Sun Oct  9 16:02:28 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Oct  9 16:02:37 2011] Binned source spectrum to 10 counts/bin
[Sun Oct  9 16:02:37 2011] Setting source spectrum file to fullrun_mos1_xmm0049340201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Oct  9 16:02:37 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0049340201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Oct  9 16:09:01 2011] Not generating rmf since there are only 31 counts
[Sun Oct  9 16:09:01 2011] rmf not generated due to insufficient counts
[Sun Oct  9 16:25:50 2011] Updating aperture counts using extracted products
[Sun Oct  9 16:25:50 2011] Error reading totcts from fullrun_mos1_xmm0049340201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Oct  9 16:25:50 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  9 16:25:50 2011] Using photon index=1.80, rate=0.00116, arf fullrun_mos1_xmm0049340201_pi300-10000_pass1_cl_src26.arf
[Sun Oct  9 16:25:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Oct  9 16:25:50 2011] Updating source flux to 2.2e-14
[Sun Oct  9 16:25:52 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting