[Tue Jun 12 23:38:50 2012] Detection parameters:
  Position = (268.7, 459.0) = 2 15 46.55 -73 50 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.8 +/- 17.7
  Background counts = 100.6
  Rate = 0.004 +/- 0.0008

[Tue Jun 12 23:38:50 2012] Off-axis axis estimate = 11.84'
[Tue Jun 12 23:41:39 2012] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 23:41:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 23:41:39 2012] Initial guess for spatial extent in simple fitting = 12.35"
[Tue Jun 12 23:41:39 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.942
[Tue Jun 12 23:41:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.35"
[Tue Jun 12 23:48:42 2012] fullrun_pn_xmm0049150201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 23:48:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0049150201_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 23:48:42 2012] fullrun_pn_xmm0049150201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 23:48:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0049150201_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 23:48:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0049150201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0049150201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 23:48:42 2012] fullrun_pn_xmm0049150201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 23:48:42 2012] fullrun_pn_xmm0049150201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 23:48:42 2012] Fit fullrun_pn_xmm0049150201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 13 00:02:43 2012] Spatial fit model total counts = 846.469000, observed total counts = 840.000000
[Wed Jun 13 00:02:43 2012] Offset between fit and detection position for source 1 = 0.206377 pixels
[Wed Jun 13 00:02:43 2012] 842.487000 total counts/ 810.023000 bgd. counts: snr = 1.140652
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.206377 pixels
  Position = (268.7, 459.2) = 2 15 46.56 -73 50 46.4
  Extent = 4.2 (3.1-5.9)", rotation angle = 0
  Source counts = 32.5 +/- 29.0
  Background counts = 810.0
  Rate = 0.007 +/- 0.006
  Deleting source due to low Poisson probability