[Thu Jul 19 07:45:18 2012] Detection parameters:
  Position = (308.8, 277.7) = 2 7 41.28 2 42 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1116.7 +/- 44.4
  Background counts = 131.5
  Rate = 0.03 +/- 0.001

[Thu Jul 19 07:45:18 2012] Off-axis axis estimate = 1.68'
[Thu Jul 19 09:06:20 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 09:06:20 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Jul 19 09:06:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Thu Jul 19 09:06:20 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.27"
[Thu Jul 19 09:33:39 2012] fullrun_mos2_xmm0048740101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jul 19 09:33:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0048740101_pi300-10000_cl_pass0_src2.csv
[Thu Jul 19 09:33:39 2012] fullrun_mos2_xmm0048740101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jul 19 09:33:39 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0048740101_pi300-10000_cl_pass0_src2.csv
[Thu Jul 19 09:33:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0048740101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0048740101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 09:33:39 2012] fullrun_mos2_xmm0048740101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jul 19 09:33:39 2012] fullrun_mos2_xmm0048740101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jul 19 09:33:39 2012] Fit fullrun_mos2_xmm0048740101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jul 19 09:33:48 2012] Spatial fit model total counts = 889.487000, observed total counts = 890.000000
[Thu Jul 19 09:33:48 2012] Offset between fit and detection position for source 9 = 0.156243 pixels
[Thu Jul 19 09:33:48 2012] 894.775000 total counts/ 481.686000 bgd. counts: snr = 18.821820
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.156243 pixels
  Position = (308.9, 277.5) = 2 7 41.26 2 42 27.1
  Extent = 4.6 (4.2-5.1)", rotation angle = 0
  Source counts = 413.1 +/- 29.9
  Background counts = 481.7
  Rate = 0.01 +/- 0.001
[Thu Jul 19 09:33:48 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 09:33:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 09:33:48 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 09:33:48 2012] Source does appear to be extended
[Thu Jul 19 09:33:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 11:07:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 11:07:17 2012] Initial guess for spatial extent in simple fitting = 4.61"
[Thu Jul 19 11:07:17 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.924
[Thu Jul 19 11:07:17 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.61"
[Thu Jul 19 11:34:01 2012] fullrun_mos2_xmm0048740101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jul 19 11:34:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0048740101_pi300-10000_cl_pass1_src2.csv
[Thu Jul 19 11:34:01 2012] fullrun_mos2_xmm0048740101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jul 19 11:34:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0048740101_pi300-10000_cl_pass1_src2.csv
[Thu Jul 19 11:34:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0048740101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0048740101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 11:34:01 2012] fullrun_mos2_xmm0048740101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jul 19 11:34:01 2012] fullrun_mos2_xmm0048740101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jul 19 11:34:01 2012] Fit fullrun_mos2_xmm0048740101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jul 19 11:34:15 2012] Spatial fit model total counts = 883.000000, observed total counts = 883.000000
[Thu Jul 19 11:34:15 2012] Offset between fit and detection position for source 9 = 0.010881 pixels
[Thu Jul 19 11:34:15 2012] 886.515000 total counts/ 469.272000 bgd. counts: snr = 19.260907
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.010881 pixels
  Position = (308.9, 277.5) = 2 7 41.26 2 42 27.1
  Extent = 4.7 (4.2-5.1)", rotation angle = 0
  Source counts = 417.2 +/- 29.8
  Background counts = 469.3
  Rate = 0.01 +/- 0.001
[Thu Jul 19 11:34:15 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 11:34:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 11:34:15 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 11:34:15 2012] Source does appear to be extended
[Thu Jul 19 11:34:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 13:46:39 2012] XMMSAS src. selection expression = ellipse(26826.589000, 24094.775400, 279.951008, 279.951008, 0.000000, X, Y)
[Thu Jul 19 13:46:39 2012] Writing source region out to fullrun_mos2_xmm0048740101_pi300-10000_pass1_cl_src9_src.reg
[Thu Jul 19 13:46:39 2012] Extracting stamp from image fullrun_mos2_xmm0048740101_pi300-10000_cl_sm2.00.img.gz, (293, 261) - (325, 294)
[Thu Jul 19 13:46:39 2012] XMMSAS bgd. selection expression = annulus(26826.589000, 24094.775400, 466.585013, 933.170027, X, Y)
[Thu Jul 19 13:46:39 2012] Writing fullrun_mos2_xmm0048740101_pi300-10000_pass1_cl_src9.gif
[Thu Jul 19 13:52:03 2012] Mean detx,y = (2681.46, -235.54) 
[Thu Jul 19 13:52:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 13:52:11 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 13:52:11 2012] Setting source spectrum file to fullrun_mos2_xmm0048740101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jul 19 13:52:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0048740101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jul 19 14:08:47 2012] Updating aperture counts using extracted products
[Thu Jul 19 14:08:47 2012] Error reading totcts from fullrun_mos2_xmm0048740101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jul 19 14:08:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 14:08:47 2012] Using photon index=1.80, rate=0.0146, arf fullrun_mos2_xmm0048740101_pi300-10000_pass1_cl_src9.arf
[Thu Jul 19 14:08:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 14:08:47 2012] Updating source flux to 1.8e-13