[Sun Aug 12 10:43:38 2012] Detection parameters:
  Position = (343.2, 303.1) = 0 19 42.30 21 56 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 302.7 +/- 29.3
  Background counts = 188.1
  Rate = 0.008 +/- 0.0008

[Sun Aug 12 10:43:38 2012] Off-axis axis estimate = 3.26'
[Sun Aug 12 10:59:22 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 10:59:22 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Sun Aug 12 10:59:22 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.903
[Sun Aug 12 10:59:22 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.06"
[Sun Aug 12 11:05:51 2012] fullrun_pn_xmm0047940101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Aug 12 11:05:51 2012] fullrun_pn_xmm0047940101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Aug 12 11:05:51 2012] Fit fullrun_pn_xmm0047940101_pi300-10000_cl_pass0_src2 appears to have run properly
[Sun Aug 12 11:05:51 2012] fullrun_pn_xmm0047940101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Aug 12 11:05:51 2012] fullrun_pn_xmm0047940101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Aug 12 11:05:51 2012] Fit fullrun_pn_xmm0047940101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Aug 12 11:41:11 2012] Spatial fit model total counts = 2552.560000, observed total counts = 2406.000000
[Sun Aug 12 11:41:11 2012] Offset between fit and detection position for source 2 = 1.512819 pixels
[Sun Aug 12 11:41:11 2012] 2550.847000 total counts/ 2100.310000 bgd. counts: snr = 9.830798
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.512819 pixels
  Position = (344.7, 302.8) = 0 19 41.84 21 56 13.1
  Extent = 15.3 (13.6-16.1)" x 9.6 (4.2-13.6)", rotation angle = 188 (262-0) degrees
  Source counts = 450.5 +/- 50.5
  Background counts = 2100.3
  Rate = 0.008 +/- 0.0009
[Sun Aug 12 11:41:11 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 11:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 11:41:11 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 11:41:11 2012] Source does appear to be extended
[Sun Aug 12 11:41:11 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Sun Aug 12 11:41:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 11:41:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 11:41:22 2012] Initial guess for spatial extent in simple fitting = 12.42"
[Sun Aug 12 11:41:22 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.088
[Sun Aug 12 11:41:22 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.42"
[Sun Aug 12 11:51:25 2012] fullrun_pn_xmm0047940101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Aug 12 11:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0047940101_pi300-10000_cl_pass1_src2.csv
[Sun Aug 12 11:51:25 2012] fullrun_pn_xmm0047940101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Aug 12 11:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0047940101_pi300-10000_cl_pass1_src2.csv
[Sun Aug 12 11:51:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0047940101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0047940101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 11:51:25 2012] fullrun_pn_xmm0047940101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Aug 12 11:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0047940101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Aug 12 11:51:25 2012] fullrun_pn_xmm0047940101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Aug 12 11:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0047940101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Aug 12 11:51:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0047940101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0047940101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 12:23:25 2012] Warning, spatial fit 2 centroid is now closest to src. 9
[Sun Aug 12 12:23:25 2012] Source 2 in spatial fitting is no longer close to this source
[Sun Aug 12 12:23:25 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 12:23:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 12:23:25 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 12:23:25 2012] Source does appear to be extended
[Sun Aug 12 12:23:25 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Sun Aug 12 12:23:36 2012] XMMSAS src. selection expression = ellipse(29943.100800, 26299.192600, 916.884026, 573.927617, 187.677488, X, Y)
[Sun Aug 12 12:23:36 2012] Writing source region out to fullrun_pn_xmm0047940101_pi300-10000_pass1_cl_src2_src.reg
[Sun Aug 12 12:23:36 2012] Extracting stamp from image fullrun_pn_xmm0047940101_pi300-10000_cl_sm2.00.img.gz, (292, 250) - (397, 356)
[Sun Aug 12 12:23:36 2012] XMMSAS bgd. selection expression = annulus(29943.100800, 26299.192600, 1528.140044, 3056.280088, X, Y) && !ellipse(27725.112800, 27078.878100, 453.367213, 424.392812, 206.996072, X, Y)
[Sun Aug 12 12:23:36 2012] Writing fullrun_pn_xmm0047940101_pi300-10000_pass1_cl_src2.gif
[Sun Aug 12 12:43:18 2012] Mean detx,y = (2435.07, -351.31) 
[Sun Aug 12 12:43:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 12:44:44 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 12:44:44 2012] Setting source spectrum file to fullrun_pn_xmm0047940101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug 12 12:44:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0047940101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Aug 12 13:20:41 2012] Updating aperture counts using extracted products
[Sun Aug 12 13:20:41 2012] Error reading totcts from fullrun_pn_xmm0047940101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug 12 13:20:42 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 13:20:42 2012] Using photon index=1.80, rate=0.00796, arf fullrun_pn_xmm0047940101_pi300-10000_pass1_cl_src2.arf
[Sun Aug 12 13:20:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 13:20:42 2012] Updating source flux to 2.1e-14
[Thu Aug 16 20:58:55 2012] Reading fit data from xmm0047940101/analysis//spectral/fullrun_pn_xmm0047940101_pi300-10000_pass1_cl_src2_pl.csv
[Thu Aug 16 20:58:55 2012] Spectral fit parameter nH value = 6.7228e+21
[Thu Aug 16 20:58:55 2012] Spectral fit parameter PhoIndex value = 2.37053
[Thu Aug 16 20:58:55 2012] Failed to get F(0.3-8.0) from xmm0047940101/analysis//spectral/fullrun_pn_xmm0047940101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Aug 16 20:58:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 20:58:55 2012] Using Nh = 6.7e+21, photon index=2.37, rate=0.00796, arf fullrun_pn_xmm0047940101_pi300-10000_pass1_cl_src2.arf
[Thu Aug 16 20:58:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 20:58:56 2012] Updating source flux to 3.4e-14