[Sun Aug 12 10:44:17 2012] Detection parameters:
  Position = (455.6, 235.4) = 0 19 7.19 21 51 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.9 +/- 20.9
  Background counts = 43.4
  Rate = 0.004 +/- 0.0004

[Sun Aug 12 10:44:18 2012] Off-axis axis estimate = 12.28'
[Sun Aug 12 11:05:51 2012] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 11:05:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 11:05:51 2012] Initial guess for spatial extent in simple fitting = 12.57"
[Sun Aug 12 11:05:51 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.066
[Sun Aug 12 11:05:51 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.57"
[Sun Aug 12 11:41:08 2012] fullrun_mos2_xmm0047940101_pi300-10000_cl_pass0_src4.ximg exists
[Sun Aug 12 11:41:08 2012] fullrun_mos2_xmm0047940101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Aug 12 11:41:08 2012] Fit fullrun_mos2_xmm0047940101_pi300-10000_cl_pass0_src4 appears to have run properly
[Sun Aug 12 11:41:08 2012] fullrun_mos2_xmm0047940101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Aug 12 11:41:08 2012] fullrun_mos2_xmm0047940101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Aug 12 11:41:08 2012] Fit fullrun_mos2_xmm0047940101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Aug 12 11:41:16 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.452594 pixels away
[Sun Aug 12 11:41:16 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 11:41:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 11:41:16 2012] Assessing source extent using major
[Sun Aug 12 11:41:16 2012] Source does appear to be extended
[Sun Aug 12 11:41:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 11:51:25 2012] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 11:51:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 11:51:25 2012] Initial guess for spatial extent in simple fitting = 12.57"
[Sun Aug 12 11:51:25 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.066
[Sun Aug 12 11:51:25 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.57"
[Sun Aug 12 12:23:22 2012] fullrun_mos2_xmm0047940101_pi300-10000_cl_pass1_src4.ximg exists
[Sun Aug 12 12:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0047940101_pi300-10000_cl_pass1_src4.csv
[Sun Aug 12 12:23:22 2012] fullrun_mos2_xmm0047940101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Aug 12 12:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0047940101_pi300-10000_cl_pass1_src4.csv
[Sun Aug 12 12:23:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0047940101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0047940101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 12:23:22 2012] fullrun_mos2_xmm0047940101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Aug 12 12:23:22 2012] fullrun_mos2_xmm0047940101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Aug 12 12:23:22 2012] Fit fullrun_mos2_xmm0047940101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Aug 12 12:23:30 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.452594 pixels away
[Sun Aug 12 12:23:30 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 12:23:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 12:23:30 2012] Assessing source extent using major
[Sun Aug 12 12:23:30 2012] Source does appear to be extended
[Sun Aug 12 12:23:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 13:04:26 2012] XMMSAS src. selection expression = ellipse(39591.581238, 20428.871445, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 13:04:26 2012] Writing source region out to fullrun_mos2_xmm0047940101_pi300-10000_pass1_cl_src3_src.reg
[Sun Aug 12 13:04:26 2012] Extracting stamp from image fullrun_mos2_xmm0047940101_pi300-10000_cl_sm2.00.img.gz, (418, 198) - (493, 273)
[Sun Aug 12 13:04:26 2012] XMMSAS bgd. selection expression = annulus(39591.581238, 20428.871445, 1087.500000, 2175.000000, X, Y)
[Sun Aug 12 13:04:26 2012] Writing fullrun_mos2_xmm0047940101_pi300-10000_pass1_cl_src3.gif
[Sun Aug 12 13:06:37 2012] Mean detx,y = (-13549.81, -1452.98) 
[Sun Aug 12 13:06:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 13:06:56 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 13:06:57 2012] Setting source spectrum file to fullrun_mos2_xmm0047940101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Aug 12 13:06:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0047940101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Aug 12 13:17:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 12 13:17:22 2012] rmf not generated due to insufficient counts
[Sun Aug 12 13:20:42 2012] Updating aperture counts using extracted products
[Sun Aug 12 13:20:42 2012] Error reading totcts from fullrun_mos2_xmm0047940101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Aug 12 13:20:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 13:20:43 2012] Using photon index=1.80, rate=0.0042, arf fullrun_mos2_xmm0047940101_pi300-10000_pass1_cl_src3.arf
[Sun Aug 12 13:20:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 13:20:43 2012] Updating source flux to 8.5e-14
[Sun Aug 12 13:20:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting