[Fri Oct  7 10:07:07 2011] Detection parameters:
  Position = (442.6, 442.7) = 11 45 6.67 47 37 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.3 +/- 12.0
  Background counts = 14.5
  Rate = 0.003 +/- 0.0004

[Fri Oct  7 10:07:07 2011] Off-axis axis estimate = 14.79'
[Fri Oct  7 10:50:21 2011] Using EEF radius (= 13.82 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 10:50:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 10:50:21 2011] Initial guess for spatial extent in simple fitting = 13.82"
[Fri Oct  7 10:50:21 2011] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.906
[Fri Oct  7 10:50:21 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 13.82"
[Fri Oct  7 11:22:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_src15.ximg exists
[Fri Oct  7 11:22:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_src15.csv
[Fri Oct  7 11:22:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Oct  7 11:22:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_src15.csv
[Fri Oct  7 11:22:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 11:22:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Oct  7 11:22:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Oct  7 11:22:21 2011] Fit fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Oct  7 11:54:21 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 17.339576 pixels away
[Fri Oct  7 11:54:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 11:54:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 11:54:21 2011] Assessing source extent using major
[Fri Oct  7 11:54:21 2011] Source does appear to be extended
[Fri Oct  7 11:54:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 12:30:03 2011] Using EEF radius (= 13.82 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 12:30:03 2011] Initial guess for spatial extent in simple fitting = 13.82"
[Fri Oct  7 12:30:03 2011] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.906
[Fri Oct  7 12:30:03 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 13.82"
[Fri Oct  7 12:54:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_src14.ximg exists
[Fri Oct  7 12:54:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Oct  7 12:54:21 2011] Fit fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_src14 appears to have run properly
[Fri Oct  7 12:54:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Oct  7 12:54:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Oct  7 12:54:21 2011] Fit fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Oct  7 13:22:37 2011] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 17.339576 pixels away
[Fri Oct  7 13:22:37 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:22:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:22:37 2011] Assessing source extent using major
[Fri Oct  7 13:22:37 2011] Source does appear to be extended
[Fri Oct  7 13:22:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:56:18 2011] XMMSAS src. selection expression = ellipse(38461.866272, 38469.772949, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Oct  7 13:56:18 2011] Writing source region out to fullrun_mos1_xmm0047540601_pi300-10000_pass1_cl_src4_src.reg
[Fri Oct  7 13:56:18 2011] Extracting stamp from image fullrun_mos1_xmm0047540601_pi300-10000_cl_sm2.00.img.gz, (405, 405) - (480, 480)
[Fri Oct  7 13:56:18 2011] XMMSAS bgd. selection expression = annulus(38461.866272, 38469.772949, 1087.500000, 2175.000000, X, Y) && !ellipse(35655.826874, 39509.455872, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Oct  7 13:56:18 2011] Writing fullrun_mos1_xmm0047540601_pi300-10000_pass1_cl_src4.gif
[Fri Oct  7 13:59:00 2011] Mean detx,y = (6256.31, 14593.79) 
[Fri Oct  7 13:59:01 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct  7 13:59:13 2011] Binned source spectrum to 10 counts/bin
[Fri Oct  7 13:59:13 2011] Setting source spectrum file to fullrun_mos1_xmm0047540601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Oct  7 13:59:13 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0047540601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Oct  7 14:23:45 2011] Not generating rmf since there are only 70 counts
[Fri Oct  7 14:23:45 2011] rmf not generated due to insufficient counts
[Fri Oct  7 14:55:07 2011] Updating aperture counts using extracted products
[Fri Oct  7 14:55:07 2011] Error reading totcts from fullrun_mos1_xmm0047540601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Oct  7 14:55:07 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 14:55:07 2011] Using photon index=1.80, rate=0.00258, arf fullrun_mos1_xmm0047540601_pi300-10000_pass1_cl_src4.arf
[Fri Oct  7 14:55:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct  7 14:55:07 2011] Updating source flux to 5.9e-14
[Fri Oct  7 14:55:08 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting