[Fri Oct  7 10:07:07 2011] Detection parameters:
  Position = (214.9, 282.0) = 11 46 44.55 47 26 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.7 +/- 11.9
  Background counts = 19.3
  Rate = 0.004 +/- 0.0007

[Fri Oct  7 10:07:07 2011] Off-axis axis estimate = 6.17'
[Fri Oct  7 10:50:21 2011] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 10:50:21 2011] Initial guess for spatial extent in simple fitting = 9.52"
[Fri Oct  7 10:50:21 2011] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.246
[Fri Oct  7 10:50:21 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 9.52"
[Fri Oct  7 11:22:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_src11.ximg exists
[Fri Oct  7 11:22:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_src11.csv
[Fri Oct  7 11:22:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Oct  7 11:22:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_src11.csv
[Fri Oct  7 11:22:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 11:22:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Oct  7 11:22:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Oct  7 11:22:21 2011] Fit fullrun_mos1_xmm0047540601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Oct  7 11:54:21 2011] Spatial fit model total counts = 336.532000, observed total counts = 335.000000
[Fri Oct  7 11:54:21 2011] Offset between fit and detection position for source 21 = 0.183960 pixels
[Fri Oct  7 11:54:21 2011] 335.278800 total counts/ 253.704000 bgd. counts: snr = 5.121443
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.183960 pixels
  Position = (215.0, 282.1) = 11 46 44.49 47 26 4.8
  Extent = 10.9 (7.6-15.2)", rotation angle = 0
  Source counts = 81.6 +/- 18.3
  Background counts = 253.7
  Rate = 0.003 +/- 0.0007
[Fri Oct  7 11:54:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 11:54:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 11:54:21 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 11:54:21 2011] Source does appear to be extended
[Fri Oct  7 11:54:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 11:54:21 2011] Source is confused with source 22
[Fri Oct  7 12:30:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 12:30:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 12:30:03 2011] Initial guess for spatial extent in simple fitting = 10.92"
[Fri Oct  7 12:30:03 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.993
[Fri Oct  7 12:30:03 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 10.92"
[Fri Oct  7 12:54:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_src10.ximg exists
[Fri Oct  7 12:54:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_src10.csv
[Fri Oct  7 12:54:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Oct  7 12:54:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_src10.csv
[Fri Oct  7 12:54:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 12:54:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct  7 12:54:21 2011] fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct  7 12:54:21 2011] Fit fullrun_mos1_xmm0047540601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct  7 13:22:37 2011] Warning, spatial fit 10 centroid is now closest to src. 2
[Fri Oct  7 13:22:37 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 13:22:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 13:22:37 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 13:22:37 2011] Source does appear to be extended
[Fri Oct  7 13:22:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 13:56:18 2011] XMMSAS src. selection expression = ellipse(18659.490220, 24495.783600, 655.296019, 655.296019, 0.000000, X, Y)
[Fri Oct  7 13:56:18 2011] Writing source region out to fullrun_mos1_xmm0047540601_pi300-10000_pass1_cl_src21_src.reg
[Fri Oct  7 13:56:18 2011] Extracting stamp from image fullrun_mos1_xmm0047540601_pi300-10000_cl_sm2.00.img.gz, (177, 244) - (253, 320)
[Fri Oct  7 13:56:18 2011] XMMSAS bgd. selection expression = annulus(18659.490220, 24495.783600, 1092.160031, 2184.320063, X, Y) && !ellipse(16176.347600, 26683.869200, 382.919211, 382.919211, 0.000000, X, Y) && !ellipse(20766.931200, 26833.611800, 424.290412, 424.290412, 0.000000, X, Y) && !ellipse(18827.911200, 24206.857200, 1506.912043, 412.051212, 55.331000, X, Y)
[Fri Oct  7 13:56:18 2011] Writing fullrun_mos1_xmm0047540601_pi300-10000_pass1_cl_src21.gif
[Fri Oct  7 13:58:03 2011] Mean detx,y = (-379.16, -8644.67) 
[Fri Oct  7 13:58:04 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Oct  7 13:58:21 2011] Binned source spectrum to 10 counts/bin
[Fri Oct  7 13:58:21 2011] Setting source spectrum file to fullrun_mos1_xmm0047540601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Oct  7 13:58:21 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0047540601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri Oct  7 14:17:00 2011] Not generating rmf since there are only 81 counts
[Fri Oct  7 14:17:00 2011] rmf not generated due to insufficient counts
[Fri Oct  7 14:55:07 2011] Updating aperture counts using extracted products
[Fri Oct  7 14:55:07 2011] Error reading totcts from fullrun_mos1_xmm0047540601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Oct  7 14:55:07 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 14:55:07 2011] Using photon index=1.80, rate=0.00301, arf fullrun_mos1_xmm0047540601_pi300-10000_pass1_cl_src21.arf
[Fri Oct  7 14:55:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Oct  7 14:55:07 2011] Updating source flux to 5.1e-14
[Fri Oct  7 14:55:08 2011] Flag c found in src. 21 procflags, skipping spectral fitting
[Fri Oct  7 14:55:08 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting