[Sun Jun 17 01:56:23 2012] Detection parameters:
  Position = (331.6, 217.1) = 9 43 32.43 16 40 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.9 +/- 8.0
  Background counts = 4.8
  Rate = 0.003 +/- 0.0007

[Sun Jun 17 01:56:23 2012] Off-axis axis estimate = 6.37'
[Sun Jun 17 02:45:19 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 02:45:19 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Sun Jun 17 02:45:19 2012] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.919
[Sun Jun 17 02:45:19 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 9.61"
[Sun Jun 17 03:26:32 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun 17 03:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src9.csv
[Sun Jun 17 03:26:32 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun 17 03:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src9.csv
[Sun Jun 17 03:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 03:26:32 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun 17 03:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 17 03:26:32 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun 17 03:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 17 03:26:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 04:06:48 2012] Spatial fit model total counts = 184.960000, observed total counts = 157.000000
[Sun Jun 17 04:06:48 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 17 04:06:48 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 04:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 04:06:48 2012] Assessing source extent using major
[Sun Jun 17 04:06:48 2012] Source does appear to be extended
[Sun Jun 17 04:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 04:06:48 2012] Source is confused with source 19
[Sun Jun 17 04:41:04 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 04:41:04 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Sun Jun 17 04:41:04 2012] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.919
[Sun Jun 17 04:41:04 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 9.61"
[Sun Jun 17 05:09:00 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jun 17 05:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src9.csv
[Sun Jun 17 05:09:00 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jun 17 05:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src9.csv
[Sun Jun 17 05:09:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 05:09:00 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jun 17 05:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Jun 17 05:09:00 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jun 17 05:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Jun 17 05:09:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 05:39:52 2012] Spatial fit model total counts = 181.578000, observed total counts = 157.000000
[Sun Jun 17 05:39:52 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 17 05:39:52 2012] Spatial fit model total counts = 141.789000, observed total counts = 129.000000
[Sun Jun 17 05:39:52 2012] Offset between fit and detection position for source 20 = 2.664979 pixels
[Sun Jun 17 05:39:52 2012] Warning, changing simple spatial fit ID from 9 to 20
[Sun Jun 17 05:39:52 2012] 135.286700 total counts/ 35.483700 bgd. counts: snr = 16.754410
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.664979 pixels
  Position = (334.2, 217.6) = 9 43 31.64 16 40 10.7
  Extent = 19.1 (19.0-38.2)", rotation angle = 0
  Source counts = 99.8 +/- 11.6
  Background counts = 35.5
  Rate = 0.007 +/- 0.0008
[Sun Jun 17 05:39:52 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 05:39:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 05:39:52 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 05:39:52 2012] Source does appear to be extended
[Sun Jun 17 05:39:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 06:15:02 2012] XMMSAS src. selection expression = ellipse(29028.039600, 18882.256000, 1145.370033, 1145.370033, 0.000000, X, Y)
[Sun Jun 17 06:15:02 2012] Writing source region out to fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src20_src.reg
[Sun Jun 17 06:15:02 2012] Extracting stamp from image fullrun_mos1_xmm0046940401_pi300-10000_cl_sm2.00.img.gz, (268, 152) - (400, 283)
[Sun Jun 17 06:15:02 2012] XMMSAS bgd. selection expression = annulus(29028.039600, 18882.256000, 1908.950055, 3817.900110, X, Y) && !ellipse(27718.630066, 18743.567703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.404144, 18234.967636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29934.176400, 17625.830260, 823.568024, 823.568024, 0.000000, X, Y) && !ellipse(29177.852753, 19185.697784, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 17 06:15:02 2012] Writing fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src20.gif
[Sun Jun 17 06:16:29 2012] Mean detx,y = (6343.54, -1595.78) 
[Sun Jun 17 06:16:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 06:17:06 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 06:17:06 2012] Setting source spectrum file to fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Jun 17 06:17:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Jun 17 06:19:55 2012] Not generating rmf since there are only 99 counts
[Sun Jun 17 06:19:55 2012] rmf not generated due to insufficient counts
[Sun Jun 17 06:29:01 2012] Updating aperture counts using extracted products
[Sun Jun 17 06:29:01 2012] Error reading totcts from fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Jun 17 06:29:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 06:29:02 2012] Using photon index=1.80, rate=0.00667, arf fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src20.arf
[Sun Jun 17 06:29:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 06:29:02 2012] Updating source flux to 9e-14
[Sun Jun 17 06:29:04 2012] Flag p found in src. 20 procflags, skipping spectral fitting
[Sun Jun 17 06:29:04 2012] Flag c found in src. 20 procflags, skipping spectral fitting
[Sun Jun 17 06:29:04 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 17 06:29:05 2012] xmm0046940401/analysis//spectral/fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete