[Sun Jun 17 01:56:23 2012] Detection parameters:
  Position = (335.9, 221.1) = 9 43 31.12 16 40 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.4 +/- 6.7
  Background counts = 4.8
  Rate = 0.002 +/- 0.0006

[Sun Jun 17 01:56:23 2012] Off-axis axis estimate = 6.23'
[Sun Jun 17 02:45:19 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 02:45:19 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Sun Jun 17 02:45:19 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.240
[Sun Jun 17 02:45:19 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 9.54"
[Sun Jun 17 03:26:32 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src22.ximg exists
[Sun Jun 17 03:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src22.csv
[Sun Jun 17 03:26:32 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Jun 17 03:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src22.csv
[Sun Jun 17 03:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 03:26:33 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Jun 17 03:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Jun 17 03:26:33 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Jun 17 03:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Jun 17 03:26:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 04:06:48 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 12.257304 pixels away
[Sun Jun 17 04:06:48 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 04:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 04:06:48 2012] Assessing source extent using major
[Sun Jun 17 04:06:48 2012] Source does appear to be extended
[Sun Jun 17 04:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 04:06:48 2012] Source is confused with source 20
[Sun Jun 17 04:41:04 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 04:41:04 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Sun Jun 17 04:41:04 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.240
[Sun Jun 17 04:41:04 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 9.54"
[Sun Jun 17 05:09:00 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src20.ximg exists
[Sun Jun 17 05:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src20.csv
[Sun Jun 17 05:09:00 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Jun 17 05:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src20.csv
[Sun Jun 17 05:09:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 05:09:00 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Jun 17 05:09:00 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Jun 17 05:09:00 2012] Fit fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Jun 17 05:39:52 2012] Warning, spatial fit 20 centroid is now closest to src. 20
[Sun Jun 17 05:39:52 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 05:39:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 05:39:52 2012] Assessing source extent using major
[Sun Jun 17 05:39:52 2012] Source does appear to be extended
[Sun Jun 17 05:39:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 06:15:02 2012] XMMSAS src. selection expression = ellipse(29177.852753, 19185.697784, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 17 06:15:02 2012] Writing source region out to fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src19_src.reg
[Sun Jun 17 06:15:02 2012] Extracting stamp from image fullrun_mos1_xmm0046940401_pi300-10000_cl_sm2.00.img.gz, (298, 184) - (373, 259)
[Sun Jun 17 06:15:02 2012] XMMSAS bgd. selection expression = annulus(29177.852753, 19185.697784, 1087.500000, 2175.000000, X, Y) && !ellipse(29028.039600, 18882.256000, 1527.160044, 1527.160044, 0.000000, X, Y) && !ellipse(27718.630066, 18743.567703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.404144, 18234.967636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29934.176400, 17625.830260, 823.568024, 823.568024, 0.000000, X, Y)
[Sun Jun 17 06:15:02 2012] Writing fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src19.gif
[Sun Jun 17 06:18:48 2012] Mean detx,y = (6077.37, -1825.53) 
[Sun Jun 17 06:18:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 06:18:59 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 06:18:59 2012] Setting source spectrum file to fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jun 17 06:18:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Jun 17 06:20:43 2012] Not generating rmf since there are only 22 counts
[Sun Jun 17 06:20:43 2012] rmf not generated due to insufficient counts
[Sun Jun 17 06:29:02 2012] Updating aperture counts using extracted products
[Sun Jun 17 06:29:02 2012] Error reading totcts from fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jun 17 06:29:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 06:29:02 2012] Using photon index=1.80, rate=0.00196, arf fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src19.arf
[Sun Jun 17 06:29:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 06:29:02 2012] Updating source flux to 2.7e-14
[Sun Jun 17 06:29:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 17 06:29:05 2012] xmm0046940401/analysis//spectral/fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete