[Sun Jun 17 01:56:23 2012] Detection parameters:
  Position = (226.9, 365.9) = 9 44 4.14 16 50 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.6 +/- 6.7
  Background counts = 3.6
  Rate = 0.003 +/- 0.0007

[Sun Jun 17 01:56:23 2012] Off-axis axis estimate = 7.13'
[Sun Jun 17 02:45:19 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 02:45:19 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Sun Jun 17 02:45:19 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.150
[Sun Jun 17 02:45:19 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.99"
[Sun Jun 17 03:26:32 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src16.ximg exists
[Sun Jun 17 03:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src16.csv
[Sun Jun 17 03:26:32 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Jun 17 03:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src16.csv
[Sun Jun 17 03:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 03:26:33 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Jun 17 03:26:33 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Jun 17 03:26:33 2012] Fit fullrun_mos1_xmm0046940401_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Jun 17 04:06:48 2012] Spatial fit model total counts = 44.707700, observed total counts = 43.000000
[Sun Jun 17 04:06:48 2012] Offset between fit and detection position for source 10 = 0.236699 pixels
[Sun Jun 17 04:06:48 2012] 44.471300 total counts/ 23.505800 bgd. counts: snr = 4.324319
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.236699 pixels
  Position = (227.2, 365.8) = 9 44 4.07 16 50 55.5
  Extent = 6.1 (4.3-8.9)", rotation angle = 0
  Source counts = 21.0 +/- 6.7
  Background counts = 23.5
  Rate = 0.001 +/- 0.0004
[Sun Jun 17 04:06:48 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 04:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 04:06:48 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 04:06:48 2012] Source does appear to be extended
[Sun Jun 17 04:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 04:41:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 17 04:41:04 2012] Initial guess for spatial extent in simple fitting = 6.14"
[Sun Jun 17 04:41:04 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.094
[Sun Jun 17 04:41:04 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 6.14"
[Sun Jun 17 05:09:00 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jun 17 05:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src15.csv
[Sun Jun 17 05:09:00 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jun 17 05:09:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src15.csv
[Sun Jun 17 05:09:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 05:09:00 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jun 17 05:09:00 2012] fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jun 17 05:09:00 2012] Fit fullrun_mos1_xmm0046940401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Jun 17 05:39:52 2012] Warning, spatial fit 15 centroid is now closest to src. 27
[Sun Jun 17 05:39:52 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 05:39:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 05:39:52 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 05:39:52 2012] Source does appear to be extended
[Sun Jun 17 05:39:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 06:15:02 2012] XMMSAS src. selection expression = ellipse(19713.842900, 31778.887600, 368.614211, 368.614211, 0.000000, X, Y)
[Sun Jun 17 06:15:02 2012] Writing source region out to fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun 17 06:15:02 2012] Extracting stamp from image fullrun_mos1_xmm0046940401_pi300-10000_cl_sm2.00.img.gz, (206, 345) - (248, 387)
[Sun Jun 17 06:15:02 2012] XMMSAS bgd. selection expression = annulus(19713.842900, 31778.887600, 614.357018, 1228.714035, X, Y) && !ellipse(19931.844800, 30868.168000, 545.067216, 373.407211, 348.954767, X, Y)
[Sun Jun 17 06:15:02 2012] Writing fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src10.gif
[Sun Jun 17 06:18:04 2012] Mean detx,y = (-9128.12, 2227.92) 
[Sun Jun 17 06:18:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 06:18:11 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 06:18:11 2012] Setting source spectrum file to fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 17 06:18:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun 17 06:20:28 2012] Not generating rmf since there are only 20 counts
[Sun Jun 17 06:20:28 2012] rmf not generated due to insufficient counts
[Sun Jun 17 06:29:02 2012] Updating aperture counts using extracted products
[Sun Jun 17 06:29:02 2012] Error reading totcts from fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 17 06:29:02 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 06:29:02 2012] Using photon index=1.80, rate=0.0014, arf fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src10.arf
[Sun Jun 17 06:29:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 06:29:02 2012] Updating source flux to 2.7e-14
[Sun Jun 17 06:29:04 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 17 06:29:05 2012] xmm0046940401/analysis//spectral/fullrun_mos1_xmm0046940401_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete