[Sun Jun 16 00:52:03 2013] Detection parameters:
  Position = (280.6, 297.5) = 10 38 9.03 41 45 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 283.9 +/- 26.3
  Background counts = 547.9
  Rate = 0.02 +/- 0.002

[Sun Jun 16 00:52:10 2013] Off-axis axis estimate = 1.30'
[Sun Jun 16 01:00:34 2013] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:00:34 2013] Initial guess for spatial extent in simple fitting = 7.08"
[Sun Jun 16 01:00:34 2013] source mask rpix=1.6, npix_max = 18, mask sum = 18, frac = 0.995
[Sun Jun 16 01:00:34 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.08"
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src5.csv
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src5.csv
[Sun Jun 16 06:32:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 16 06:32:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:58:58 2013] Source 6 is offset by 1.292551 and -1.205130 pixels which is larger than
2 X fitted extent = 0.813356 x 6.506851, not incorporating fit results
[Sun Jun 16 06:58:58 2013] Spatial fit model total counts = 4725.740000, observed total counts = 4102.000000
[Sun Jun 16 06:58:58 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 06:58:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:58:58 2013] Assessing source extent using major
[Sun Jun 16 06:58:58 2013] Source does appear to be extended
[Sun Jun 16 06:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:58:58 2013] Source is confused with source 41
[Sun Jun 16 06:59:18 2013] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:59:18 2013] Initial guess for spatial extent in simple fitting = 7.08"
[Sun Jun 16 06:59:18 2013] source mask rpix=1.6, npix_max = 18, mask sum = 18, frac = 0.995
[Sun Jun 16 06:59:18 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.08"
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src5.csv
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src5.csv
[Sun Jun 16 12:25:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun 16 12:25:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:41:42 2013] Source 6 is offset by 1.320676 and -1.309493 pixels which is larger than
2 X fitted extent = 0.813356 x 6.506851, not incorporating fit results
[Sun Jun 16 12:41:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 12:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 12:41:43 2013] Assessing source extent using major
[Sun Jun 16 12:41:43 2013] Source does appear to be extended
[Sun Jun 16 12:41:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 12:42:02 2013] XMMSAS src. selection expression = ellipse(24363.326172, 25833.928314, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 12:42:02 2013] Writing source region out to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src6_src.reg
[Sun Jun 16 12:42:02 2013] Extracting stamp from image fullrun_pn_xmm0046940101_pi300-10000_cl_sm2.00.img.gz, (243, 260) - (318, 335)
[Sun Jun 16 12:42:02 2013] XMMSAS bgd. selection expression = annulus(24363.326172, 25833.928314, 1087.500000, 2175.000000, X, Y) && !ellipse(23736.529510, 26307.126221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22380.470642, 25981.242615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21583.830429, 25629.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23882.221588, 25722.464874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22484.829224, 25241.240814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25094.215912, 23540.776855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25747.560211, 23033.881317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23125.251495, 26819.018524, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 12:42:02 2013] Writing fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src6.gif
[Sun Jun 16 12:52:36 2013] Mean detx,y = (-2557.31, 741.42) 
[Sun Jun 16 12:52:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 12:53:11 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 12:53:11 2013] Setting source spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 16 12:53:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jun 16 13:43:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 13:43:33 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:41:46 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:41:46 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 2336.00
[Sun Jun 16 14:41:46 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 11541.00
[Sun Jun 16 14:41:47 2013] Got source and background scale factors 1007710.000000, 6012066.000000
[Sun Jun 16 14:41:47 2013] User source parameters:
  Position = (280.6, 297.5) = 10 38 9.03 41 45 23.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 401.6 +/- 49.3
  Background aperture counts = 1934.4
  Rate = 0.05 +/- 0.006

[Sun Jun 16 14:41:47 2013] Updating counts from extracted products
[Sun Jun 16 14:41:47 2013] Set source signif. to 401.56/43.98 = 9.13
[Sun Jun 16 14:41:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:41:58 2013] Using photon index=1.80, rate=0.0477, arf fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src6.arf
[Sun Jun 16 14:41:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:41:58 2013] Updating source flux to 2.5e-13
[Sun Jun 16 14:42:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:42:13 2013] xmm0046940101/analysis//spectral/fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete