[Sun Jun 16 00:52:10 2013] Detection parameters:
  Position = (266.4, 308.8) = 10 38 14.57 41 46 9.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 308.6 +/- 32.8
  Background counts = 510.6
  Rate = 0.03 +/- 0.003

[Sun Jun 16 00:52:10 2013] Off-axis axis estimate = 2.44'
[Sun Jun 16 01:00:34 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:00:34 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Sun Jun 16 01:00:34 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.931
[Sun Jun 16 01:00:34 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 7.65"
[Sun Jun 16 06:32:41 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src53.ximg exists
[Sun Jun 16 06:32:41 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src53.csv
[Sun Jun 16 06:32:41 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src53_1.ximg exists
[Sun Jun 16 06:32:41 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src53.csv
[Sun Jun 16 06:32:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:32:43 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sun Jun 16 06:32:43 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sun Jun 16 06:32:43 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sun Jun 16 06:32:43 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sun Jun 16 06:32:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:58:58 2013] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 10.580311 pixels away
[Sun Jun 16 06:58:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:58:58 2013] Assessing source extent using major
[Sun Jun 16 06:58:58 2013] Source does appear to be extended
[Sun Jun 16 06:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:59:18 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:59:18 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Sun Jun 16 06:59:18 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.931
[Sun Jun 16 06:59:18 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 7.65"
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src49.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src49.csv
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src49_1.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src49.csv
[Sun Jun 16 12:25:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:25:48 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sun Jun 16 12:25:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Sun Jun 16 12:25:48 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sun Jun 16 12:25:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Sun Jun 16 12:25:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:41:43 2013] Spatial fit model total counts = 4732.260000, observed total counts = 4102.000000
[Sun Jun 16 12:41:43 2013] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 12:41:43 2013] Spatial fit model total counts = 5134.600000, observed total counts = 2861.000000
[Sun Jun 16 12:41:43 2013] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 12:41:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 12:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 12:41:43 2013] Assessing source extent using major
[Sun Jun 16 12:41:43 2013] Source does appear to be extended
[Sun Jun 16 12:41:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 12:42:05 2013] XMMSAS src. selection expression = ellipse(23125.251495, 26819.018524, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 12:42:05 2013] Writing source region out to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src55_src.reg
[Sun Jun 16 12:42:05 2013] Extracting stamp from image fullrun_pn_xmm0046940101_pi300-10000_cl_sm2.00.img.gz, (229, 271) - (304, 346)
[Sun Jun 16 12:42:05 2013] XMMSAS bgd. selection expression = annulus(23125.251495, 26819.018524, 1087.500000, 2175.000000, X, Y) && !ellipse(24363.326172, 25833.928314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20791.508621, 25593.650818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23736.529510, 26307.126221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22380.470642, 25981.242615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21583.830429, 25629.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23882.221588, 25722.464874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22484.829224, 25241.240814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20604.083466, 24852.934814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20265.596436, 24210.192047, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 12:42:05 2013] Writing fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src55.gif
[Sun Jun 16 13:35:19 2013] Mean detx,y = (-3029.59, -594.56) 
[Sun Jun 16 13:35:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 13:36:03 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 13:36:03 2013] Setting source spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sun Jun 16 13:36:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sun Jun 16 14:17:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 14:17:15 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:41:58 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:41:58 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 2431.00
[Sun Jun 16 14:41:58 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src55_bgd.pi.gz = 6825.00
[Sun Jun 16 14:41:58 2013] Got source and background scale factors 1037786.000000, 5007071.000000
[Sun Jun 16 14:41:58 2013] User source parameters:
  Position = (266.4, 308.8) = 10 38 14.57 41 46 9.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1016.4 +/- 50.3
  Background aperture counts = 1414.6
  Rate = 0.1 +/- 0.006

[Sun Jun 16 14:41:58 2013] Updating counts from extracted products
[Sun Jun 16 14:41:58 2013] Set source signif. to 1016.42/37.61 = 27.02
[Sun Jun 16 14:41:59 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:41:59 2013] Using photon index=1.80, rate=0.121, arf fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src55.arf
[Sun Jun 16 14:41:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:41:59 2013] Updating source flux to 4.5e-13
[Sun Jun 16 14:42:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:42:13 2013] xmm0046940101/analysis//spectral/fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete