[Sun Jun 16 00:52:03 2013] Detection parameters:
  Position = (209.7, 277.2) = 10 38 36.58 41 44 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1288.4 +/- 207.1
  Background counts = 517.7
  Rate = 0.07 +/- 0.01

[Sun Jun 16 00:52:10 2013] Off-axis axis estimate = 6.62'
[Sun Jun 16 01:00:34 2013] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:00:34 2013] Initial guess for spatial extent in simple fitting = 9.74"
[Sun Jun 16 01:00:34 2013] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.734
[Sun Jun 16 01:00:34 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.74"
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src4.csv
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src4.csv
[Sun Jun 16 06:32:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun 16 06:32:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:58:58 2013] Warning, spatial fit 4 centroid is now closest to src. 47
[Sun Jun 16 06:58:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:58:58 2013] Assessing source extent using major
[Sun Jun 16 06:58:58 2013] Source does appear to be extended
[Sun Jun 16 06:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:59:18 2013] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:59:18 2013] Initial guess for spatial extent in simple fitting = 9.74"
[Sun Jun 16 06:59:18 2013] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.734
[Sun Jun 16 06:59:18 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.74"
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src4.csv
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src4.csv
[Sun Jun 16 12:25:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun 16 12:25:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:41:42 2013] Spatial fit model total counts = 3604.930000, observed total counts = 2915.000000
[Sun Jun 16 12:41:42 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 12:41:43 2013] Source 5 is offset by -0.626212 and 7.537199 pixels which is larger than
2 X fitted extent = 1.105287 x 1.105287, not incorporating fit results
[Sun Jun 16 12:41:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 12:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 12:41:43 2013] Assessing source extent using major
[Sun Jun 16 12:41:43 2013] Source does appear to be extended
[Sun Jun 16 12:41:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 12:41:43 2013] Source is confused with source 49
[Sun Jun 16 12:42:02 2013] Counts = 1288.431274, rescaling region sizes by 2.000000
[Sun Jun 16 12:42:02 2013] XMMSAS src. selection expression = ellipse(18195.297516, 24068.684296, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 16 12:42:02 2013] Writing source region out to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 16 12:42:02 2013] Extracting stamp from image fullrun_pn_xmm0046940101_pi300-10000_cl_sm2.00.img.gz, (135, 202) - (285, 352)
[Sun Jun 16 12:42:02 2013] XMMSAS bgd. selection expression = annulus(18195.297516, 24068.684296, 4350.000000, 8700.000000, X, Y) && !ellipse(16352.432388, 23013.657959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14101.896200, 21411.476000, 1895.960055, 1895.960055, 0.000000, X, Y) && !ellipse(14924.033264, 20756.705170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27747.997345, 20462.627487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24363.326172, 25833.928314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17091.048000, 22844.360000, 1564.664045, 1564.664045, 0.000000, X, Y) && !ellipse(15840.364853, 22617.904602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16087.670212, 22162.132980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16771.171661, 21879.125443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14698.000000, 21818.126144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16435.692000, 21013.588000, 1695.544049, 1695.544049, 0.000000, X, Y) && !ellipse(13764.630000, 21342.038000, 1932.816056, 589.460817, 321.879000, X, Y) && !ellipse(13306.002655, 20918.075195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13937.181442, 20835.393600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12238.440598, 20364.694077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13221.590000, 20111.330000, 1033.456030, 1033.456030, 0.000000, X, Y) && !ellipse(11253.064972, 19702.796600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10599.281265, 19266.581924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11039.248825, 18879.198547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10415.640190, 18757.318100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10800.038651, 18069.977478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11578.699005, 17157.308502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20791.508621, 25593.650818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23736.529510, 26307.126221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22380.470642, 25981.242615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21583.830429, 25629.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23882.221588, 25722.464874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22484.829224, 25241.240814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20604.083466, 24852.934814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20265.596436, 24210.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18999.987778, 23859.951202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25094.215912, 23540.776855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18088.026000, 23603.582000, 1618.552047, 1618.552047, 0.000000, X, Y) && !ellipse(25747.560211, 23033.881317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17073.291428, 21234.992767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18376.654000, 19870.840000, 1633.984047, 1633.984047, 0.000000, X, Y) && !ellipse(27103.658905, 20104.294113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23125.251495, 26819.018524, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 12:42:02 2013] Writing fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src5.gif
[Sun Jun 16 12:49:44 2013] Mean detx,y = (-8756.96, -590.16) 
[Sun Jun 16 12:49:54 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 12:52:16 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 12:52:17 2013] Setting source spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 16 12:52:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 16 13:43:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 13:43:11 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:41:46 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:41:46 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 8011.00
[Sun Jun 16 14:41:46 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 211198.00
[Sun Jun 16 14:41:46 2013] Got source and background scale factors 4343711.000000, 136271207.000000
[Sun Jun 16 14:41:46 2013] User source parameters:
  Position = (209.7, 277.2) = 10 38 36.58 41 44 11.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1279.0 +/- 90.5
  Background aperture counts = 6732.0
  Rate = 0.2 +/- 0.01

[Sun Jun 16 14:41:46 2013] Updating counts from extracted products
[Sun Jun 16 14:41:46 2013] Set source signif. to 1278.96/82.05 = 15.59
[Sun Jun 16 14:41:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:41:58 2013] Using photon index=1.80, rate=0.152, arf fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src5.arf
[Sun Jun 16 14:41:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:41:58 2013] Updating source flux to 7.2e-13
[Sun Jun 16 14:42:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:42:13 2013] xmm0046940101/analysis//spectral/fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete