[Sun Jun 16 00:52:08 2013] Detection parameters:
  Position = (275.1, 296.2) = 10 38 11.18 41 45 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.5 +/- 33.9
  Background counts = 552.7
  Rate = 0.02 +/- 0.003

[Sun Jun 16 00:52:10 2013] Off-axis axis estimate = 1.70'
[Sun Jun 16 01:00:34 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:00:34 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jun 16 01:00:34 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sun Jun 16 01:00:34 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 7.28"
[Sun Jun 16 06:32:41 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src39.ximg exists
[Sun Jun 16 06:32:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src39.csv
[Sun Jun 16 06:32:41 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun Jun 16 06:32:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src39.csv
[Sun Jun 16 06:32:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:32:43 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun Jun 16 06:32:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sun Jun 16 06:32:43 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Jun 16 06:32:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sun Jun 16 06:32:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:58:58 2013] Source 41 is offset by 6.759627 and 1.928746 pixels which is larger than
2 X fitted extent = 6.693885 x 6.693885, not incorporating fit results
[Sun Jun 16 06:58:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:58:58 2013] Assessing source extent using major
[Sun Jun 16 06:58:58 2013] Source does appear to be extended
[Sun Jun 16 06:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:58:58 2013] Source is confused with source 6
[Sun Jun 16 06:59:18 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:59:18 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jun 16 06:59:18 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sun Jun 16 06:59:18 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 7.28"
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src37.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src37.csv
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src37_1.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src37.csv
[Sun Jun 16 12:25:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:25:48 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sun Jun 16 12:25:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Sun Jun 16 12:25:48 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sun Jun 16 12:25:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Sun Jun 16 12:25:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:41:43 2013] Source 41 is offset by 6.759627 and -0.150066 pixels which is larger than
2 X fitted extent = 2.083292 x 2.083292, not incorporating fit results
[Sun Jun 16 12:41:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 12:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 12:41:43 2013] Assessing source extent using major
[Sun Jun 16 12:41:43 2013] Source does appear to be extended
[Sun Jun 16 12:41:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 12:42:04 2013] XMMSAS src. selection expression = ellipse(23882.221588, 25722.464874, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 12:42:04 2013] Writing source region out to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src41_src.reg
[Sun Jun 16 12:42:04 2013] Extracting stamp from image fullrun_pn_xmm0046940101_pi300-10000_cl_sm2.00.img.gz, (238, 259) - (313, 334)
[Sun Jun 16 12:42:04 2013] XMMSAS bgd. selection expression = annulus(23882.221588, 25722.464874, 1087.500000, 2175.000000, X, Y) && !ellipse(24363.326172, 25833.928314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23736.529510, 26307.126221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22380.470642, 25981.242615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21583.830429, 25629.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22484.829224, 25241.240814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25094.215912, 23540.776855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25747.560211, 23033.881317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23125.251495, 26819.018524, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 12:42:04 2013] Writing fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src41.gif
[Sun Jun 16 13:16:43 2013] Mean detx,y = (-2930.67, 603.92) 
[Sun Jun 16 13:16:48 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 13:17:08 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 13:17:08 2013] Setting source spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sun Jun 16 13:17:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Sun Jun 16 14:08:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 14:08:10 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:41:55 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:41:55 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src41_src_b10.pi.gz = 3219.00
[Sun Jun 16 14:41:55 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src41_bgd.pi.gz = 10137.00
[Sun Jun 16 14:41:55 2013] Got source and background scale factors 1306728.000000, 5148694.000000
[Sun Jun 16 14:41:55 2013] User source parameters:
  Position = (275.1, 296.2) = 10 38 11.18 41 45 14.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 646.3 +/- 57.7
  Background aperture counts = 2572.7
  Rate = 0.08 +/- 0.007

[Sun Jun 16 14:41:55 2013] Updating counts from extracted products
[Sun Jun 16 14:41:55 2013] Set source signif. to 646.25/50.72 = 12.74
[Sun Jun 16 14:41:59 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:41:59 2013] Using photon index=1.80, rate=0.0768, arf fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src41.arf
[Sun Jun 16 14:41:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:41:59 2013] Updating source flux to 2.6e-13
[Sun Jun 16 14:42:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:42:13 2013] xmm0046940101/analysis//spectral/fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete