[Sun Jun 16 00:52:08 2013] Detection parameters:
  Position = (257.8, 299.2) = 10 38 17.90 41 45 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.3 +/- 26.2
  Background counts = 534.6
  Rate = 0.009 +/- 0.002

[Sun Jun 16 00:52:10 2013] Off-axis axis estimate = 2.95'
[Sun Jun 16 01:00:34 2013] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:00:34 2013] Initial guess for spatial extent in simple fitting = 7.90"
[Sun Jun 16 01:00:34 2013] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.025
[Sun Jun 16 01:00:34 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 7.90"
[Sun Jun 16 06:32:41 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src37.ximg exists
[Sun Jun 16 06:32:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src37.csv
[Sun Jun 16 06:32:41 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sun Jun 16 06:32:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src37.csv
[Sun Jun 16 06:32:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:32:43 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sun Jun 16 06:32:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sun Jun 16 06:32:43 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Jun 16 06:32:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sun Jun 16 06:32:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:58:58 2013] Source 39 is offset by 0.478715 and -2.308096 pixels which is larger than
2 X fitted extent = 1.282667 x 1.282667, not incorporating fit results
[Sun Jun 16 06:58:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:58:58 2013] Assessing source extent using major
[Sun Jun 16 06:58:58 2013] Source does appear to be extended
[Sun Jun 16 06:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:59:18 2013] Using EEF radius (= 7.90 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:59:18 2013] Initial guess for spatial extent in simple fitting = 7.90"
[Sun Jun 16 06:59:18 2013] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.025
[Sun Jun 16 06:59:18 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 7.90"
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src35.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src35.csv
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src35.csv
[Sun Jun 16 12:25:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:25:48 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun Jun 16 12:25:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Jun 16 12:25:48 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun Jun 16 12:25:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Jun 16 12:25:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:41:43 2013] Source 39 is offset by -5.803533 and -0.394103 pixels which is larger than
2 X fitted extent = 0.908248 x 0.908248, not incorporating fit results
[Sun Jun 16 12:41:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 12:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 12:41:43 2013] Assessing source extent using major
[Sun Jun 16 12:41:43 2013] Source does appear to be extended
[Sun Jun 16 12:41:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 12:42:04 2013] XMMSAS src. selection expression = ellipse(22380.470642, 25981.242615, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 12:42:04 2013] Writing source region out to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src39_src.reg
[Sun Jun 16 12:42:04 2013] Extracting stamp from image fullrun_pn_xmm0046940101_pi300-10000_cl_sm2.00.img.gz, (220, 262) - (295, 337)
[Sun Jun 16 12:42:04 2013] XMMSAS bgd. selection expression = annulus(22380.470642, 25981.242615, 1087.500000, 2175.000000, X, Y) && !ellipse(24363.326172, 25833.928314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20791.508621, 25593.650818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23736.529510, 26307.126221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21583.830429, 25629.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23882.221588, 25722.464874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22484.829224, 25241.240814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20604.083466, 24852.934814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20265.596436, 24210.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25094.215912, 23540.776855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23125.251495, 26819.018524, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 12:42:04 2013] Writing fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src39.gif
[Sun Jun 16 13:15:14 2013] Mean detx,y = (-4157.05, -353.48) 
[Sun Jun 16 13:15:17 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 13:15:38 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 13:15:39 2013] Setting source spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Jun 16 13:15:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Jun 16 14:07:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 14:07:41 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:41:54 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:41:54 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 2460.00
[Sun Jun 16 14:41:54 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src39_bgd.pi.gz = 6927.00
[Sun Jun 16 14:41:54 2013] Got source and background scale factors 1038058.000000, 4198396.000000
[Sun Jun 16 14:41:54 2013] User source parameters:
  Position = (257.8, 299.2) = 10 38 17.90 41 45 34.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 747.3 +/- 50.6
  Background aperture counts = 1712.7
  Rate = 0.09 +/- 0.006

[Sun Jun 16 14:41:54 2013] Updating counts from extracted products
[Sun Jun 16 14:41:54 2013] Set source signif. to 747.29/41.38 = 18.06
[Sun Jun 16 14:41:59 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:41:59 2013] Using photon index=1.80, rate=0.0889, arf fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src39.arf
[Sun Jun 16 14:41:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:41:59 2013] Updating source flux to 3.5e-13
[Sun Jun 16 14:42:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:42:13 2013] xmm0046940101/analysis//spectral/fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete