[Sun Jun 16 00:52:07 2013] Detection parameters:
  Position = (133.6, 197.8) = 10 39 6.04 41 38 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 247.9 +/- 39.4
  Background counts = 455.8
  Rate = 0.01 +/- 0.002

[Sun Jun 16 00:52:10 2013] Off-axis axis estimate = 14.00'
[Sun Jun 16 01:00:34 2013] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:00:34 2013] Initial guess for spatial extent in simple fitting = 13.43"
[Sun Jun 16 01:00:34 2013] source mask rpix=3.1, npix_max = 51, mask sum = 48, frac = 0.933
[Sun Jun 16 01:00:34 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 13.43"
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src31.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src31.csv
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src31.csv
[Sun Jun 16 06:32:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun Jun 16 06:32:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:58:58 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 10.052427 pixels away
[Sun Jun 16 06:58:58 2013] Source 33 is offset by 2.153655 and -2.708295 pixels which is larger than
2 X fitted extent = 1.543526 x 1.543526, not incorporating fit results
[Sun Jun 16 06:58:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:58:58 2013] Assessing source extent using major
[Sun Jun 16 06:58:58 2013] Source does appear to be extended
[Sun Jun 16 06:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:59:18 2013] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:59:18 2013] Initial guess for spatial extent in simple fitting = 13.43"
[Sun Jun 16 06:59:18 2013] source mask rpix=3.1, npix_max = 51, mask sum = 48, frac = 0.933
[Sun Jun 16 06:59:18 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 13.43"
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src29.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src29.csv
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src29.csv
[Sun Jun 16 12:25:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:25:48 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Jun 16 12:25:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sun Jun 16 12:25:48 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Jun 16 12:25:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sun Jun 16 12:25:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:41:42 2013] Source 33 is offset by 2.148763 and -2.706918 pixels which is larger than
2 X fitted extent = 1.543526 x 1.543526, not incorporating fit results
[Sun Jun 16 12:41:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 12:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 12:41:43 2013] Assessing source extent using major
[Sun Jun 16 12:41:43 2013] Source does appear to be extended
[Sun Jun 16 12:41:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 12:42:03 2013] XMMSAS src. selection expression = ellipse(11578.699005, 17157.308502, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 12:42:03 2013] Writing source region out to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src33_src.reg
[Sun Jun 16 12:42:03 2013] Extracting stamp from image fullrun_pn_xmm0046940101_pi300-10000_cl_sm2.00.img.gz, (96, 160) - (171, 235)
[Sun Jun 16 12:42:03 2013] XMMSAS bgd. selection expression = annulus(11578.699005, 17157.308502, 1087.500000, 2175.000000, X, Y) && !ellipse(13221.590000, 20111.330000, 1033.456030, 1033.456030, 0.000000, X, Y) && !ellipse(11253.064972, 19702.796600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10599.281265, 19266.581924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11039.248825, 18879.198547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10415.640190, 18757.318100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10800.038651, 18069.977478, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 12:42:03 2013] Writing fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src33.gif
[Sun Jun 16 13:10:49 2013] Mean detx,y = (-17777.15, 1757.80) 
[Sun Jun 16 13:10:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 13:11:11 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 13:11:11 2013] Setting source spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Jun 16 13:11:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun Jun 16 14:06:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 14:06:08 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:41:53 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:41:53 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 2172.00
[Sun Jun 16 14:41:53 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src33_bgd.pi.gz = 9448.00
[Sun Jun 16 14:41:53 2013] Got source and background scale factors 1219542.000000, 4834314.000000
[Sun Jun 16 14:41:53 2013] User source parameters:
  Position = (133.6, 197.8) = 10 39 6.04 41 38 5.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -211.4 +/- 47.6
  Background aperture counts = 2383.4
  Rate = -0.03 +/- 0.006

[Sun Jun 16 14:41:53 2013] Updating counts from extracted products
[Sun Jun 16 14:41:53 2013] Set source signif. to -211.43/48.82 = -4.33
[Sun Jun 16 14:41:59 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:41:59 2013] Using photon index=1.80, rate=-0.0251, arf fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src33.arf
[Sun Jun 16 14:41:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:41:59 2013] Updated flux is not positive, keeping original flux
[Sun Jun 16 14:42:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:42:13 2013] xmm0046940101/analysis//spectral/fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete