[Sun Jun 16 00:52:06 2013] Detection parameters:
  Position = (322.4, 227.8) = 10 37 52.79 41 40 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 228.3 +/- 28.1
  Background counts = 489.8
  Rate = 0.01 +/- 0.002

[Sun Jun 16 00:52:10 2013] Off-axis axis estimate = 5.41'
[Sun Jun 16 01:00:34 2013] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:00:34 2013] Initial guess for spatial extent in simple fitting = 9.13"
[Sun Jun 16 01:00:34 2013] source mask rpix=2.1, npix_max = 27, mask sum = 14, frac = 0.518
[Sun Jun 16 01:00:34 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.13"
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src25.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src25.csv
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src25.csv
[Sun Jun 16 06:32:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Jun 16 06:32:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:58:58 2013] Warning, spatial fit 25 centroid is now closest to src. 4
[Sun Jun 16 06:58:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:58:58 2013] Assessing source extent using major
[Sun Jun 16 06:58:58 2013] Source does appear to be extended
[Sun Jun 16 06:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:59:18 2013] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:59:18 2013] Initial guess for spatial extent in simple fitting = 9.13"
[Sun Jun 16 06:59:18 2013] source mask rpix=2.1, npix_max = 27, mask sum = 14, frac = 0.518
[Sun Jun 16 06:59:18 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 9.13"
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src23.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src23.csv
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src23.csv
[Sun Jun 16 12:25:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:25:48 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Jun 16 12:25:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sun Jun 16 12:25:48 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Jun 16 12:25:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sun Jun 16 12:25:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:41:42 2013] Spatial fit model total counts = 3790.300000, observed total counts = 2995.000000
[Sun Jun 16 12:41:42 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 12:41:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 12:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 12:41:43 2013] Assessing source extent using major
[Sun Jun 16 12:41:43 2013] Source does appear to be extended
[Sun Jun 16 12:41:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 12:42:03 2013] XMMSAS src. selection expression = ellipse(28001.090668, 19770.348511, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 12:42:03 2013] Writing source region out to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src27_src.reg
[Sun Jun 16 12:42:03 2013] Extracting stamp from image fullrun_pn_xmm0046940101_pi300-10000_cl_sm2.00.img.gz, (285, 190) - (360, 265)
[Sun Jun 16 12:42:03 2013] XMMSAS bgd. selection expression = annulus(28001.090668, 19770.348511, 1087.500000, 2175.000000, X, Y) && !ellipse(27747.997345, 20462.627487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28868.584320, 17908.622055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27103.658905, 20104.294113, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 12:42:03 2013] Writing fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src27.gif
[Sun Jun 16 13:06:26 2013] Mean detx,y = (-2503.86, 7832.27) 
[Sun Jun 16 13:06:31 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 13:06:51 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 13:06:52 2013] Setting source spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun 16 13:06:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Jun 16 14:04:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 14:04:01 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:41:51 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:41:51 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 1930.00
[Sun Jun 16 14:41:51 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 12905.00
[Sun Jun 16 14:41:51 2013] Got source and background scale factors 991734.000000, 7241961.000000
[Sun Jun 16 14:41:51 2013] User source parameters:
  Position = (322.4, 227.8) = 10 37 52.79 41 40 20.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 162.8 +/- 44.9
  Background aperture counts = 1767.2
  Rate = 0.02 +/- 0.005

[Sun Jun 16 14:41:51 2013] Updating counts from extracted products
[Sun Jun 16 14:41:51 2013] Set source signif. to 162.75/42.04 = 3.87
[Sun Jun 16 14:41:59 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:41:59 2013] Using photon index=1.80, rate=0.0194, arf fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src27.arf
[Sun Jun 16 14:41:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:41:59 2013] Getting flux using calc_pl_flux failed
[Sun Jun 16 14:42:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:42:13 2013] xmm0046940101/analysis//spectral/fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete