[Sun Jun 16 00:52:06 2013] Detection parameters:
  Position = (129.9, 227.0) = 10 39 7.53 41 40 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.2 +/- 38.9
  Background counts = 448.8
  Rate = 0.01 +/- 0.002

[Sun Jun 16 00:52:10 2013] Off-axis axis estimate = 13.27'
[Sun Jun 16 01:00:34 2013] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:00:34 2013] Initial guess for spatial extent in simple fitting = 13.06"
[Sun Jun 16 01:00:34 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.998
[Sun Jun 16 01:00:34 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 13.06"
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src24.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src24.csv
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src24.csv
[Sun Jun 16 06:32:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Jun 16 06:32:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:58:58 2013] Warning, spatial fit 24 centroid is now closest to src. 22
[Sun Jun 16 06:58:58 2013] Spatial fit model total counts = 4654.900000, observed total counts = 3773.000000
[Sun Jun 16 06:58:58 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 06:58:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:58:58 2013] Assessing source extent using major
[Sun Jun 16 06:58:58 2013] Source does appear to be extended
[Sun Jun 16 06:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:59:18 2013] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:59:18 2013] Initial guess for spatial extent in simple fitting = 13.06"
[Sun Jun 16 06:59:18 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.998
[Sun Jun 16 06:59:18 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 13.06"
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src22.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src22.csv
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src22.csv
[Sun Jun 16 12:25:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Jun 16 12:25:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Jun 16 12:25:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:41:42 2013] Warning, spatial fit 22 centroid is now closest to src. 22
[Sun Jun 16 12:41:42 2013] Source 26 is offset by -4.888380 and -1.177671 pixels which is larger than
2 X fitted extent = 1.545554 x 1.545554, not incorporating fit results
[Sun Jun 16 12:41:42 2013] Source 26 is offset by -8.935736 and 4.011018 pixels which is larger than
2 X fitted extent = 1.527058 x 1.527058, not incorporating fit results
[Sun Jun 16 12:41:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 12:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 12:41:43 2013] Assessing source extent using major
[Sun Jun 16 12:41:43 2013] Source does appear to be extended
[Sun Jun 16 12:41:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 12:42:03 2013] XMMSAS src. selection expression = ellipse(11253.064972, 19702.796600, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 12:42:03 2013] Writing source region out to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src26_src.reg
[Sun Jun 16 12:42:03 2013] Extracting stamp from image fullrun_pn_xmm0046940101_pi300-10000_cl_sm2.00.img.gz, (92, 190) - (167, 265)
[Sun Jun 16 12:42:03 2013] XMMSAS bgd. selection expression = annulus(11253.064972, 19702.796600, 1087.500000, 2175.000000, X, Y) && !ellipse(14101.896200, 21411.476000, 1895.960055, 1895.960055, 0.000000, X, Y) && !ellipse(13764.630000, 21342.038000, 1932.816056, 589.460817, 321.879000, X, Y) && !ellipse(13306.002655, 20918.075195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13937.181442, 20835.393600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12238.440598, 20364.694077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13221.590000, 20111.330000, 1033.456030, 1033.456030, 0.000000, X, Y) && !ellipse(10599.281265, 19266.581924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11039.248825, 18879.198547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10415.640190, 18757.318100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10800.038651, 18069.977478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11578.699005, 17157.308502, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 12:42:03 2013] Writing fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src26.gif
[Sun Jun 16 13:05:30 2013] Mean detx,y = (-16853.57, -494.13) 
[Sun Jun 16 13:05:35 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 13:06:02 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 13:06:02 2013] Setting source spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jun 16 13:06:02 2013] Setting bgd. spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Jun 16 14:03:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 14:03:45 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:41:51 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:41:51 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 2238.00
[Sun Jun 16 14:41:51 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 6427.00
[Sun Jun 16 14:41:51 2013] Got source and background scale factors 1154484.000000, 4832049.000000
[Sun Jun 16 14:41:51 2013] User source parameters:
  Position = (129.9, 227.0) = 10 39 7.53 41 40 3.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 702.4 +/- 48.3
  Background aperture counts = 1535.6
  Rate = 0.08 +/- 0.006

[Sun Jun 16 14:41:51 2013] Updating counts from extracted products
[Sun Jun 16 14:41:51 2013] Set source signif. to 702.45/39.19 = 17.93
[Sun Jun 16 14:41:59 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:41:59 2013] Using photon index=1.80, rate=0.0835, arf fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src26.arf
[Sun Jun 16 14:41:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:41:59 2013] Updating source flux to 7.6e-13
[Sun Jun 16 14:42:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:42:13 2013] xmm0046940101/analysis//spectral/fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete