[Sun Jun 16 00:52:01 2013] Detection parameters:
  Position = (168.5, 245.9) = 10 38 52.56 41 41 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 338.3 +/- 39.8
  Background counts = 462.8
  Rate = 0.02 +/- 0.002

[Sun Jun 16 00:52:10 2013] Off-axis axis estimate = 10.16'
[Sun Jun 16 01:00:34 2013] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:00:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 01:00:34 2013] Initial guess for spatial extent in simple fitting = 11.51"
[Sun Jun 16 01:00:34 2013] source mask rpix=2.6, npix_max = 39, mask sum = 22, frac = 0.556
[Sun Jun 16 01:00:34 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 11.51"
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src2.csv
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src2.csv
[Sun Jun 16 06:32:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:32:41 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun 16 06:32:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun 16 06:32:41 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun 16 06:32:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:58:58 2013] Warning, spatial fit 2 centroid is now closest to src. 17
[Sun Jun 16 06:58:58 2013] Spatial fit model total counts = 4527.760000, observed total counts = 4426.000000
[Sun Jun 16 06:58:58 2013] Offset between fit and detection position for source 2 = 5.899601 pixels
[Sun Jun 16 06:58:58 2013] Warning, changing simple spatial fit ID from 2 to 19
[Sun Jun 16 06:58:58 2013] 4283.439000 total counts/ 3508.900000 bgd. counts: snr = 13.075485
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 5.899601 pixels
  Position = (162.6, 246.7) = 10 38 54.84 41 41 35.6
  Extent = 23.7 (23.7-23.7)", rotation angle = 0
  Source counts = 774.5 +/- 65.4
  Background counts = 3508.9
  Rate = 0.09 +/- 0.008
[Sun Jun 16 06:58:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:58:58 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 06:58:58 2013] Source does appear to be extended
[Sun Jun 16 06:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:58:58 2013] Source is confused with source 3
[Sun Jun 16 06:58:58 2013] Source is confused with source 14
[Sun Jun 16 06:58:58 2013] Source is confused with source 17
[Sun Jun 16 06:58:58 2013] Source is confused with source 18
[Sun Jun 16 06:58:58 2013] Source is confused with source 19
[Sun Jun 16 06:58:58 2013] Source is confused with source 21
[Sun Jun 16 06:59:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:59:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 06:59:18 2013] Initial guess for spatial extent in simple fitting = 23.70"
[Sun Jun 16 06:59:18 2013] source mask rpix=5.4, npix_max = 141, mask sum = 114, frac = 0.806
[Sun Jun 16 06:59:18 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 23.70"
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src2.csv
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src2.csv
[Sun Jun 16 12:25:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 16 12:25:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:41:42 2013] Warning, spatial fit 2 centroid is now closest to src. 19
[Sun Jun 16 12:41:42 2013] Source 2 is offset by 0.836600 and 2.854759 pixels which is larger than
2 X fitted extent = 1.413954 x 1.413954, not incorporating fit results
[Sun Jun 16 12:41:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 12:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 12:41:43 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 12:41:43 2013] Source does appear to be extended
[Sun Jun 16 12:41:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 12:42:02 2013] XMMSAS src. selection expression = ellipse(14101.896200, 21411.476000, 1421.970041, 1421.970041, 0.000000, X, Y)
[Sun Jun 16 12:42:02 2013] Writing source region out to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun 16 12:42:02 2013] Extracting stamp from image fullrun_pn_xmm0046940101_pi300-10000_cl_sm2.00.img.gz, (81, 165) - (244, 328)
[Sun Jun 16 12:42:02 2013] XMMSAS bgd. selection expression = annulus(14101.896200, 21411.476000, 2369.950068, 4739.900136, X, Y) && !ellipse(16352.432388, 23013.657959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14924.033264, 20756.705170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18195.297516, 24068.684296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17091.048000, 22844.360000, 1564.664045, 1564.664045, 0.000000, X, Y) && !ellipse(15840.364853, 22617.904602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16087.670212, 22162.132980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16771.171661, 21879.125443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14698.000000, 21818.126144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16435.692000, 21013.588000, 1695.544049, 1695.544049, 0.000000, X, Y) && !ellipse(13764.630000, 21342.038000, 1932.816056, 589.460817, 321.879000, X, Y) && !ellipse(13306.002655, 20918.075195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13937.181442, 20835.393600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12238.440598, 20364.694077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13221.590000, 20111.330000, 1033.456030, 1033.456030, 0.000000, X, Y) && !ellipse(11253.064972, 19702.796600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10599.281265, 19266.581924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11039.248825, 18879.198547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10415.640190, 18757.318100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10800.038651, 18069.977478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11578.699005, 17157.308502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18999.987778, 23859.951202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18088.026000, 23603.582000, 1618.552047, 1618.552047, 0.000000, X, Y) && !ellipse(17073.291428, 21234.992767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18376.654000, 19870.840000, 1633.984047, 1633.984047, 0.000000, X, Y)
[Sun Jun 16 12:42:02 2013] Writing fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src2.gif
[Sun Jun 16 12:43:11 2013] Mean detx,y = (-13605.31, -413.15) 
[Sun Jun 16 12:43:17 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 12:44:20 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 12:44:21 2013] Setting source spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 16 12:44:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 16 14:41:45 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:41:45 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 9267.00
[Sun Jun 16 14:41:45 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 45903.00
[Sun Jun 16 14:41:45 2013] Got source and background scale factors 5266317.000000, 32445397.000000
[Sun Jun 16 14:41:45 2013] User source parameters:
  Position = (162.6, 246.7) = 10 38 54.84 41 41 35.6
  Extent = 23.7 (23.7-23.7)", rotation angle = 0
  Source aperture counts = 1816.3 +/- 97.3
  Background aperture counts = 7450.7
  Rate = 0.2 +/- 0.01

[Sun Jun 16 14:41:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:41:58 2013] Using photon index=1.80, rate=0.0921, arf fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src2.arf
[Sun Jun 16 14:41:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:41:58 2013] Updating source flux to 6.2e-13
[Sun Jun 16 14:42:06 2013] Flag b found in src. 2 procflags, skipping spectral fitting
[Sun Jun 16 14:42:06 2013] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun Jun 16 14:42:13 2013] xmm0046940101/analysis//spectral/fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete