[Sun Jun 16 00:52:05 2013] Detection parameters:
  Position = (160.8, 246.9) = 10 38 55.54 41 41 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 230.0 +/- 33.1
  Background counts = 455.4
  Rate = 0.01 +/- 0.002

[Sun Jun 16 00:52:10 2013] Off-axis axis estimate = 10.65'
[Sun Jun 16 01:00:34 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:00:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 01:00:34 2013] Initial guess for spatial extent in simple fitting = 11.75"
[Sun Jun 16 01:00:34 2013] source mask rpix=2.7, npix_max = 41, mask sum = 35, frac = 0.853
[Sun Jun 16 01:00:34 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 11.75"
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src16.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src16.csv
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src16.csv
[Sun Jun 16 06:32:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Jun 16 06:32:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:58:58 2013] Spatial fit model total counts = 3669.430000, observed total counts = 3167.000000
[Sun Jun 16 06:58:58 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 06:58:58 2013] Spatial fit model total counts = 4026.150000, observed total counts = 3737.000000
[Sun Jun 16 06:58:58 2013] Offset between fit and detection position for source 18 = 2.248981 pixels
[Sun Jun 16 06:58:58 2013] Warning, changing simple spatial fit ID from 16 to 17
[Sun Jun 16 06:58:58 2013] 3801.476000 total counts/ 3434.930000 bgd. counts: snr = 6.254168
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 2.248981 pixels
  Position = (158.8, 245.9) = 10 38 56.31 41 41 32.2
  Extent = 24.2 (23.9-48.3)" x 7.7 (5.2-14.0)", rotation angle = 321 (312-331) degrees
  Source counts = 366.5 +/- 61.7
  Background counts = 3434.9
  Rate = 0.04 +/- 0.007
[Sun Jun 16 06:58:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:58:58 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 06:58:58 2013] Source does appear to be extended
[Sun Jun 16 06:58:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.70
[Sun Jun 16 06:58:58 2013] Source is asymmetric
[Sun Jun 16 06:58:58 2013] Source is confused with source 2
[Sun Jun 16 06:59:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:59:18 2013] Initial guess for spatial extent in simple fitting = 15.91"
[Sun Jun 16 06:59:18 2013] source mask rpix=3.7, npix_max = 69, mask sum = 58, frac = 0.839
[Sun Jun 16 06:59:18 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 15.91"
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src14.csv
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src14.csv
[Sun Jun 16 12:25:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 16 12:25:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:41:42 2013] Warning, spatial fit 14 centroid is now closest to src. 14
[Sun Jun 16 12:41:42 2013] Spatial fit model total counts = 4026.120000, observed total counts = 3737.000000
[Sun Jun 16 12:41:42 2013] Offset between fit and detection position for source 18 = 0.072704 pixels
[Sun Jun 16 12:41:42 2013] Warning, changing simple spatial fit ID from 14 to 15
[Sun Jun 16 12:41:42 2013] 3804.355000 total counts/ 3452.260000 bgd. counts: snr = 5.992501
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.072704 pixels
  Position = (158.8, 245.9) = 10 38 56.34 41 41 32.1
  Extent = 24.2 (20.4-48.3)" x 7.4 (5.0-11.7)", rotation angle = 322 (312-331) degrees
  Source counts = 352.1 +/- 61.7
  Background counts = 3452.3
  Rate = 0.04 +/- 0.007
[Sun Jun 16 12:41:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 12:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 12:41:43 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 12:41:43 2013] Source does appear to be extended
[Sun Jun 16 12:41:43 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.74
[Sun Jun 16 12:41:43 2013] Source is asymmetric
[Sun Jun 16 12:42:03 2013] XMMSAS src. selection expression = ellipse(13764.630000, 21342.038000, 1449.612042, 442.095613, 321.879000, X, Y)
[Sun Jun 16 12:42:03 2013] Writing source region out to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src18_src.reg
[Sun Jun 16 12:42:03 2013] Extracting stamp from image fullrun_pn_xmm0046940101_pi300-10000_cl_sm2.00.img.gz, (75, 163) - (242, 329)
[Sun Jun 16 12:42:03 2013] XMMSAS bgd. selection expression = annulus(13764.630000, 21342.038000, 2416.020070, 4832.040139, X, Y) && !ellipse(16352.432388, 23013.657959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14101.896200, 21411.476000, 1895.960055, 1895.960055, 0.000000, X, Y) && !ellipse(14924.033264, 20756.705170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18195.297516, 24068.684296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17091.048000, 22844.360000, 1564.664045, 1564.664045, 0.000000, X, Y) && !ellipse(15840.364853, 22617.904602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16087.670212, 22162.132980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16771.171661, 21879.125443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14698.000000, 21818.126144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16435.692000, 21013.588000, 1695.544049, 1695.544049, 0.000000, X, Y) && !ellipse(13306.002655, 20918.075195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13937.181442, 20835.393600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12238.440598, 20364.694077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13221.590000, 20111.330000, 1033.456030, 1033.456030, 0.000000, X, Y) && !ellipse(11253.064972, 19702.796600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10599.281265, 19266.581924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11039.248825, 18879.198547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10415.640190, 18757.318100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10800.038651, 18069.977478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11578.699005, 17157.308502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18999.987778, 23859.951202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18088.026000, 23603.582000, 1618.552047, 1618.552047, 0.000000, X, Y) && !ellipse(17073.291428, 21234.992767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18376.654000, 19870.840000, 1633.984047, 1633.984047, 0.000000, X, Y)
[Sun Jun 16 12:42:03 2013] Writing fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src18.gif
[Sun Jun 16 12:59:25 2013] Mean detx,y = (-13787.62, -525.12) 
[Sun Jun 16 12:59:28 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 13:00:06 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 13:00:06 2013] Setting source spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Jun 16 13:00:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Jun 16 14:41:48 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:41:49 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 3179.00
[Sun Jun 16 14:41:49 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 47204.00
[Sun Jun 16 14:41:49 2013] Got source and background scale factors 1790450.000000, 33860183.000000
[Sun Jun 16 14:41:49 2013] User source parameters:
  Position = (158.8, 245.9) = 10 38 56.34 41 41 32.1
  Extent = 24.2 (20.4-48.3)" x 7.4 (5.0-11.7)", rotation angle = 322 (312-331) degrees
  Source aperture counts = 683.0 +/- 57.4
  Background aperture counts = 2496.0
  Rate = 0.08 +/- 0.007

[Sun Jun 16 14:41:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:41:58 2013] Using photon index=1.80, rate=0.0419, arf fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src18.arf
[Sun Jun 16 14:41:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:41:58 2013] Updating source flux to 3.1e-13
[Sun Jun 16 14:42:07 2013] Flag p found in src. 18 procflags, skipping spectral fitting
[Sun Jun 16 14:42:07 2013] Flag c found in src. 18 procflags, skipping spectral fitting
[Sun Jun 16 14:42:13 2013] xmm0046940101/analysis//spectral/fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete