[Sun Jun 16 00:52:04 2013] Detection parameters:
  Position = (188.8, 260.9) = 10 38 44.69 41 42 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.2 +/- 33.9
  Background counts = 470.0
  Rate = 0.01 +/- 0.002

[Sun Jun 16 00:52:10 2013] Off-axis axis estimate = 8.40'
[Sun Jun 16 01:00:34 2013] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:00:34 2013] Initial guess for spatial extent in simple fitting = 10.63"
[Sun Jun 16 01:00:34 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.039
[Sun Jun 16 01:00:34 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.63"
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src9.csv
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src9.csv
[Sun Jun 16 06:32:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 16 06:32:42 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun 16 06:32:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 16 06:32:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:58:58 2013] Spatial fit model total counts = 5271.020000, observed total counts = 4348.000000
[Sun Jun 16 06:58:58 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 06:58:58 2013] Spatial fit model total counts = 4257.280000, observed total counts = 3910.000000
[Sun Jun 16 06:58:58 2013] Offset between fit and detection position for source 10 = 1.694369 pixels
[Sun Jun 16 06:58:58 2013] Warning, changing simple spatial fit ID from 9 to 7
[Sun Jun 16 06:58:58 2013] 4190.651900 total counts/ 4174.310000 bgd. counts: snr = 0.252936
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.694369 pixels
  Position = (187.6, 262.1) = 10 38 45.17 41 42 43.2
  Extent = 2.7 (2.6-3.1)", rotation angle = 0
  Source counts = 16.3 +/- 64.7
  Background counts = 4174.3
  Rate = 0.002 +/- 0.008
  Deleting source due to low Poisson probability