[Sun Jun 16 00:52:00 2013] Detection parameters:
  Position = (188.5, 265.1) = 10 38 44.81 41 43 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 300.3 +/- 35.3
  Background counts = 469.3
  Rate = 0.02 +/- 0.002

[Sun Jun 16 00:52:10 2013] Off-axis axis estimate = 8.33'
[Sun Jun 16 01:00:34 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:00:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 01:00:34 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Sun Jun 16 01:00:34 2013] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.609
[Sun Jun 16 01:00:34 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.59"
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 16 06:32:40 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 16 06:32:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 16 06:32:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:32:41 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 16 06:32:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun 16 06:32:41 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 16 06:32:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun 16 06:32:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:58:58 2013] Warning, spatial fit 1 centroid is now closest to src. 10
[Sun Jun 16 06:58:58 2013] Spatial fit model total counts = 3910.940000, observed total counts = 3487.000000
[Sun Jun 16 06:58:58 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 16 06:58:58 2013] Source 1 is offset by 0.292188 and 2.858000 pixels which is larger than
2 X fitted extent = 1.278032 x 1.278032, not incorporating fit results
[Sun Jun 16 06:58:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:58:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:58:58 2013] Assessing source extent using major
[Sun Jun 16 06:58:58 2013] Source does appear to be extended
[Sun Jun 16 06:58:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:58:58 2013] Source is confused with source 8
[Sun Jun 16 06:58:58 2013] Source is confused with source 9
[Sun Jun 16 06:59:18 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:59:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 06:59:18 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Sun Jun 16 06:59:18 2013] source mask rpix=2.4, npix_max = 34, mask sum = 21, frac = 0.609
[Sun Jun 16 06:59:18 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.59"
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src1.csv
[Sun Jun 16 12:25:46 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 16 12:25:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src1.csv
[Sun Jun 16 12:25:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 16 12:25:47 2013] fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 16 12:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 16 12:25:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:41:42 2013] Warning, spatial fit 1 centroid is now closest to src. 9
[Sun Jun 16 12:41:42 2013] Source 1 is offset by 0.292188 and 2.858000 pixels which is larger than
2 X fitted extent = 1.278032 x 1.278032, not incorporating fit results
[Sun Jun 16 12:41:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 12:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 12:41:43 2013] Assessing source extent using major
[Sun Jun 16 12:41:43 2013] Source does appear to be extended
[Sun Jun 16 12:41:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 12:42:02 2013] XMMSAS src. selection expression = ellipse(16352.432388, 23013.657959, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 12:42:02 2013] Writing source region out to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 16 12:42:02 2013] Extracting stamp from image fullrun_pn_xmm0046940101_pi300-10000_cl_sm2.00.img.gz, (151, 228) - (226, 303)
[Sun Jun 16 12:42:02 2013] XMMSAS bgd. selection expression = annulus(16352.432388, 23013.657959, 1087.500000, 2175.000000, X, Y) && !ellipse(14101.896200, 21411.476000, 1895.960055, 1895.960055, 0.000000, X, Y) && !ellipse(14924.033264, 20756.705170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18195.297516, 24068.684296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17091.048000, 22844.360000, 1564.664045, 1564.664045, 0.000000, X, Y) && !ellipse(15840.364853, 22617.904602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16087.670212, 22162.132980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16771.171661, 21879.125443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14698.000000, 21818.126144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16435.692000, 21013.588000, 1695.544049, 1695.544049, 0.000000, X, Y) && !ellipse(13764.630000, 21342.038000, 1932.816056, 589.460817, 321.879000, X, Y) && !ellipse(13937.181442, 20835.393600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13221.590000, 20111.330000, 1033.456030, 1033.456030, 0.000000, X, Y) && !ellipse(18999.987778, 23859.951202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18088.026000, 23603.582000, 1618.552047, 1618.552047, 0.000000, X, Y) && !ellipse(17073.291428, 21234.992767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18376.654000, 19870.840000, 1633.984047, 1633.984047, 0.000000, X, Y)
[Sun Jun 16 12:42:02 2013] Writing fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src1.gif
[Sun Jun 16 12:42:20 2013] Mean detx,y = (-10787.14, -711.69) 
[Sun Jun 16 12:42:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 12:42:47 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 12:42:47 2013] Setting source spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 16 12:42:47 2013] Setting bgd. spectrum file to fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 16 13:36:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 13:36:22 2013] rmf not generated due to insufficient counts
[Sun Jun 16 14:41:45 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:41:45 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1957.00
[Sun Jun 16 14:41:45 2013] Total counts from fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 3183.00
[Sun Jun 16 14:41:45 2013] Got source and background scale factors 973205.000000, 2786937.000000
[Sun Jun 16 14:41:45 2013] User source parameters:
  Position = (188.5, 265.1) = 10 38 44.81 41 43 10.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 845.5 +/- 45.2
  Background aperture counts = 1111.5
  Rate = 0.1 +/- 0.005

[Sun Jun 16 14:41:45 2013] Updating counts from extracted products
[Sun Jun 16 14:41:45 2013] Set source signif. to 845.49/33.34 = 25.36
[Sun Jun 16 14:41:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:41:58 2013] Using photon index=1.80, rate=0.101, arf fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 16 14:41:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:41:58 2013] Updating source flux to 7.3e-13
[Sun Jun 16 14:42:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 14:42:13 2013] xmm0046940101/analysis//spectral/fullrun_pn_xmm0046940101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete