[Sun Jun 16 00:52:12 2013] Detection parameters:
  Position = (202.3, 271.8) = 10 38 39.44 41 43 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.2 +/- 24.5
  Background counts = 225.8
  Rate = 0.01 +/- 0.002

[Sun Jun 16 00:52:14 2013] Off-axis axis estimate = 7.23'
[Sun Jun 16 06:32:43 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 06:32:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 16 06:32:43 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Sun Jun 16 06:32:43 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.951
[Sun Jun 16 06:32:43 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.04"
[Sun Jun 16 06:56:27 2013] fullrun_mos1_xmm0046940101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 16 06:56:27 2013] fullrun_mos1_xmm0046940101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 16 06:56:27 2013] Fit fullrun_mos1_xmm0046940101_pi300-10000_cl_pass0_src3 appears to have run properly
[Sun Jun 16 06:56:27 2013] fullrun_mos1_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 16 06:56:27 2013] fullrun_mos1_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 16 06:56:27 2013] Fit fullrun_mos1_xmm0046940101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jun 16 06:59:00 2013] Spatial fit model total counts = 1919.960000, observed total counts = 1897.000000
[Sun Jun 16 06:59:00 2013] Offset between fit and detection position for source 4 = 2.134016 pixels
[Sun Jun 16 06:59:00 2013] 1923.426000 total counts/ 1634.080000 bgd. counts: snr = 7.157821
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.134016 pixels
  Position = (204.2, 270.9) = 10 38 38.70 41 43 21.3
  Extent = 16.1 (9.7-20.1)", rotation angle = 0
  Source counts = 289.3 +/- 43.9
  Background counts = 1634.1
  Rate = 0.02 +/- 0.003
[Sun Jun 16 06:59:00 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 06:59:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 06:59:00 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 06:59:00 2013] Source does appear to be extended
[Sun Jun 16 06:59:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 06:59:00 2013] Source is confused with source 3
[Sun Jun 16 12:25:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 16 12:25:48 2013] Initial guess for spatial extent in simple fitting = 16.06"
[Sun Jun 16 12:25:48 2013] source mask rpix=3.7, npix_max = 70, mask sum = 63, frac = 0.896
[Sun Jun 16 12:25:48 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 16.06"
[Sun Jun 16 12:39:28 2013] fullrun_mos1_xmm0046940101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 16 12:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940101_pi300-10000_cl_pass1_src3.csv
[Sun Jun 16 12:39:28 2013] fullrun_mos1_xmm0046940101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 16 12:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940101_pi300-10000_cl_pass1_src3.csv
[Sun Jun 16 12:39:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0046940101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0046940101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:39:28 2013] fullrun_mos1_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 16 12:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 16 12:39:28 2013] fullrun_mos1_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 16 12:39:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun 16 12:39:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0046940101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 12:41:45 2013] Warning, spatial fit 3 centroid is now closest to src. 6
[Sun Jun 16 12:41:45 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 12:41:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 12:41:45 2013] Assessing source extent using major axis lower bound
[Sun Jun 16 12:41:45 2013] Source does appear to be extended
[Sun Jun 16 12:41:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 14:17:32 2013] XMMSAS src. selection expression = ellipse(17720.314800, 23516.174000, 963.852028, 963.852028, 0.000000, X, Y)
[Sun Jun 16 14:17:32 2013] Writing source region out to fullrun_mos1_xmm0046940101_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 16 14:17:32 2013] Extracting stamp from image fullrun_mos1_xmm0046940101_pi300-10000_cl_sm2.00.img.gz, (149, 215) - (260, 326)
[Sun Jun 16 14:17:32 2013] XMMSAS bgd. selection expression = annulus(17720.314800, 23516.174000, 1606.420046, 3212.840092, X, Y) && !ellipse(18569.756000, 23982.118000, 2194.152063, 737.923221, 325.265000, X, Y)
[Sun Jun 16 14:17:32 2013] Writing fullrun_mos1_xmm0046940101_pi300-10000_pass1_cl_src4.gif
[Sun Jun 16 14:19:00 2013] Mean detx,y = (709.49, -9638.57) 
[Sun Jun 16 14:19:02 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 14:19:31 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 14:19:31 2013] Setting source spectrum file to fullrun_mos1_xmm0046940101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 16 14:19:31 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0046940101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 16 14:42:00 2013] Updating aperture counts using extracted products
[Sun Jun 16 14:42:00 2013] Total counts from fullrun_mos1_xmm0046940101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 2690.00
[Sun Jun 16 14:42:00 2013] Total counts from fullrun_mos1_xmm0046940101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 19135.00
[Sun Jun 16 14:42:00 2013] Got source and background scale factors 2640616.000000, 20827601.000000
[Sun Jun 16 14:42:00 2013] User source parameters:
  Position = (204.2, 270.9) = 10 38 38.70 41 43 21.3
  Extent = 16.1 (9.7-20.1)", rotation angle = 0
  Source aperture counts = 264.0 +/- 52.9
  Background aperture counts = 2426.0
  Rate = 0.02 +/- 0.004

[Sun Jun 16 14:42:01 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 14:42:01 2013] Using photon index=1.80, rate=0.0193, arf fullrun_mos1_xmm0046940101_pi300-10000_pass1_cl_src4.arf
[Sun Jun 16 14:42:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 14:42:01 2013] Updating source flux to 3.4e-13
[Sun Jun 16 14:42:02 2013] Flag c found in src. 4 procflags, skipping spectral fitting
[Sun Jun 16 14:42:05 2013] xmm0046940101/analysis//spectral/fullrun_mos1_xmm0046940101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete