[Wed Aug 29 07:23:48 2012] Detection parameters:
  Position = (382.0, 444.0) = 3 40 45.15 -44 41 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.3 +/- 14.0
  Background counts = 19.4
  Rate = 0.003 +/- 0.0004

[Wed Aug 29 07:23:48 2012] Off-axis axis estimate = 12.17'
[Wed Aug 29 08:08:23 2012] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 08:08:23 2012] Initial guess for spatial extent in simple fitting = 12.51"
[Wed Aug 29 08:08:23 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.789
[Wed Aug 29 08:08:23 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.51"
[Wed Aug 29 08:27:49 2012] fullrun_mos2_xmm0045940301_pi300-10000_cl_pass0_src12.ximg exists
[Wed Aug 29 08:27:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0045940301_pi300-10000_cl_pass0_src12.csv
[Wed Aug 29 08:27:49 2012] fullrun_mos2_xmm0045940301_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Aug 29 08:27:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0045940301_pi300-10000_cl_pass0_src12.csv
[Wed Aug 29 08:27:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0045940301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0045940301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 08:27:49 2012] fullrun_mos2_xmm0045940301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Aug 29 08:27:49 2012] fullrun_mos2_xmm0045940301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Aug 29 08:27:49 2012] Fit fullrun_mos2_xmm0045940301_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Aug 29 08:27:57 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.271429 pixels away
[Wed Aug 29 08:27:57 2012] Spatial fit model total counts = -57.232300, observed total counts = 226.000000
[Wed Aug 29 08:27:57 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 29 08:27:57 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 08:27:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 08:27:57 2012] Assessing source extent using major
[Wed Aug 29 08:27:57 2012] Source does appear to be extended
[Wed Aug 29 08:27:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 09:12:01 2012] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 09:12:01 2012] Initial guess for spatial extent in simple fitting = 12.51"
[Wed Aug 29 09:12:01 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.789
[Wed Aug 29 09:12:01 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 12.51"
[Wed Aug 29 09:29:10 2012] fullrun_mos2_xmm0045940301_pi300-10000_cl_pass1_src12.ximg exists
[Wed Aug 29 09:29:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0045940301_pi300-10000_cl_pass1_src12.csv
[Wed Aug 29 09:29:10 2012] fullrun_mos2_xmm0045940301_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Aug 29 09:29:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0045940301_pi300-10000_cl_pass1_src12.csv
[Wed Aug 29 09:29:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0045940301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0045940301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 09:29:10 2012] fullrun_mos2_xmm0045940301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Aug 29 09:29:10 2012] fullrun_mos2_xmm0045940301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Aug 29 09:29:10 2012] Fit fullrun_mos2_xmm0045940301_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Aug 29 09:29:18 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.068258 pixels away
[Wed Aug 29 09:29:18 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.679595 pixels away
[Wed Aug 29 09:29:18 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 09:29:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 09:29:18 2012] Assessing source extent using major
[Wed Aug 29 09:29:18 2012] Source does appear to be extended
[Wed Aug 29 09:29:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 09:44:01 2012] XMMSAS src. selection expression = ellipse(33186.479706, 38578.278687, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 29 09:44:01 2012] Writing source region out to fullrun_mos2_xmm0045940301_pi300-10000_pass1_cl_src3_src.reg
[Wed Aug 29 09:44:01 2012] Extracting stamp from image fullrun_mos2_xmm0045940301_pi300-10000_cl_sm2.00.img.gz, (345, 406) - (420, 481)
[Wed Aug 29 09:44:01 2012] XMMSAS bgd. selection expression = annulus(33186.479706, 38578.278687, 1087.500000, 2175.000000, X, Y) && !ellipse(34128.473480, 38514.263275, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 29 09:44:01 2012] Writing fullrun_mos2_xmm0045940301_pi300-10000_pass1_cl_src3.gif
[Wed Aug 29 09:45:57 2012] Mean detx,y = (8362.42, -14347.77) 
[Wed Aug 29 09:45:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 09:46:06 2012] grppha failed
[Wed Aug 29 09:46:06 2012] Setting source spectrum file to fullrun_mos2_xmm0045940301_pi300-10000_pass1_cl_src3_src.pi.gz
[Wed Aug 29 09:46:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0045940301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Aug 29 09:47:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 29 09:47:31 2012] rmf not generated due to insufficient counts
[Wed Aug 29 09:48:03 2012] Updating aperture counts using extracted products
[Wed Aug 29 09:48:03 2012] Error reading totcts from fullrun_mos2_xmm0045940301_pi300-10000_pass1_cl_src3_src.pi.gz
[Wed Aug 29 09:48:03 2012] No arf file for this source, not re-computing flux
[Wed Aug 29 09:48:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug 29 09:48:06 2012] xmm0045940301/analysis//spectral/fullrun_mos2_xmm0045940301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete