[Tue Jun  5 19:53:48 2012] Detection parameters:
  Position = (267.9, 278.1) = 18 5 39.81 2 27 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18.3 +/- 5.8
  Background counts = 3.1
  Rate = 0.002 +/- 0.0007

[Tue Jun  5 19:53:48 2012] Off-axis axis estimate = 2.66'
[Tue Jun  5 21:05:51 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 21:05:51 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Tue Jun  5 21:05:51 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.767
[Tue Jun  5 21:05:51 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.76"
[Tue Jun  5 21:24:24 2012] fullrun_mos2_xmm0044741401_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jun  5 21:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044741401_pi300-10000_cl_pass0_src10.csv
[Tue Jun  5 21:24:24 2012] fullrun_mos2_xmm0044741401_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jun  5 21:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044741401_pi300-10000_cl_pass0_src10.csv
[Tue Jun  5 21:24:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044741401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044741401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 21:24:24 2012] fullrun_mos2_xmm0044741401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jun  5 21:24:24 2012] fullrun_mos2_xmm0044741401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jun  5 21:24:24 2012] Fit fullrun_mos2_xmm0044741401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Jun  5 21:24:38 2012] Source 8 is offset by -7.226151 and 6.055604 pixels which is larger than
2 X fitted extent = 0.891835 x 0.891835, not incorporating fit results
[Tue Jun  5 21:24:38 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 21:24:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 21:24:38 2012] Assessing source extent using major
[Tue Jun  5 21:24:38 2012] Source does appear to be extended
[Tue Jun  5 21:24:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 23:04:05 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 23:04:05 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Tue Jun  5 23:04:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.767
[Tue Jun  5 23:04:05 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.76"
[Tue Jun  5 23:19:01 2012] fullrun_mos2_xmm0044741401_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jun  5 23:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044741401_pi300-10000_cl_pass1_src9.csv
[Tue Jun  5 23:19:01 2012] fullrun_mos2_xmm0044741401_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jun  5 23:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044741401_pi300-10000_cl_pass1_src9.csv
[Tue Jun  5 23:19:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044741401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044741401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 23:19:01 2012] fullrun_mos2_xmm0044741401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jun  5 23:19:01 2012] fullrun_mos2_xmm0044741401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jun  5 23:19:01 2012] Fit fullrun_mos2_xmm0044741401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Jun  5 23:19:07 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 99.527856 pixels away
[Tue Jun  5 23:19:07 2012] Spatial fit model total counts = 37.000000, observed total counts = 37.000000
[Tue Jun  5 23:19:07 2012] Offset between fit and detection position for source 8 = 0.270534 pixels
[Tue Jun  5 23:19:07 2012] 38.004300 total counts/ 24.350500 bgd. counts: snr = 2.766939
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.270534 pixels
  Position = (267.7, 277.9) = 18 5 39.87 2 27 5.2
  Extent = 5.3 (3.3-14.0)", rotation angle = 0
  Source counts = 13.7 +/- 6.2
  Background counts = 24.4
  Rate = 0.001 +/- 0.0007
[Tue Jun  5 23:19:07 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 23:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 23:19:07 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 23:19:07 2012] Source does appear to be extended
[Tue Jun  5 23:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 23:54:46 2012] XMMSAS src. selection expression = ellipse(23242.760000, 24126.728000, 319.519992, 319.519992, 0.000000, X, Y)
[Tue Jun  5 23:54:46 2012] Writing source region out to fullrun_mos2_xmm0044741401_pi300-10000_pass1_cl_src8_src.reg
[Tue Jun  5 23:54:46 2012] Extracting stamp from image fullrun_mos2_xmm0044741401_pi300-10000_cl_sm2.00.img.gz, (249, 260) - (286, 296)
[Tue Jun  5 23:54:46 2012] XMMSAS bgd. selection expression = annulus(23242.760000, 24126.728000, 532.533320, 1065.066639, X, Y)
[Tue Jun  5 23:54:46 2012] Writing fullrun_mos2_xmm0044741401_pi300-10000_pass1_cl_src8.gif
[Wed Jun  6 00:00:11 2012] Mean detx,y = (3987.06, -3232.53) 
[Wed Jun  6 00:00:12 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  6 00:00:18 2012] Binned source spectrum to 10 counts/bin
[Wed Jun  6 00:00:18 2012] Setting source spectrum file to fullrun_mos2_xmm0044741401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jun  6 00:00:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0044741401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jun  6 00:01:09 2012] Not generating rmf since there are only 13 counts
[Wed Jun  6 00:01:09 2012] rmf not generated due to insufficient counts
[Wed Jun  6 00:01:28 2012] Updating aperture counts using extracted products
[Wed Jun  6 00:01:28 2012] Error reading totcts from fullrun_mos2_xmm0044741401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jun  6 00:01:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun  6 00:01:28 2012] Using photon index=1.80, rate=0.00148, arf fullrun_mos2_xmm0044741401_pi300-10000_pass1_cl_src8.arf
[Wed Jun  6 00:01:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  6 00:01:28 2012] Updating source flux to 2.3e-14
[Wed Jun  6 00:01:44 2012] Flag b found in src. 8 procflags, skipping spectral fitting
[Wed Jun  6 00:01:44 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun  6 00:01:45 2012] xmm0044741401/analysis//spectral/fullrun_mos2_xmm0044741401_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete