[Mon Jul  2 13:48:15 2012] Detection parameters:
  Position = (300.8, 310.2) = 18 5 30.16 2 29 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.1 +/- 10.3
  Background counts = 5.6
  Rate = 0.004 +/- 0.001

[Mon Jul  2 13:48:15 2012] Off-axis axis estimate = 0.87'
[Mon Jul  2 14:21:48 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 14:21:48 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Mon Jul  2 14:21:48 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.926
[Mon Jul  2 14:21:48 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.86"
[Mon Jul  2 14:35:57 2012] fullrun_mos2_xmm0044741301_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jul  2 14:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044741301_pi300-10000_cl_pass0_src7.csv
[Mon Jul  2 14:35:57 2012] fullrun_mos2_xmm0044741301_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jul  2 14:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044741301_pi300-10000_cl_pass0_src7.csv
[Mon Jul  2 14:35:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044741301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044741301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 14:35:57 2012] fullrun_mos2_xmm0044741301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jul  2 14:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044741301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon Jul  2 14:35:57 2012] fullrun_mos2_xmm0044741301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jul  2 14:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044741301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon Jul  2 14:35:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044741301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044741301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 14:36:03 2012] Warning, spatial fit 7 centroid is now closest to src. 1
[Mon Jul  2 14:36:03 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 14:36:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 14:36:03 2012] Assessing source extent using major
[Mon Jul  2 14:36:03 2012] Source does appear to be extended
[Mon Jul  2 14:36:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 15:02:58 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 15:02:58 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Mon Jul  2 15:02:58 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.926
[Mon Jul  2 15:02:58 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 6.86"
[Mon Jul  2 15:22:27 2012] fullrun_mos2_xmm0044741301_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jul  2 15:22:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044741301_pi300-10000_cl_pass1_src7.csv
[Mon Jul  2 15:22:27 2012] fullrun_mos2_xmm0044741301_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jul  2 15:22:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044741301_pi300-10000_cl_pass1_src7.csv
[Mon Jul  2 15:22:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044741301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044741301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 15:22:27 2012] fullrun_mos2_xmm0044741301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jul  2 15:22:27 2012] fullrun_mos2_xmm0044741301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jul  2 15:22:27 2012] Fit fullrun_mos2_xmm0044741301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Jul  2 15:22:32 2012] Warning, spatial fit 7 centroid is now closest to src. 1
[Mon Jul  2 15:22:32 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 15:22:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 15:22:32 2012] Assessing source extent using major
[Mon Jul  2 15:22:32 2012] Source does appear to be extended
[Mon Jul  2 15:22:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 16:10:20 2012] XMMSAS src. selection expression = ellipse(26120.806885, 26939.851562, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  2 16:10:20 2012] Writing source region out to fullrun_mos2_xmm0044741301_pi300-10000_pass1_cl_src10_src.reg
[Mon Jul  2 16:10:20 2012] Extracting stamp from image fullrun_mos2_xmm0044741301_pi300-10000_cl_sm2.00.img.gz, (263, 273) - (338, 348)
[Mon Jul  2 16:10:20 2012] XMMSAS bgd. selection expression = annulus(26120.806885, 26939.851562, 1087.500000, 2175.000000, X, Y) && !ellipse(26955.160461, 27512.368805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.656433, 26687.079498, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  2 16:10:20 2012] Writing fullrun_mos2_xmm0044741301_pi300-10000_pass1_cl_src10.gif
[Mon Jul  2 16:13:02 2012] Mean detx,y = (683.94, -462.87) 
[Mon Jul  2 16:13:02 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 16:13:07 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 16:13:07 2012] Setting source spectrum file to fullrun_mos2_xmm0044741301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jul  2 16:13:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0044741301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jul  2 16:14:14 2012] Not generating rmf since there are only 38 counts
[Mon Jul  2 16:14:14 2012] rmf not generated due to insufficient counts
[Mon Jul  2 16:14:41 2012] Updating aperture counts using extracted products
[Mon Jul  2 16:14:41 2012] Error reading totcts from fullrun_mos2_xmm0044741301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jul  2 16:14:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 16:14:41 2012] Using photon index=1.80, rate=0.00422, arf fullrun_mos2_xmm0044741301_pi300-10000_pass1_cl_src10.arf
[Mon Jul  2 16:14:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 16:14:41 2012] Updating source flux to 5.4e-14
[Mon Jul  2 16:14:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul  2 16:14:54 2012] xmm0044741301/analysis//spectral/fullrun_mos2_xmm0044741301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete