[Fri May 17 22:20:26 2013] Detection parameters:
  Position = (452.4, 288.4) = 11 49 58.53 1 43 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.8 +/- 12.3
  Background counts = 30.5
  Rate = 0.001 +/- 0.0003

[Fri May 17 22:20:26 2013] Off-axis axis estimate = 11.19'
[Fri May 17 22:21:00 2013] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:00 2013] Initial guess for spatial extent in simple fitting = 12.02"
[Fri May 17 22:21:00 2013] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.150
[Fri May 17 22:21:00 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 12.02"
[Fri May 17 22:21:02 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src52.ximg exists
[Fri May 17 22:21:02 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src52_1.ximg exists
[Fri May 17 22:21:02 2013] Fit fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src52 appears to have run properly
[Fri May 17 22:21:03 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Fri May 17 22:21:03 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Fri May 17 22:21:03 2013] Fit fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Fri May 17 22:21:23 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 10.506946 pixels away
[Fri May 17 22:21:23 2013] Spatial fit model total counts = 560.223000, observed total counts = 549.000000
[Fri May 17 22:21:23 2013] Offset between fit and detection position for source 53 = 1.418140 pixels
[Fri May 17 22:21:23 2013] 341.007000 total counts/ 194.258000 bgd. counts: snr = 10.528965
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 1.418140 pixels
  Position = (453.7, 287.9) = 11 49 58.15 1 43 31.9
  Extent = 15.1 (5.0-24.0)", rotation angle = 0
  Source counts = 146.7 +/- 18.5
  Background counts = 194.3
  Rate = 0.003 +/- 0.0004
[Fri May 17 22:21:23 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:23 2013] Assessing source extent using major axis lower bound
[Fri May 17 22:21:23 2013] Source does appear to be extended
[Fri May 17 22:21:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:21:23 2013] Source is confused with source 22
[Fri May 17 22:21:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 22:21:56 2013] Initial guess for spatial extent in simple fitting = 15.14"
[Fri May 17 22:21:56 2013] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.010
[Fri May 17 22:21:56 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 15.14"
[Fri May 17 22:21:57 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src47.ximg exists
[Fri May 17 22:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src47.csv
[Fri May 17 22:21:57 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src47_1.ximg exists
[Fri May 17 22:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src47.csv
[Fri May 17 22:21:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:58 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Fri May 17 22:21:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src47.csv
[Fri May 17 22:21:58 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Fri May 17 22:21:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src47.csv
[Fri May 17 22:21:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:20 2013] Warning, spatial fit 47 centroid is now closest to src. 22
[Fri May 17 22:22:20 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:20 2013] Assessing source extent using major axis lower bound
[Fri May 17 22:22:20 2013] Source does appear to be extended
[Fri May 17 22:22:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:23:03 2013] XMMSAS src. selection expression = ellipse(39424.507800, 24999.923400, 908.394026, 908.394026, 0.000000, X, Y)
[Fri May 17 22:23:03 2013] Not overwriting source region fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src53_src.reg
[Fri May 17 22:23:03 2013] Extracting stamp from image fullrun_pn_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (402, 236) - (506, 340)
[Fri May 17 22:23:03 2013] XMMSAS bgd. selection expression = annulus(39424.507800, 24999.923400, 1513.990044, 3027.980087, X, Y) && !ellipse(35893.284729, 28136.430786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39413.335846, 24329.814392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36235.382599, 22371.589569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39319.536316, 25861.121124, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 22:23:03 2013] Writing fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src53.gif
[Fri May 17 22:28:48 2013] Mean detx,y = (10643.13, 8154.97) 
[Fri May 17 22:28:51 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 22:29:39 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 22:29:40 2013] Setting source spectrum file to fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Fri May 17 22:29:40 2013] Setting bgd. spectrum file to fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Fri May 17 23:25:00 2013] Updating aperture counts using extracted products
[Fri May 17 23:25:00 2013] Total counts from fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 768.00
[Fri May 17 23:25:01 2013] Total counts from fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src53_bgd.pi.gz = 2655.00
[Fri May 17 23:25:01 2013] Got source and background scale factors 2286835.000000, 16354587.000000
[Fri May 17 23:25:01 2013] User source parameters:
  Position = (453.7, 287.9) = 11 49 58.15 1 43 31.9
  Extent = 15.1 (5.0-24.0)", rotation angle = 0
  Source aperture counts = 396.8 +/- 28.7
  Background aperture counts = 371.2
  Rate = 0.009 +/- 0.0006

[Fri May 17 23:25:03 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:03 2013] Using photon index=1.80, rate=0.00321, arf fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src53.arf
[Fri May 17 23:25:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:03 2013] Updating source flux to 2.3e-14
[Fri May 17 23:25:31 2013] Flag c found in src. 53 procflags, skipping spectral fitting
[Fri May 17 23:25:37 2013] xmm0044740201/analysis//spectral/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete