[Fri May 17 22:20:25 2013] Detection parameters:
  Position = (340.6, 371.5) = 11 50 30.97 1 49 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.1 +/- 12.9
  Background counts = 37.0
  Rate = 0.002 +/- 0.0004

[Fri May 17 22:20:26 2013] Off-axis axis estimate = 6.12'
[Fri May 17 22:21:00 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:00 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Fri May 17 22:21:00 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.870
[Fri May 17 22:21:00 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 9.49"
[Fri May 17 22:21:02 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src44.ximg exists
[Fri May 17 22:21:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src44.csv
[Fri May 17 22:21:02 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src44_1.ximg exists
[Fri May 17 22:21:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src44.csv
[Fri May 17 22:21:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:03 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Fri May 17 22:21:03 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Fri May 17 22:21:03 2013] Fit fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Fri May 17 22:21:23 2013] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 10.062490 pixels away
[Fri May 17 22:21:23 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:23 2013] Assessing source extent using major
[Fri May 17 22:21:23 2013] Source does appear to be extended
[Fri May 17 22:21:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:21:56 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:56 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Fri May 17 22:21:56 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.870
[Fri May 17 22:21:56 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 9.49"
[Fri May 17 22:21:57 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src40.ximg exists
[Fri May 17 22:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src40.csv
[Fri May 17 22:21:57 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri May 17 22:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src40.csv
[Fri May 17 22:21:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:58 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri May 17 22:21:58 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri May 17 22:21:58 2013] Fit fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Fri May 17 22:22:20 2013] Spatial fit model total counts = 396.998000, observed total counts = 397.000000
[Fri May 17 22:22:20 2013] Offset between fit and detection position for source 44 = 0.220857 pixels
[Fri May 17 22:22:20 2013] 395.021500 total counts/ 344.901000 bgd. counts: snr = 2.698784
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.220857 pixels
  Position = (340.4, 371.6) = 11 50 31.03 1 49 35.8
  Extent = 5.5 (3.7-8.2)", rotation angle = 0
  Source counts = 50.1 +/- 19.9
  Background counts = 344.9
  Rate = 0.001 +/- 0.0004
[Fri May 17 22:22:20 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:20 2013] Assessing source extent using major axis lower bound
[Fri May 17 22:22:20 2013] Source does appear to be extended
[Fri May 17 22:22:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:23:03 2013] XMMSAS src. selection expression = ellipse(29564.935400, 32277.597000, 331.511410, 331.511410, 0.000000, X, Y)
[Fri May 17 22:23:03 2013] Not overwriting source region fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44_src.reg
[Fri May 17 22:23:03 2013] Extracting stamp from image fullrun_pn_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (321, 353) - (359, 391)
[Fri May 17 22:23:03 2013] XMMSAS bgd. selection expression = annulus(29564.935400, 32277.597000, 552.519016, 1105.038032, X, Y) && !ellipse(28140.385522, 33010.529200, 435.904813, 435.904813, 0.000000, X, Y) && !ellipse(30571.068756, 30579.886108, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 22:23:03 2013] Writing fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44.gif
[Fri May 17 22:23:10 2013] ../../xmm0044740201/products/events/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44_src.evt and ../../xmm0044740201/products/events/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44_bgd.evt exist, delete to re-create
[Fri May 17 22:23:11 2013] Mean detx,y = (4941.89, -2723.31) 
[Fri May 17 22:23:11 2013] ../../xmm0044740201/products/images/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44_src.img and ../../xmm0044740201/products/images/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44_bgd.img exist, delete to re-create
[Fri May 17 22:23:11 2013] ../../xmm0044740201/products/spectra/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44_src.pi and ../../xmm0044740201/products/spectra/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44_bgd.pi exist, delete to re-create
[Fri May 17 22:23:11 2013] Setting source spectrum file to fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44_src.pi.gz
[Fri May 17 22:23:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Fri May 17 23:14:33 2013] Not generating rmf since there are only 50 counts
[Fri May 17 23:14:33 2013] rmf not generated due to insufficient counts
[Fri May 17 23:24:59 2013] Updating aperture counts using extracted products
[Fri May 17 23:24:59 2013] Total counts from fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44_src.pi.gz = 116.00
[Fri May 17 23:24:59 2013] Total counts from fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44_bgd.pi.gz = 530.00
[Fri May 17 23:24:59 2013] Got source and background scale factors 1.000000, 1.000000
[Fri May 17 23:24:59 2013] User source parameters:
  Position = (340.4, 371.6) = 11 50 31.03 1 49 35.8
  Extent = 5.5 (3.7-8.2)", rotation angle = 0
  Source aperture counts = -414.0 +/- 11.8
  Background aperture counts = 530.0
  Rate = -0.009 +/- 0.0003

[Fri May 17 23:25:03 2013] No arf file for this source, not re-computing flux
[Fri May 17 23:25:31 2013] Source 44 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 17 23:25:37 2013] xmm0044740201/analysis//spectral/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete