[Fri May 17 22:20:25 2013] Detection parameters:
  Position = (355.8, 507.1) = 11 50 26.54 1 59 29.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.0 +/- 17.2
  Background counts = 26.6
  Rate = 0.004 +/- 0.0004

[Fri May 17 22:20:26 2013] Off-axis axis estimate = 15.69'
[Fri May 17 22:21:00 2013] Using EEF radius (= 14.27 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 22:21:00 2013] Initial guess for spatial extent in simple fitting = 14.27"
[Fri May 17 22:21:00 2013] source mask rpix=3.3, npix_max = 57, mask sum = 51, frac = 0.892
[Fri May 17 22:21:00 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 14.27"
[Fri May 17 22:21:01 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src30.ximg exists
[Fri May 17 22:21:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src30.csv
[Fri May 17 22:21:01 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri May 17 22:21:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src30.csv
[Fri May 17 22:21:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:02 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri May 17 22:21:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri May 17 22:21:02 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri May 17 22:21:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri May 17 22:21:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:23 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 18.389945 pixels away
[Fri May 17 22:21:23 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:23 2013] Assessing source extent using major
[Fri May 17 22:21:23 2013] Source does appear to be extended
[Fri May 17 22:21:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:21:56 2013] Using EEF radius (= 14.27 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:56 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 22:21:56 2013] Initial guess for spatial extent in simple fitting = 14.27"
[Fri May 17 22:21:56 2013] source mask rpix=3.3, npix_max = 57, mask sum = 51, frac = 0.892
[Fri May 17 22:21:56 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 14.27"
[Fri May 17 22:21:57 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src29.ximg exists
[Fri May 17 22:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src29.csv
[Fri May 17 22:21:57 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri May 17 22:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src29.csv
[Fri May 17 22:21:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:58 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri May 17 22:21:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Fri May 17 22:21:58 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri May 17 22:21:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Fri May 17 22:21:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:20 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 18.540383 pixels away
[Fri May 17 22:22:20 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:20 2013] Assessing source extent using major
[Fri May 17 22:22:20 2013] Source does appear to be extended
[Fri May 17 22:22:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:23:02 2013] XMMSAS src. selection expression = ellipse(30910.070862, 44070.323608, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 22:23:02 2013] Not overwriting source region fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_src.reg
[Fri May 17 22:23:02 2013] Extracting stamp from image fullrun_pn_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (318, 470) - (393, 545)
[Fri May 17 22:23:02 2013] XMMSAS bgd. selection expression = annulus(30910.070862, 44070.323608, 1087.500000, 2175.000000, X, Y) && !ellipse(31787.704071, 41850.727081, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 22:23:02 2013] Writing fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30.gif
[Fri May 17 22:23:09 2013] ../../xmm0044740201/products/events/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0044740201/products/events/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create
[Fri May 17 22:23:09 2013] Mean detx,y = (11094.28, -12792.42) 
[Fri May 17 22:23:09 2013] ../../xmm0044740201/products/images/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_src.img and ../../xmm0044740201/products/images/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create
[Fri May 17 22:23:09 2013] ../../xmm0044740201/products/spectra/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create
[Fri May 17 22:23:09 2013] Setting source spectrum file to fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri May 17 22:23:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri May 17 22:23:09 2013] ../../xmm0044740201/products/lightcurves/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create
[Fri May 17 23:09:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 23:09:32 2013] rmf not generated due to insufficient counts
[Fri May 17 23:24:57 2013] Updating aperture counts using extracted products
[Fri May 17 23:24:57 2013] Total counts from fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 302.00
[Fri May 17 23:24:57 2013] Total counts from fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_bgd.pi.gz = 774.00
[Fri May 17 23:24:57 2013] Got source and background scale factors 748126.000000, 4857086.000000
[Fri May 17 23:24:57 2013] User source parameters:
  Position = (355.8, 507.1) = 11 50 26.54 1 59 29.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 182.8 +/- 18.4
  Background aperture counts = 119.2
  Rate = 0.004 +/- 0.0004

[Fri May 17 23:24:57 2013] Updating counts from extracted products
[Fri May 17 23:24:57 2013] Set source signif. to 182.78/10.92 = 16.74
[Fri May 17 23:25:03 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:03 2013] Using photon index=1.80, rate=0.004, arf fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30.arf
[Fri May 17 23:25:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:03 2013] Updating source flux to 5.8e-14
[Fri May 17 23:25:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:25:37 2013] xmm0044740201/analysis//spectral/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete