[Fri May 17 22:20:25 2013] Detection parameters:
  Position = (360.6, 273.8) = 11 50 25.16 1 42 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 359.4 +/- 22.8
  Background counts = 37.9
  Rate = 0.01 +/- 0.0009

[Fri May 17 22:20:26 2013] Off-axis axis estimate = 4.85'
[Fri May 17 22:21:00 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:00 2013] Initial guess for spatial extent in simple fitting = 8.85"
[Fri May 17 22:21:00 2013] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.817
[Fri May 17 22:21:00 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 8.85"
[Fri May 17 22:21:01 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src24.ximg exists
[Fri May 17 22:21:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src24.csv
[Fri May 17 22:21:01 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri May 17 22:21:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src24.csv
[Fri May 17 22:21:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:02 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri May 17 22:21:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri May 17 22:21:02 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri May 17 22:21:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri May 17 22:21:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:23 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 10.930738 pixels away
[Fri May 17 22:21:23 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:23 2013] Assessing source extent using major
[Fri May 17 22:21:23 2013] Source does appear to be extended
[Fri May 17 22:21:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:21:55 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:55 2013] Initial guess for spatial extent in simple fitting = 8.85"
[Fri May 17 22:21:55 2013] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.817
[Fri May 17 22:21:55 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 8.85"
[Fri May 17 22:21:57 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src23.ximg exists
[Fri May 17 22:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src23.csv
[Fri May 17 22:21:57 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri May 17 22:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src23.csv
[Fri May 17 22:21:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:58 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri May 17 22:21:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 17 22:21:58 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri May 17 22:21:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 17 22:21:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:20 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 13.688746 pixels away
[Fri May 17 22:22:20 2013] Source 24 is offset by 1.462063 and -0.192806 pixels which is larger than
2 X fitted extent = 1.285913 x 3.042915, not incorporating fit results
[Fri May 17 22:22:20 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:20 2013] Assessing source extent using major
[Fri May 17 22:22:20 2013] Source does appear to be extended
[Fri May 17 22:22:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:23:02 2013] XMMSAS src. selection expression = ellipse(31326.225464, 23772.029907, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 22:23:02 2013] Not overwriting source region fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_src.reg
[Fri May 17 22:23:02 2013] Extracting stamp from image fullrun_pn_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (323, 236) - (398, 311)
[Fri May 17 22:23:02 2013] XMMSAS bgd. selection expression = annulus(31326.225464, 23772.029907, 1087.500000, 2175.000000, X, Y) && !ellipse(30626.264160, 23478.232330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28794.142800, 23005.083400, 506.900455, 506.900455, 0.000000, X, Y)
[Fri May 17 22:23:02 2013] Writing fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24.gif
[Fri May 17 22:23:07 2013] ../../xmm0044740201/products/events/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_src.evt and ../../xmm0044740201/products/events/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_bgd.evt exist, delete to re-create
[Fri May 17 22:23:07 2013] Mean detx,y = (2832.30, 5678.87) 
[Fri May 17 22:23:07 2013] ../../xmm0044740201/products/images/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_src.img and ../../xmm0044740201/products/images/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_bgd.img exist, delete to re-create
[Fri May 17 22:23:07 2013] ../../xmm0044740201/products/spectra/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_bgd.pi exist, delete to re-create
[Fri May 17 22:23:07 2013] Setting source spectrum file to fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri May 17 22:23:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri May 17 22:23:07 2013] ../../xmm0044740201/products/lightcurves/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_bgd.lc exist, delete to re-create
[Fri May 17 23:05:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 23:05:31 2013] rmf not generated due to insufficient counts
[Fri May 17 23:24:56 2013] Updating aperture counts using extracted products
[Fri May 17 23:24:56 2013] Total counts from fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 493.00
[Fri May 17 23:24:56 2013] Total counts from fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_bgd.pi.gz = 1619.00
[Fri May 17 23:24:56 2013] Got source and background scale factors 1015364.000000, 8901804.000000
[Fri May 17 23:24:56 2013] User source parameters:
  Position = (360.6, 273.8) = 11 50 25.16 1 42 32.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 308.3 +/- 23.2
  Background aperture counts = 184.7
  Rate = 0.007 +/- 0.0005

[Fri May 17 23:24:56 2013] Updating counts from extracted products
[Fri May 17 23:24:56 2013] Set source signif. to 308.33/13.59 = 22.69
[Fri May 17 23:25:03 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:03 2013] Using photon index=1.80, rate=0.00674, arf fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24.arf
[Fri May 17 23:25:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:03 2013] Updating source flux to 5.5e-14
[Fri May 17 23:25:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:25:37 2013] xmm0044740201/analysis//spectral/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete