[Fri May 17 22:20:24 2013] Detection parameters:
  Position = (193.4, 325.8) = 11 51 13.68 1 46 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 400.6 +/- 24.6
  Background counts = 30.8
  Rate = 0.009 +/- 0.0005

[Fri May 17 22:20:26 2013] Off-axis axis estimate = 7.87'
[Fri May 17 22:21:00 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:00 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Fri May 17 22:21:00 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.083
[Fri May 17 22:21:00 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 10.36"
[Fri May 17 22:21:01 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src17.ximg exists
[Fri May 17 22:21:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src17.csv
[Fri May 17 22:21:01 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri May 17 22:21:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src17.csv
[Fri May 17 22:21:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:02 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri May 17 22:21:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri May 17 22:21:02 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri May 17 22:21:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri May 17 22:21:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:23 2013] Spatial fit model total counts = 757.548000, observed total counts = 667.000000
[Fri May 17 22:21:23 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 22:21:23 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:23 2013] Assessing source extent using major
[Fri May 17 22:21:23 2013] Source does appear to be extended
[Fri May 17 22:21:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:21:55 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:55 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Fri May 17 22:21:55 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.083
[Fri May 17 22:21:55 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 10.36"
[Fri May 17 22:21:57 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src16.ximg exists
[Fri May 17 22:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src16.csv
[Fri May 17 22:21:57 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri May 17 22:21:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src16.csv
[Fri May 17 22:21:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:58 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri May 17 22:21:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri May 17 22:21:58 2013] fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri May 17 22:21:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri May 17 22:21:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:20 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.083331 pixels away
[Fri May 17 22:22:20 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:20 2013] Assessing source extent using major
[Fri May 17 22:22:20 2013] Source does appear to be extended
[Fri May 17 22:22:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:23:02 2013] XMMSAS src. selection expression = ellipse(16775.378555, 28297.747711, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 22:23:02 2013] Not overwriting source region fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_src.reg
[Fri May 17 22:23:02 2013] Extracting stamp from image fullrun_pn_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (156, 288) - (231, 363)
[Fri May 17 22:23:02 2013] XMMSAS bgd. selection expression = annulus(16775.378555, 28297.747711, 1087.500000, 2175.000000, X, Y) && !ellipse(14179.902893, 26570.422821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15480.661484, 29556.059021, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 22:23:02 2013] Writing fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17.gif
[Fri May 17 22:23:06 2013] ../../xmm0044740201/products/events/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0044740201/products/events/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Fri May 17 22:23:06 2013] Mean detx,y = (-8380.77, -4582.29) 
[Fri May 17 22:23:06 2013] ../../xmm0044740201/products/images/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_src.img and ../../xmm0044740201/products/images/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Fri May 17 22:23:06 2013] ../../xmm0044740201/products/spectra/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Fri May 17 22:23:06 2013] Setting source spectrum file to fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri May 17 22:23:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri May 17 22:23:06 2013] ../../xmm0044740201/products/lightcurves/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Fri May 17 23:04:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 23:04:01 2013] rmf not generated due to insufficient counts
[Fri May 17 23:24:55 2013] Updating aperture counts using extracted products
[Fri May 17 23:24:55 2013] Total counts from fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 558.00
[Fri May 17 23:24:55 2013] Total counts from fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_bgd.pi.gz = 1346.00
[Fri May 17 23:24:55 2013] Got source and background scale factors 1106239.000000, 8384648.000000
[Fri May 17 23:24:55 2013] User source parameters:
  Position = (193.4, 325.8) = 11 51 13.68 1 46 16.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 380.4 +/- 24.6
  Background aperture counts = 177.6
  Rate = 0.008 +/- 0.0005

[Fri May 17 23:24:55 2013] Updating counts from extracted products
[Fri May 17 23:24:55 2013] Set source signif. to 380.41/13.33 = 28.55
[Fri May 17 23:25:03 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:03 2013] Using photon index=1.80, rate=0.00832, arf fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17.arf
[Fri May 17 23:25:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:03 2013] Updating source flux to 5.5e-14
[Fri May 17 23:25:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:25:37 2013] xmm0044740201/analysis//spectral/fullrun_pn_xmm0044740201_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete