[Fri May 17 22:20:29 2013] Detection parameters:
  Position = (309.3, 420.5) = 11 50 40.05 1 53 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.4 +/- 9.9
  Background counts = 11.7
  Rate = 0.002 +/- 0.0004

[Fri May 17 22:20:30 2013] Off-axis axis estimate = 8.89'
[Fri May 17 22:21:06 2013] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:06 2013] Initial guess for spatial extent in simple fitting = 10.87"
[Fri May 17 22:21:06 2013] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.945
[Fri May 17 22:21:06 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 10.87"
[Fri May 17 22:21:07 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src24.ximg exists
[Fri May 17 22:21:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src24.csv
[Fri May 17 22:21:07 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri May 17 22:21:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src24.csv
[Fri May 17 22:21:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:07 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri May 17 22:21:07 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri May 17 22:21:07 2013] Fit fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Fri May 17 22:21:40 2013] Spatial fit model total counts = 161.110000, observed total counts = 155.000000
[Fri May 17 22:21:40 2013] Offset between fit and detection position for source 33 = 0.340114 pixels
[Fri May 17 22:21:40 2013] 161.788300 total counts/ 129.514000 bgd. counts: snr = 2.835949
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.340114 pixels
  Position = (308.9, 420.5) = 11 50 40.15 1 53 8.9
  Extent = 4.4 (2.8-7.2)", rotation angle = 0
  Source counts = 32.3 +/- 12.7
  Background counts = 129.5
  Rate = 0.0007 +/- 0.0003
[Fri May 17 22:21:40 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:40 2013] Assessing source extent using major axis lower bound
[Fri May 17 22:21:40 2013] Source does appear to be extended
[Fri May 17 22:21:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:22:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 22:22:01 2013] Initial guess for spatial extent in simple fitting = 4.36"
[Fri May 17 22:22:01 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.998
[Fri May 17 22:22:01 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 4.36"
[Fri May 17 22:22:02 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src23.ximg exists
[Fri May 17 22:22:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src23.csv
[Fri May 17 22:22:02 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri May 17 22:22:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src23.csv
[Fri May 17 22:22:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:02 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri May 17 22:22:02 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri May 17 22:22:02 2013] Fit fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri May 17 22:22:42 2013] Spatial fit model total counts = 156.966000, observed total counts = 153.000000
[Fri May 17 22:22:42 2013] Offset between fit and detection position for source 33 = 0.019132 pixels
[Fri May 17 22:22:42 2013] 156.793600 total counts/ 123.719000 bgd. counts: snr = 2.973558
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.019132 pixels
  Position = (309.0, 420.5) = 11 50 40.15 1 53 8.8
  Extent = 4.5 (2.9-7.5)", rotation angle = 0
  Source counts = 33.1 +/- 12.5
  Background counts = 123.7
  Rate = 0.0007 +/- 0.0003
[Fri May 17 22:22:42 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:42 2013] Assessing source extent using major axis lower bound
[Fri May 17 22:22:42 2013] Source does appear to be extended
[Fri May 17 22:22:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 23:23:54 2013] XMMSAS src. selection expression = ellipse(26831.224600, 36538.089200, 268.579808, 268.579808, 0.000000, X, Y)
[Fri May 17 23:23:54 2013] Not overwriting source region fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_src.reg
[Fri May 17 23:23:54 2013] Extracting stamp from image fullrun_mos2_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (294, 405) - (324, 436)
[Fri May 17 23:23:54 2013] XMMSAS bgd. selection expression = annulus(26831.224600, 36538.089200, 447.633013, 895.266026, X, Y)
[Fri May 17 23:23:54 2013] Writing fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33.gif
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/events/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0044740201/products/events/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create
[Fri May 17 23:23:56 2013] Mean detx,y = (-4074.26, 7626.40) 
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/images/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_src.img and ../../xmm0044740201/products/images/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/spectra/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create
[Fri May 17 23:23:56 2013] Setting source spectrum file to fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri May 17 23:23:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/lightcurves/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create
[Fri May 17 23:24:01 2013] Not generating rmf since there are only 33 counts
[Fri May 17 23:24:01 2013] rmf not generated due to insufficient counts
[Fri May 17 23:24:01 2013] fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33.arf exists, delete to re-create
[Fri May 17 23:25:14 2013] Updating aperture counts using extracted products
[Fri May 17 23:25:14 2013] Total counts from fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 47.00
[Fri May 17 23:25:14 2013] Total counts from fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_bgd.pi.gz = 116.00
[Fri May 17 23:25:14 2013] Got source and background scale factors 230400.000000, 1743056.000000
[Fri May 17 23:25:14 2013] User source parameters:
  Position = (309.0, 420.5) = 11 50 40.15 1 53 8.8
  Extent = 4.5 (2.9-7.5)", rotation angle = 0
  Source aperture counts = 31.7 +/- 7.9
  Background aperture counts = 15.3
  Rate = 0.0007 +/- 0.0002

[Fri May 17 23:25:18 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:18 2013] Using photon index=1.80, rate=0.000686, arf fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33.arf
[Fri May 17 23:25:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:18 2013] Updating source flux to 2e-14
[Fri May 17 23:25:27 2013] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 17 23:25:31 2013] xmm0044740201/analysis//spectral/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete