[Fri May 17 22:20:29 2013] Detection parameters:
  Position = (356.2, 507.1) = 11 50 26.45 1 59 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.4 +/- 12.8
  Background counts = 9.0
  Rate = 0.003 +/- 0.0003

[Fri May 17 22:20:30 2013] Off-axis axis estimate = 15.70'
[Fri May 17 22:21:06 2013] Using EEF radius (= 14.28 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 22:21:06 2013] Initial guess for spatial extent in simple fitting = 14.28"
[Fri May 17 22:21:06 2013] source mask rpix=3.3, npix_max = 57, mask sum = 51, frac = 0.891
[Fri May 17 22:21:06 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 14.28"
[Fri May 17 22:21:07 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src18.ximg exists
[Fri May 17 22:21:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src18.csv
[Fri May 17 22:21:07 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri May 17 22:21:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src18.csv
[Fri May 17 22:21:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:07 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri May 17 22:21:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri May 17 22:21:07 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri May 17 22:21:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri May 17 22:21:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:40 2013] Spatial fit model total counts = 389.047000, observed total counts = 201.000000
[Fri May 17 22:21:40 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 22:21:40 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:40 2013] Assessing source extent using major
[Fri May 17 22:21:40 2013] Source does appear to be extended
[Fri May 17 22:21:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:22:01 2013] Using EEF radius (= 14.28 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:22:01 2013] Initial guess for spatial extent in simple fitting = 14.28"
[Fri May 17 22:22:01 2013] source mask rpix=3.3, npix_max = 57, mask sum = 51, frac = 0.891
[Fri May 17 22:22:01 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 14.28"
[Fri May 17 22:22:01 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src18.ximg exists
[Fri May 17 22:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src18.csv
[Fri May 17 22:22:01 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri May 17 22:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src18.csv
[Fri May 17 22:22:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:02 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri May 17 22:22:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri May 17 22:22:02 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri May 17 22:22:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri May 17 22:22:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:42 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 15.034089 pixels away
[Fri May 17 22:22:42 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:42 2013] Assessing source extent using major
[Fri May 17 22:22:42 2013] Source does appear to be extended
[Fri May 17 22:22:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 23:23:54 2013] XMMSAS src. selection expression = ellipse(30937.322083, 44068.613770, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 23:23:54 2013] Not overwriting source region fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_src.reg
[Fri May 17 23:23:54 2013] Extracting stamp from image fullrun_mos2_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (319, 470) - (394, 545)
[Fri May 17 23:23:54 2013] XMMSAS bgd. selection expression = annulus(30937.322083, 44068.613770, 1087.500000, 2175.000000, X, Y) && !ellipse(31436.942841, 41335.072601, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 23:23:54 2013] Writing fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31.gif
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/events/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0044740201/products/events/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Fri May 17 23:23:56 2013] Mean detx,y = (-10895.52, 12718.99) 
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/images/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_src.img and ../../xmm0044740201/products/images/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/spectra/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Fri May 17 23:23:56 2013] Setting source spectrum file to fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri May 17 23:23:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/lightcurves/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Fri May 17 23:24:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 23:24:01 2013] rmf not generated due to insufficient counts
[Fri May 17 23:24:01 2013] fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31.arf exists, delete to re-create
[Fri May 17 23:25:13 2013] Updating aperture counts using extracted products
[Fri May 17 23:25:13 2013] Total counts from fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 153.00
[Fri May 17 23:25:13 2013] Total counts from fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_bgd.pi.gz = 325.00
[Fri May 17 23:25:13 2013] Got source and background scale factors 817298.000000, 5182382.000000
[Fri May 17 23:25:13 2013] User source parameters:
  Position = (356.2, 507.1) = 11 50 26.45 1 59 30.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 101.7 +/- 13.4
  Background aperture counts = 51.3
  Rate = 0.002 +/- 0.0003

[Fri May 17 23:25:13 2013] Updating counts from extracted products
[Fri May 17 23:25:13 2013] Set source signif. to 101.75/7.16 = 14.21
[Fri May 17 23:25:18 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:18 2013] Using photon index=1.80, rate=0.00211, arf fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31.arf
[Fri May 17 23:25:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:18 2013] Updating source flux to 1.2e-13
[Fri May 17 23:25:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:25:31 2013] xmm0044740201/analysis//spectral/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete