[Fri May 17 22:20:28 2013] Detection parameters:
  Position = (280.8, 274.1) = 11 50 48.33 1 42 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 572.3 +/- 29.4
  Background counts = 11.2
  Rate = 0.01 +/- 0.0007

[Fri May 17 22:20:30 2013] Off-axis axis estimate = 2.18'
[Fri May 17 22:21:06 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:06 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Fri May 17 22:21:06 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.805
[Fri May 17 22:21:06 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.52"
[Fri May 17 22:21:06 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 17 22:21:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src2.csv
[Fri May 17 22:21:06 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 17 22:21:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src2.csv
[Fri May 17 22:21:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:07 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 17 22:21:07 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 17 22:21:07 2013] Fit fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri May 17 22:21:40 2013] Spatial fit model total counts = 591.999000, observed total counts = 592.000000
[Fri May 17 22:21:40 2013] Offset between fit and detection position for source 3 = 0.075441 pixels
[Fri May 17 22:21:40 2013] 598.579000 total counts/ 210.157000 bgd. counts: snr = 26.793651
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.075441 pixels
  Position = (280.7, 274.2) = 11 50 48.34 1 42 32.1
  Extent = 5.1 (4.6-5.5)", rotation angle = 0
  Source counts = 388.4 +/- 24.5
  Background counts = 210.2
  Rate = 0.008 +/- 0.0005
[Fri May 17 22:21:40 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:40 2013] Assessing source extent using major axis lower bound
[Fri May 17 22:21:40 2013] Source does appear to be extended
[Fri May 17 22:21:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:22:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 22:22:01 2013] Initial guess for spatial extent in simple fitting = 5.11"
[Fri May 17 22:22:01 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.069
[Fri May 17 22:22:01 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 5.11"
[Fri May 17 22:22:01 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 17 22:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src2.csv
[Fri May 17 22:22:01 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 17 22:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src2.csv
[Fri May 17 22:22:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:02 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 17 22:22:02 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 17 22:22:02 2013] Fit fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri May 17 22:22:42 2013] Spatial fit model total counts = 593.999000, observed total counts = 594.000000
[Fri May 17 22:22:42 2013] Offset between fit and detection position for source 3 = 0.013408 pixels
[Fri May 17 22:22:42 2013] 596.829000 total counts/ 204.703000 bgd. counts: snr = 27.407128
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.013408 pixels
  Position = (280.7, 274.2) = 11 50 48.34 1 42 32.1
  Extent = 5.2 (4.7-5.6)", rotation angle = 0
  Source counts = 392.1 +/- 24.4
  Background counts = 204.7
  Rate = 0.008 +/- 0.0005
[Fri May 17 22:22:42 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:42 2013] Assessing source extent using major axis lower bound
[Fri May 17 22:22:42 2013] Source does appear to be extended
[Fri May 17 22:22:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 23:23:54 2013] XMMSAS src. selection expression = ellipse(24375.473800, 23802.792200, 310.345209, 310.345209, 0.000000, X, Y)
[Fri May 17 23:23:54 2013] Not overwriting source region fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_src.reg
[Fri May 17 23:23:54 2013] Extracting stamp from image fullrun_mos2_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (263, 256) - (299, 292)
[Fri May 17 23:23:54 2013] XMMSAS bgd. selection expression = annulus(24375.473800, 23802.792200, 517.242015, 1034.484030, X, Y)
[Fri May 17 23:23:54 2013] Writing fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3.gif
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/events/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0044740201/products/events/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri May 17 23:23:56 2013] Mean detx,y = (3473.93, -2906.76) 
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/images/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_src.img and ../../xmm0044740201/products/images/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/spectra/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri May 17 23:23:56 2013] Setting source spectrum file to fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 17 23:23:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/lightcurves/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri May 17 23:24:01 2013] fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3.rmf exists, delete to re-create
[Fri May 17 23:24:01 2013] fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Fri May 17 23:25:11 2013] Updating aperture counts using extracted products
[Fri May 17 23:25:11 2013] Total counts from fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 421.00
[Fri May 17 23:25:11 2013] Total counts from fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 163.00
[Fri May 17 23:25:11 2013] Got source and background scale factors 299644.000000, 2519180.000000
[Fri May 17 23:25:11 2013] User source parameters:
  Position = (280.7, 274.2) = 11 50 48.34 1 42 32.1
  Extent = 5.2 (4.7-5.6)", rotation angle = 0
  Source aperture counts = 401.6 +/- 21.5
  Background aperture counts = 19.4
  Rate = 0.008 +/- 0.0004

[Fri May 17 23:25:18 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:18 2013] Using photon index=1.80, rate=0.00813, arf fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3.arf
[Fri May 17 23:25:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:18 2013] Updating source flux to 1.2e-13
[Fri May 17 23:25:31 2013] xmm0044740201/analysis//spectral/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete