[Fri May 17 22:20:29 2013] Detection parameters:
  Position = (193.3, 325.2) = 11 51 13.70 1 46 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.9 +/- 13.7
  Background counts = 10.7
  Rate = 0.005 +/- 0.0005

[Fri May 17 22:20:30 2013] Off-axis axis estimate = 7.87'
[Fri May 17 22:21:06 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:06 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Fri May 17 22:21:06 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Fri May 17 22:21:06 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 10.36"
[Fri May 17 22:21:06 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src8.ximg exists
[Fri May 17 22:21:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src8.csv
[Fri May 17 22:21:06 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri May 17 22:21:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src8.csv
[Fri May 17 22:21:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:07 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri May 17 22:21:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri May 17 22:21:07 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri May 17 22:21:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri May 17 22:21:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:40 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.143679 pixels away
[Fri May 17 22:21:40 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:40 2013] Assessing source extent using major
[Fri May 17 22:21:40 2013] Source does appear to be extended
[Fri May 17 22:21:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:22:01 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:22:01 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Fri May 17 22:22:01 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Fri May 17 22:22:01 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 10.36"
[Fri May 17 22:22:01 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src8.ximg exists
[Fri May 17 22:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src8.csv
[Fri May 17 22:22:01 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri May 17 22:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src8.csv
[Fri May 17 22:22:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:02 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri May 17 22:22:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri May 17 22:22:02 2013] fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri May 17 22:22:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri May 17 22:22:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:42 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.849442 pixels away
[Fri May 17 22:22:42 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:42 2013] Assessing source extent using major
[Fri May 17 22:22:42 2013] Source does appear to be extended
[Fri May 17 22:22:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 23:23:54 2013] XMMSAS src. selection expression = ellipse(16768.508667, 28244.001953, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 23:23:54 2013] Not overwriting source region fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_src.reg
[Fri May 17 23:23:54 2013] Extracting stamp from image fullrun_mos2_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (156, 288) - (231, 363)
[Fri May 17 23:23:54 2013] XMMSAS bgd. selection expression = annulus(16768.508667, 28244.001953, 1087.500000, 2175.000000, X, Y) && !ellipse(14142.737793, 26567.029694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15438.003128, 29565.789703, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 23:23:54 2013] Writing fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16.gif
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/events/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0044740201/products/events/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Fri May 17 23:23:56 2013] Mean detx,y = (8562.52, 4298.56) 
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/images/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_src.img and ../../xmm0044740201/products/images/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/spectra/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Fri May 17 23:23:56 2013] Setting source spectrum file to fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri May 17 23:23:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri May 17 23:23:56 2013] ../../xmm0044740201/products/lightcurves/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Fri May 17 23:24:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 23:24:01 2013] rmf not generated due to insufficient counts
[Fri May 17 23:24:01 2013] fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16.arf exists, delete to re-create
[Fri May 17 23:25:12 2013] Updating aperture counts using extracted products
[Fri May 17 23:25:12 2013] Total counts from fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 177.00
[Fri May 17 23:25:12 2013] Total counts from fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_bgd.pi.gz = 452.00
[Fri May 17 23:25:12 2013] Got source and background scale factors 1241540.000000, 8290813.000000
[Fri May 17 23:25:12 2013] User source parameters:
  Position = (193.3, 325.2) = 11 51 13.70 1 46 15.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 109.3 +/- 14.3
  Background aperture counts = 67.7
  Rate = 0.002 +/- 0.0003

[Fri May 17 23:25:12 2013] Updating counts from extracted products
[Fri May 17 23:25:12 2013] Set source signif. to 109.31/8.23 = 13.29
[Fri May 17 23:25:18 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:18 2013] Using photon index=1.80, rate=0.00227, arf fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16.arf
[Fri May 17 23:25:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:18 2013] Updating source flux to 5.3e-14
[Fri May 17 23:25:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:25:31 2013] xmm0044740201/analysis//spectral/fullrun_mos2_xmm0044740201_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete