[Fri May 17 22:20:28 2013] Detection parameters:
  Position = (356.2, 506.9) = 11 50 26.42 1 59 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.2 +/- 10.8
  Background counts = 8.6
  Rate = 0.002 +/- 0.0002

[Fri May 17 22:20:28 2013] Off-axis axis estimate = 15.68'
[Fri May 17 22:21:03 2013] Using EEF radius (= 14.27 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 22:21:03 2013] Initial guess for spatial extent in simple fitting = 14.27"
[Fri May 17 22:21:03 2013] source mask rpix=3.3, npix_max = 57, mask sum = 51, frac = 0.892
[Fri May 17 22:21:03 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 14.27"
[Fri May 17 22:21:04 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src23.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src23.csv
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src23.csv
[Fri May 17 22:21:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri May 17 22:21:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:32 2013] Source 53 is offset by 1.498436 and 8.670564 pixels which is larger than
2 X fitted extent = 9.788782 x 4.264468, not incorporating fit results
[Fri May 17 22:21:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:32 2013] Assessing source extent using major
[Fri May 17 22:21:32 2013] Source does appear to be extended
[Fri May 17 22:21:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:21:58 2013] Using EEF radius (= 14.27 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:58 2013] Initial guess for spatial extent in simple fitting = 14.27"
[Fri May 17 22:21:58 2013] source mask rpix=3.3, npix_max = 57, mask sum = 51, frac = 0.892
[Fri May 17 22:21:58 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 14.27"
[Fri May 17 22:21:59 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src23.ximg exists
[Fri May 17 22:21:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src23.csv
[Fri May 17 22:21:59 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri May 17 22:21:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src23.csv
[Fri May 17 22:21:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri May 17 22:22:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri May 17 22:22:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 17 22:22:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:32 2013] Spatial fit model total counts = -717.153000, observed total counts = 150.000000
[Fri May 17 22:22:32 2013] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 22:22:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:32 2013] Assessing source extent using major
[Fri May 17 22:22:32 2013] Source does appear to be extended
[Fri May 17 22:22:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 23:23:47 2013] XMMSAS src. selection expression = ellipse(30944.668549, 44050.217072, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 23:23:47 2013] Not overwriting source region fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_src.reg
[Fri May 17 23:23:47 2013] Extracting stamp from image fullrun_mos1_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (319, 469) - (394, 544)
[Fri May 17 23:23:47 2013] XMMSAS bgd. selection expression = annulus(30944.668549, 44050.217072, 1087.500000, 2175.000000, X, Y) && !ellipse(31520.188000, 41331.636000, 545.958416, 545.958416, 0.000000, X, Y) && !ellipse(31762.505188, 41879.966919, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 23:23:47 2013] Writing fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53.gif
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_src.evt and ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_bgd.evt exist, delete to re-create
[Fri May 17 23:23:48 2013] Mean detx,y = (12807.30, 10786.38) 
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_src.img and ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_bgd.img exist, delete to re-create
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_bgd.pi exist, delete to re-create
[Fri May 17 23:23:48 2013] Setting source spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Fri May 17 23:23:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_bgd.lc exist, delete to re-create
[Fri May 17 23:23:54 2013] Not generating rmf since there are only 84 counts
[Fri May 17 23:23:54 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:54 2013] fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53.arf exists, delete to re-create
[Fri May 17 23:25:06 2013] Updating aperture counts using extracted products
[Fri May 17 23:25:06 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 115.00
[Fri May 17 23:25:06 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_bgd.pi.gz = 182.00
[Fri May 17 23:25:06 2013] Got source and background scale factors 742940.000000, 3795169.000000
[Fri May 17 23:25:06 2013] User source parameters:
  Position = (356.2, 506.9) = 11 50 26.42 1 59 26.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 79.4 +/- 11.8
  Background aperture counts = 35.6
  Rate = 0.002 +/- 0.0002

[Fri May 17 23:25:06 2013] Updating counts from extracted products
[Fri May 17 23:25:06 2013] Set source signif. to 79.37/5.97 = 13.30
[Fri May 17 23:25:10 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:10 2013] Using photon index=1.80, rate=0.00165, arf fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53.arf
[Fri May 17 23:25:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:10 2013] Updating source flux to 6.8e-14
[Fri May 17 23:25:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:25:27 2013] xmm0044740201/analysis//spectral/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete