[Fri May 17 22:20:28 2013] Detection parameters:
  Position = (407.8, 223.3) = 11 50 11.48 1 38 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.8 +/- 11.9
  Background counts = 10.3
  Rate = 0.001 +/- 0.0002

[Fri May 17 22:20:28 2013] Off-axis axis estimate = 9.62'
[Fri May 17 22:21:03 2013] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:03 2013] Initial guess for spatial extent in simple fitting = 11.24"
[Fri May 17 22:21:03 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.947
[Fri May 17 22:21:03 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 11.24"
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src27.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src27.csv
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src27.csv
[Fri May 17 22:21:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri May 17 22:21:05 2013] Fit fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri May 17 22:21:32 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 14.535532 pixels away
[Fri May 17 22:21:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:32 2013] Assessing source extent using major
[Fri May 17 22:21:32 2013] Source does appear to be extended
[Fri May 17 22:21:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:21:58 2013] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:58 2013] Initial guess for spatial extent in simple fitting = 11.24"
[Fri May 17 22:21:58 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.947
[Fri May 17 22:21:58 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 11.24"
[Fri May 17 22:21:59 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src27.ximg exists
[Fri May 17 22:21:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src27.csv
[Fri May 17 22:21:59 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri May 17 22:21:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src27.csv
[Fri May 17 22:21:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri May 17 22:22:00 2013] Fit fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri May 17 22:22:32 2013] Warning, spatial fit 27 centroid is now closest to src. 6
[Fri May 17 22:22:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:32 2013] Assessing source extent using major
[Fri May 17 22:22:32 2013] Source does appear to be extended
[Fri May 17 22:22:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 23:23:47 2013] XMMSAS src. selection expression = ellipse(35426.785461, 19374.701355, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 23:23:47 2013] Not overwriting source region fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_src.reg
[Fri May 17 23:23:47 2013] Extracting stamp from image fullrun_mos1_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (370, 186) - (445, 261)
[Fri May 17 23:23:47 2013] XMMSAS bgd. selection expression = annulus(35426.785461, 19374.701355, 1087.500000, 2175.000000, X, Y) && !ellipse(37387.147583, 20241.706482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34616.213800, 16944.312400, 327.637609, 327.637609, 0.000000, X, Y) && !ellipse(37761.461578, 17914.549408, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 23:23:47 2013] Writing fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51.gif
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_src.evt and ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_bgd.evt exist, delete to re-create
[Fri May 17 23:23:48 2013] Mean detx,y = (-11380.94, 4448.20) 
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_src.img and ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_bgd.img exist, delete to re-create
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_bgd.pi exist, delete to re-create
[Fri May 17 23:23:48 2013] Setting source spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Fri May 17 23:23:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_bgd.lc exist, delete to re-create
[Fri May 17 23:23:54 2013] Not generating rmf since there are only 68 counts
[Fri May 17 23:23:54 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:54 2013] fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51.arf exists, delete to re-create
[Fri May 17 23:25:07 2013] Updating aperture counts using extracted products
[Fri May 17 23:25:07 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_src_b10.pi.gz = 173.00
[Fri May 17 23:25:07 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_bgd.pi.gz = 611.00
[Fri May 17 23:25:07 2013] Got source and background scale factors 1240732.000000, 9447081.000000
[Fri May 17 23:25:07 2013] User source parameters:
  Position = (407.8, 223.3) = 11 50 11.48 1 38 53.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 92.8 +/- 14.2
  Background aperture counts = 80.2
  Rate = 0.002 +/- 0.0003

[Fri May 17 23:25:07 2013] Updating counts from extracted products
[Fri May 17 23:25:07 2013] Set source signif. to 92.75/8.96 = 10.35
[Fri May 17 23:25:10 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:10 2013] Using photon index=1.80, rate=0.00192, arf fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51.arf
[Fri May 17 23:25:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:10 2013] Updating source flux to 4.8e-14
[Fri May 17 23:25:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:25:27 2013] xmm0044740201/analysis//spectral/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete