[Fri May 17 22:20:27 2013] Detection parameters:
  Position = (280.8, 274.1) = 11 50 48.31 1 42 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 486.7 +/- 26.9
  Background counts = 10.3
  Rate = 0.01 +/- 0.0007

[Fri May 17 22:20:28 2013] Off-axis axis estimate = 2.18'
[Fri May 17 22:21:03 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:03 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Fri May 17 22:21:03 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.805
[Fri May 17 22:21:03 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.52"
[Fri May 17 22:21:04 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 17 22:21:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src3.csv
[Fri May 17 22:21:04 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 17 22:21:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src3.csv
[Fri May 17 22:21:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 17 22:21:05 2013] Fit fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri May 17 22:21:31 2013] Spatial fit model total counts = 530.268000, observed total counts = 532.000000
[Fri May 17 22:21:31 2013] Offset between fit and detection position for source 5 = 0.094048 pixels
[Fri May 17 22:21:31 2013] 529.517000 total counts/ 183.598000 bgd. counts: snr = 25.529390
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.094048 pixels
  Position = (280.9, 274.1) = 11 50 48.30 1 42 32.0
  Extent = 5.6 (5.1-6.3)", rotation angle = 0
  Source counts = 345.9 +/- 23.0
  Background counts = 183.6
  Rate = 0.007 +/- 0.0005
[Fri May 17 22:21:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:32 2013] Assessing source extent using major axis lower bound
[Fri May 17 22:21:32 2013] Source does appear to be extended
[Fri May 17 22:21:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:21:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:58 2013] Initial guess for spatial extent in simple fitting = 5.64"
[Fri May 17 22:21:58 2013] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.239
[Fri May 17 22:21:58 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 5.64"
[Fri May 17 22:21:59 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 17 22:21:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src3.csv
[Fri May 17 22:21:59 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 17 22:21:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src3.csv
[Fri May 17 22:21:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 17 22:22:00 2013] Fit fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri May 17 22:22:32 2013] Spatial fit model total counts = 532.000000, observed total counts = 532.000000
[Fri May 17 22:22:32 2013] Offset between fit and detection position for source 5 = 0.011558 pixels
[Fri May 17 22:22:32 2013] 531.426000 total counts/ 185.672000 bgd. counts: snr = 25.374296
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.011558 pixels
  Position = (280.9, 274.1) = 11 50 48.30 1 42 32.0
  Extent = 5.6 (5.1-6.3)", rotation angle = 0
  Source counts = 345.8 +/- 23.1
  Background counts = 185.7
  Rate = 0.007 +/- 0.0005
[Fri May 17 22:22:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:32 2013] Assessing source extent using major axis lower bound
[Fri May 17 22:22:32 2013] Source does appear to be extended
[Fri May 17 22:22:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 23:23:46 2013] XMMSAS src. selection expression = ellipse(24386.853000, 23800.676200, 334.560010, 334.560010, 0.000000, X, Y)
[Fri May 17 23:23:46 2013] Not overwriting source region fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_src.reg
[Fri May 17 23:23:46 2013] Extracting stamp from image fullrun_mos1_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (262, 255) - (300, 293)
[Fri May 17 23:23:46 2013] XMMSAS bgd. selection expression = annulus(24386.853000, 23800.676200, 557.600016, 1115.200032, X, Y)
[Fri May 17 23:23:46 2013] Writing fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5.gif
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri May 17 23:23:48 2013] Mean detx,y = (-2688.63, -3645.20) 
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_src.img and ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri May 17 23:23:48 2013] Setting source spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May 17 23:23:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri May 17 23:23:54 2013] fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5.rmf exists, delete to re-create
[Fri May 17 23:23:54 2013] fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Fri May 17 23:25:04 2013] Updating aperture counts using extracted products
[Fri May 17 23:25:04 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 380.00
[Fri May 17 23:25:04 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 205.00
[Fri May 17 23:25:04 2013] Got source and background scale factors 345600.000000, 2928444.000000
[Fri May 17 23:25:04 2013] User source parameters:
  Position = (280.9, 274.1) = 11 50 48.30 1 42 32.0
  Extent = 5.6 (5.1-6.3)", rotation angle = 0
  Source aperture counts = 355.8 +/- 20.5
  Background aperture counts = 24.2
  Rate = 0.007 +/- 0.0004

[Fri May 17 23:25:10 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:10 2013] Using photon index=1.80, rate=0.00717, arf fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5.arf
[Fri May 17 23:25:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:10 2013] Updating source flux to 1.3e-13
[Fri May 17 23:25:27 2013] xmm0044740201/analysis//spectral/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete