[Fri May 17 22:20:28 2013] Detection parameters:
  Position = (491.6, 273.0) = 11 49 47.16 1 42 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.4 +/- 9.1
  Background counts = 9.7
  Rate = 0.0009 +/- 0.0002

[Fri May 17 22:20:28 2013] Off-axis axis estimate = 14.13'
[Fri May 17 22:21:03 2013] Using EEF radius (= 13.49 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:03 2013] Initial guess for spatial extent in simple fitting = 13.49"
[Fri May 17 22:21:03 2013] source mask rpix=3.1, npix_max = 51, mask sum = 54, frac = 1.041
[Fri May 17 22:21:03 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 13.49"
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src44.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src44.csv
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src44_1.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src44.csv
[Fri May 17 22:21:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:06 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Fri May 17 22:21:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src44.csv
[Fri May 17 22:21:06 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Fri May 17 22:21:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src44.csv
[Fri May 17 22:21:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:32 2013] Warning, spatial fit 44 centroid is now closest to src. 46
[Fri May 17 22:21:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:32 2013] Assessing source extent using major
[Fri May 17 22:21:32 2013] Source does appear to be extended
[Fri May 17 22:21:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:21:58 2013] Using EEF radius (= 13.49 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:58 2013] Initial guess for spatial extent in simple fitting = 13.49"
[Fri May 17 22:21:58 2013] source mask rpix=3.1, npix_max = 51, mask sum = 54, frac = 1.041
[Fri May 17 22:21:58 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 13.49"
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src44.ximg exists
[Fri May 17 22:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src44.csv
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri May 17 22:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src44.csv
[Fri May 17 22:22:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri May 17 22:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri May 17 22:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri May 17 22:22:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:32 2013] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 17.970699 pixels away
[Fri May 17 22:22:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:32 2013] Assessing source extent using major
[Fri May 17 22:22:32 2013] Source does appear to be extended
[Fri May 17 22:22:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 23:23:47 2013] XMMSAS src. selection expression = ellipse(42720.647430, 23702.457520, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 23:23:47 2013] Not overwriting source region fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_src.reg
[Fri May 17 23:23:47 2013] Extracting stamp from image fullrun_mos1_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (454, 235) - (529, 310)
[Fri May 17 23:23:47 2013] XMMSAS bgd. selection expression = annulus(42720.647430, 23702.457520, 1087.500000, 2175.000000, X, Y)
[Fri May 17 23:23:47 2013] Writing fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45.gif
[Fri May 17 23:23:49 2013] ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_src.evt and ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_bgd.evt exist, delete to re-create
[Fri May 17 23:23:49 2013] Mean detx,y = (-10505.71, 12815.58) 
[Fri May 17 23:23:49 2013] ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_src.img and ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_bgd.img exist, delete to re-create
[Fri May 17 23:23:49 2013] ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_bgd.pi exist, delete to re-create
[Fri May 17 23:23:49 2013] Setting source spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Fri May 17 23:23:49 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Fri May 17 23:23:49 2013] ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_bgd.lc exist, delete to re-create
[Fri May 17 23:23:54 2013] Not generating rmf since there are only 44 counts
[Fri May 17 23:23:54 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:54 2013] fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45.arf exists, delete to re-create
[Fri May 17 23:25:09 2013] Updating aperture counts using extracted products
[Fri May 17 23:25:09 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 86.00
[Fri May 17 23:25:09 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_bgd.pi.gz = 285.00
[Fri May 17 23:25:09 2013] Got source and background scale factors 964506.000000, 5611286.000000
[Fri May 17 23:25:09 2013] User source parameters:
  Position = (491.6, 273.0) = 11 49 47.16 1 42 26.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 37.0 +/- 10.3
  Background aperture counts = 49.0
  Rate = 0.0008 +/- 0.0002

[Fri May 17 23:25:09 2013] Updating counts from extracted products
[Fri May 17 23:25:09 2013] Set source signif. to 37.01/7.00 = 5.29
[Fri May 17 23:25:11 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:11 2013] Using photon index=1.80, rate=0.000768, arf fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45.arf
[Fri May 17 23:25:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:11 2013] Updating source flux to 2.8e-14
[Fri May 17 23:25:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:25:27 2013] xmm0044740201/analysis//spectral/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete