[Fri May 17 22:20:28 2013] Detection parameters:
  Position = (360.7, 274.5) = 11 50 25.15 1 42 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.5 +/- 14.0
  Background counts = 9.9
  Rate = 0.004 +/- 0.0005

[Fri May 17 22:20:28 2013] Off-axis axis estimate = 4.83'
[Fri May 17 22:21:03 2013] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:03 2013] Initial guess for spatial extent in simple fitting = 8.84"
[Fri May 17 22:21:03 2013] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.584
[Fri May 17 22:21:03 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 8.84"
[Fri May 17 22:21:04 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src9.ximg exists
[Fri May 17 22:21:04 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri May 17 22:21:04 2013] Fit fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src9 appears to have run properly
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri May 17 22:21:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:31 2013] Spatial fit model total counts = 193.498000, observed total counts = 211.000000
[Fri May 17 22:21:31 2013] Offset between fit and detection position for source 42 = 0.134691 pixels
[Fri May 17 22:21:31 2013] 185.539700 total counts/ 118.844000 bgd. counts: snr = 6.117996
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.134691 pixels
  Position = (360.5, 274.6) = 11 50 25.18 1 42 33.9
  Extent = 9.3" x 6.0", rotation angle = 24
  Source counts = 66.7 +/- 13.6
  Background counts = 118.8
  Rate = 0.001 +/- 0.0003
[Fri May 17 22:21:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:32 2013] Assessing source extent using major
[Fri May 17 22:21:32 2013] Source does appear to be extended
[Fri May 17 22:21:32 2013] Computing asymmetry using major and minor axis, asym = 1.54
[Fri May 17 22:21:32 2013] Source is asymmetric
[Fri May 17 22:21:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:58 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Fri May 17 22:21:58 2013] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.732
[Fri May 17 22:21:58 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 7.67"
[Fri May 17 22:21:59 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src9.ximg exists
[Fri May 17 22:21:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src9.csv
[Fri May 17 22:21:59 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri May 17 22:21:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src9.csv
[Fri May 17 22:21:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri May 17 22:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri May 17 22:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri May 17 22:22:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:32 2013] Spatial fit model total counts = 189.561000, observed total counts = 211.000000
[Fri May 17 22:22:32 2013] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 22:22:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:32 2013] Assessing source extent using major
[Fri May 17 22:22:32 2013] Source does appear to be extended
[Fri May 17 22:22:32 2013] Computing asymmetry using major and minor axis, asym = 1.54
[Fri May 17 22:22:32 2013] Source is asymmetric
[Fri May 17 23:23:47 2013] XMMSAS src. selection expression = ellipse(31317.620477, 23840.201754, 558.270379, 361.837003, 23.806376, X, Y)
[Fri May 17 23:23:47 2013] Not overwriting source region fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_src.reg
[Fri May 17 23:23:47 2013] Extracting stamp from image fullrun_mos1_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (328, 242) - (393, 307)
[Fri May 17 23:23:47 2013] XMMSAS bgd. selection expression = annulus(31317.620477, 23840.201754, 930.450632, 1860.901265, X, Y)
[Fri May 17 23:23:47 2013] Writing fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42.gif
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_src.evt and ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_bgd.evt exist, delete to re-create
[Fri May 17 23:23:48 2013] Mean detx,y = (-5571.65, 2627.05) 
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_src.img and ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_bgd.img exist, delete to re-create
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_bgd.pi exist, delete to re-create
[Fri May 17 23:23:48 2013] Setting source spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Fri May 17 23:23:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_bgd.lc exist, delete to re-create
[Fri May 17 23:23:54 2013] Not generating rmf since there are only 66 counts
[Fri May 17 23:23:54 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:54 2013] fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42.arf exists, delete to re-create
[Fri May 17 23:25:04 2013] Updating aperture counts using extracted products
[Fri May 17 23:25:04 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 121.00
[Fri May 17 23:25:04 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_bgd.pi.gz = 445.00
[Fri May 17 23:25:05 2013] Got source and background scale factors 520868.000000, 7654023.000000
[Fri May 17 23:25:05 2013] User source parameters:
  Position = (360.5, 274.6) = 11 50 25.18 1 42 33.9
  Extent = 9.3" x 6.0", rotation angle = 24
  Source aperture counts = 90.7 +/- 12.0
  Background aperture counts = 30.3
  Rate = 0.002 +/- 0.0002

[Fri May 17 23:25:10 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:10 2013] Using photon index=1.80, rate=0.00138, arf fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42.arf
[Fri May 17 23:25:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:10 2013] Updating source flux to 2.5e-14
[Fri May 17 23:25:21 2013] Flag p found in src. 42 procflags, skipping spectral fitting
[Fri May 17 23:25:21 2013] Source 42 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 17 23:25:27 2013] xmm0044740201/analysis//spectral/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete