[Fri May 17 22:20:27 2013] Detection parameters:
  Position = (194.8, 381.7) = 11 51 13.28 1 50 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.3 +/- 10.1
  Background counts = 9.5
  Rate = 0.001 +/- 0.0002

[Fri May 17 22:20:28 2013] Off-axis axis estimate = 9.64'
[Fri May 17 22:21:03 2013] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:03 2013] Initial guess for spatial extent in simple fitting = 11.25"
[Fri May 17 22:21:03 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Fri May 17 22:21:03 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 11.25"
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src33.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src33.csv
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src33.csv
[Fri May 17 22:21:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:06 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri May 17 22:21:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri May 17 22:21:06 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri May 17 22:21:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri May 17 22:21:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:32 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.696074 pixels away
[Fri May 17 22:21:32 2013] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.522630 pixels away
[Fri May 17 22:21:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:32 2013] Assessing source extent using major
[Fri May 17 22:21:32 2013] Source does appear to be extended
[Fri May 17 22:21:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:21:58 2013] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:58 2013] Initial guess for spatial extent in simple fitting = 11.25"
[Fri May 17 22:21:58 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Fri May 17 22:21:58 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 11.25"
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src33.ximg exists
[Fri May 17 22:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src33.csv
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri May 17 22:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src33.csv
[Fri May 17 22:22:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri May 17 22:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri May 17 22:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri May 17 22:22:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:32 2013] Spatial fit model total counts = 154.133000, observed total counts = 136.000000
[Fri May 17 22:22:32 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 22:22:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:32 2013] Assessing source extent using major
[Fri May 17 22:22:32 2013] Source does appear to be extended
[Fri May 17 22:22:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 23:23:47 2013] XMMSAS src. selection expression = ellipse(16895.421722, 33161.044525, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 23:23:47 2013] Not overwriting source region fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_src.reg
[Fri May 17 23:23:47 2013] Extracting stamp from image fullrun_mos1_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (157, 344) - (232, 419)
[Fri May 17 23:23:47 2013] XMMSAS bgd. selection expression = annulus(16895.421722, 33161.044525, 1087.500000, 2175.000000, X, Y)
[Fri May 17 23:23:47 2013] Writing fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21.gif
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Fri May 17 23:23:48 2013] Mean detx,y = (8975.58, -6433.33) 
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_src.img and ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Fri May 17 23:23:48 2013] Setting source spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri May 17 23:23:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Fri May 17 23:23:54 2013] Not generating rmf since there are only 59 counts
[Fri May 17 23:23:54 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:54 2013] fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21.arf exists, delete to re-create
[Fri May 17 23:25:07 2013] Updating aperture counts using extracted products
[Fri May 17 23:25:08 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 111.00
[Fri May 17 23:25:08 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_bgd.pi.gz = 590.00
[Fri May 17 23:25:08 2013] Got source and background scale factors 1113162.000000, 10519924.000000
[Fri May 17 23:25:08 2013] User source parameters:
  Position = (194.8, 381.7) = 11 51 13.28 1 50 20.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 48.6 +/- 11.6
  Background aperture counts = 62.4
  Rate = 0.001 +/- 0.0002

[Fri May 17 23:25:08 2013] Updating counts from extracted products
[Fri May 17 23:25:08 2013] Set source signif. to 48.57/7.90 = 6.15
[Fri May 17 23:25:10 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:10 2013] Using photon index=1.80, rate=0.00101, arf fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21.arf
[Fri May 17 23:25:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:10 2013] Updating source flux to 2.4e-14
[Fri May 17 23:25:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:25:27 2013] xmm0044740201/analysis//spectral/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete