[Fri May 17 22:20:27 2013] Detection parameters:
  Position = (328.7, 451.9) = 11 50 34.42 1 55 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.9 +/- 11.1
  Background counts = 11.2
  Rate = 0.002 +/- 0.0002

[Fri May 17 22:20:28 2013] Off-axis axis estimate = 11.34'
[Fri May 17 22:21:03 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:03 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Fri May 17 22:21:03 2013] source mask rpix=2.8, npix_max = 43, mask sum = 24, frac = 0.557
[Fri May 17 22:21:03 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 12.10"
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src25.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src25.csv
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src25.csv
[Fri May 17 22:21:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri May 17 22:21:05 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri May 17 22:21:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri May 17 22:21:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:21:32 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.246679 pixels away
[Fri May 17 22:21:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:21:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:21:32 2013] Assessing source extent using major
[Fri May 17 22:21:32 2013] Source does appear to be extended
[Fri May 17 22:21:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:21:58 2013] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Fri May 17 22:21:58 2013] Initial guess for spatial extent in simple fitting = 12.10"
[Fri May 17 22:21:58 2013] source mask rpix=2.8, npix_max = 43, mask sum = 24, frac = 0.557
[Fri May 17 22:21:58 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 12.10"
[Fri May 17 22:21:59 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src25.ximg exists
[Fri May 17 22:21:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src25.csv
[Fri May 17 22:21:59 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri May 17 22:21:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src25.csv
[Fri May 17 22:21:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri May 17 22:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri May 17 22:22:00 2013] fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri May 17 22:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri May 17 22:22:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044740201_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 22:22:32 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 16.035456 pixels away
[Fri May 17 22:22:32 2013] Vigneting correction estimate = 1.000000
[Fri May 17 22:22:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 22:22:32 2013] Assessing source extent using major
[Fri May 17 22:22:32 2013] Source does appear to be extended
[Fri May 17 22:22:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 23:23:47 2013] XMMSAS src. selection expression = ellipse(28548.456818, 39265.588776, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 23:23:47 2013] Not overwriting source region fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_src.reg
[Fri May 17 23:23:47 2013] Extracting stamp from image fullrun_mos1_xmm0044740201_pi300-10000_cl_sm2.00.img.gz, (291, 414) - (366, 489)
[Fri May 17 23:23:47 2013] XMMSAS bgd. selection expression = annulus(28548.456818, 39265.588776, 1087.500000, 2175.000000, X, Y) && !ellipse(29885.664980, 38743.533880, 465.182413, 465.182413, 0.000000, X, Y) && !ellipse(26832.578230, 36564.698600, 758.366422, 507.030415, 22.475649, X, Y)
[Fri May 17 23:23:47 2013] Writing fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13.gif
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0044740201/products/events/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Fri May 17 23:23:48 2013] Mean detx,y = (9561.35, 6718.71) 
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_src.img and ../../xmm0044740201/products/images/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0044740201/products/spectra/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Fri May 17 23:23:48 2013] Setting source spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May 17 23:23:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri May 17 23:23:48 2013] ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0044740201/products/lightcurves/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Fri May 17 23:23:54 2013] Not generating rmf since there are only 78 counts
[Fri May 17 23:23:54 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:54 2013] fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13.arf exists, delete to re-create
[Fri May 17 23:25:06 2013] Updating aperture counts using extracted products
[Fri May 17 23:25:06 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 125.00
[Fri May 17 23:25:06 2013] Total counts from fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_bgd.pi.gz = 614.00
[Fri May 17 23:25:07 2013] Got source and background scale factors 974002.000000, 9669631.000000
[Fri May 17 23:25:07 2013] User source parameters:
  Position = (328.7, 451.9) = 11 50 34.42 1 55 25.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 63.2 +/- 12.2
  Background aperture counts = 61.8
  Rate = 0.001 +/- 0.0003

[Fri May 17 23:25:07 2013] Updating counts from extracted products
[Fri May 17 23:25:07 2013] Set source signif. to 63.15/7.86 = 8.03
[Fri May 17 23:25:10 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:25:10 2013] Using photon index=1.80, rate=0.00131, arf fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13.arf
[Fri May 17 23:25:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:25:10 2013] Updating source flux to 3.7e-14
[Fri May 17 23:25:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:25:27 2013] xmm0044740201/analysis//spectral/fullrun_mos1_xmm0044740201_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete