[Sat Jun 23 02:30:29 2012] Detection parameters:
  Position = (273.8, 452.3) = 18 5 37.88 2 39 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.8 +/- 8.0
  Background counts = 8.5
  Rate = 0.005 +/- 0.001

[Sat Jun 23 02:30:30 2012] Off-axis axis estimate = 11.30'
[Sat Jun 23 02:31:42 2012] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 02:31:42 2012] Initial guess for spatial extent in simple fitting = 12.08"
[Sat Jun 23 02:31:42 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.141
[Sat Jun 23 02:31:42 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.08"
[Sat Jun 23 03:12:23 2012] fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun 23 03:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_src3.csv
[Sat Jun 23 03:12:23 2012] fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun 23 03:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_src3.csv
[Sat Jun 23 03:12:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 03:12:23 2012] fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun 23 03:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun 23 03:12:23 2012] fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun 23 03:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun 23 03:12:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 03:35:14 2012] Spatial fit model total counts = 111.724000, observed total counts = 95.000000
[Sat Jun 23 03:35:14 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 23 03:35:15 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 03:35:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 03:35:15 2012] Assessing source extent using major
[Sat Jun 23 03:35:15 2012] Source does appear to be extended
[Sat Jun 23 03:35:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 03:35:15 2012] Deleting source due to low Poisson probability 0.9