[Sat Jun 23 02:30:29 2012] Detection parameters:
  Position = (320.2, 278.1) = 18 5 24.40 2 27 3.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.9 +/- 10.5
  Background counts = 14.3
  Rate = 0.008 +/- 0.002

[Sat Jun 23 02:30:30 2012] Off-axis axis estimate = 2.16'
[Sat Jun 23 02:31:42 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 02:31:42 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Sat Jun 23 02:31:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Sat Jun 23 02:31:42 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.51"
[Sat Jun 23 03:12:23 2012] fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jun 23 03:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_src9.csv
[Sat Jun 23 03:12:23 2012] fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jun 23 03:12:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_src9.csv
[Sat Jun 23 03:12:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 03:12:23 2012] fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jun 23 03:12:23 2012] fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jun 23 03:12:23 2012] Fit fullrun_pn_xmm0044740101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Jun 23 03:35:14 2012] Warning, spatial fit 9 centroid is now closest to src. 11
[Sat Jun 23 03:35:14 2012] Spatial fit model total counts = 231.990000, observed total counts = 231.000000
[Sat Jun 23 03:35:14 2012] Offset between fit and detection position for source 10 = 0.448619 pixels
[Sat Jun 23 03:35:14 2012] Warning, changing simple spatial fit ID from 9 to 10
[Sat Jun 23 03:35:14 2012] 233.330100 total counts/ 215.524000 bgd. counts: snr = 1.212889
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.448619 pixels
  Position = (320.5, 277.8) = 18 5 24.31 2 27 2.4
  Extent = 4.9 (2.5-9.3)", rotation angle = 0
  Source counts = 17.8 +/- 15.3
  Background counts = 215.5
  Rate = 0.003 +/- 0.002
  Deleting source due to low Poisson probability