[Sat Jun 23 02:31:03 2012] Detection parameters:
  Position = (360.6, 406.4) = 18 5 12.67 2 36 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20.6 +/- 6.1
  Background counts = 2.7
  Rate = 0.004 +/- 0.001

[Sat Jun 23 02:31:03 2012] Off-axis axis estimate = 9.04'
[Sat Jun 23 03:22:05 2012] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 03:22:05 2012] Initial guess for spatial extent in simple fitting = 10.95"
[Sat Jun 23 03:22:05 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.989
[Sat Jun 23 03:22:05 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.95"
[Sat Jun 23 03:35:09 2012] fullrun_mos2_xmm0044740101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 23 03:35:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0044740101_pi300-10000_cl_pass0_src5.csv
[Sat Jun 23 03:35:09 2012] fullrun_mos2_xmm0044740101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 23 03:35:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0044740101_pi300-10000_cl_pass0_src5.csv
[Sat Jun 23 03:35:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 03:35:09 2012] fullrun_mos2_xmm0044740101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 23 03:35:09 2012] fullrun_mos2_xmm0044740101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 23 03:35:09 2012] Fit fullrun_mos2_xmm0044740101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 23 03:35:17 2012] Spatial fit model total counts = 67.139000, observed total counts = 66.000000
[Sat Jun 23 03:35:17 2012] Offset between fit and detection position for source 6 = 1.614442 pixels
[Sat Jun 23 03:35:17 2012] 69.466200 total counts/ 41.607100 bgd. counts: snr = 4.319002
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.614442 pixels
  Position = (359.3, 405.4) = 18 5 13.04 2 36 17.8
  Extent = 10.8 (2.7-21.9)", rotation angle = 0
  Source counts = 27.9 +/- 8.3
  Background counts = 41.6
  Rate = 0.003 +/- 0.001
[Sat Jun 23 03:35:17 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 03:35:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 03:35:17 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 03:35:17 2012] Source does appear to be extended
[Sat Jun 23 03:35:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 03:58:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 03:58:31 2012] Initial guess for spatial extent in simple fitting = 10.83"
[Sat Jun 23 03:58:31 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.006
[Sat Jun 23 03:58:31 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.83"
[Sat Jun 23 04:11:11 2012] fullrun_mos2_xmm0044740101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 23 04:11:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740101_pi300-10000_cl_pass1_src5.csv
[Sat Jun 23 04:11:11 2012] fullrun_mos2_xmm0044740101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 23 04:11:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740101_pi300-10000_cl_pass1_src5.csv
[Sat Jun 23 04:11:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 04:11:11 2012] fullrun_mos2_xmm0044740101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 23 04:11:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 23 04:11:11 2012] fullrun_mos2_xmm0044740101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 23 04:11:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044740101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 23 04:11:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044740101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044740101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 04:11:16 2012] Warning, spatial fit 5 centroid is now closest to src. 1
[Sat Jun 23 04:11:16 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 04:11:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 04:11:16 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 04:11:16 2012] Source does appear to be extended
[Sat Jun 23 04:11:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 04:48:15 2012] XMMSAS src. selection expression = ellipse(31214.671400, 35225.320200, 650.022019, 650.022019, 0.000000, X, Y)
[Sat Jun 23 04:48:15 2012] Writing source region out to fullrun_mos2_xmm0044740101_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun 23 04:48:15 2012] Extracting stamp from image fullrun_mos2_xmm0044740101_pi300-10000_cl_sm2.00.img.gz, (322, 368) - (397, 443)
[Sat Jun 23 04:48:15 2012] XMMSAS bgd. selection expression = annulus(31214.671400, 35225.320200, 1083.370031, 2166.740062, X, Y) && !ellipse(32641.796600, 35418.950400, 683.808820, 683.808820, 0.000000, X, Y)
[Sat Jun 23 04:48:15 2012] Writing fullrun_mos2_xmm0044740101_pi300-10000_pass1_cl_src6.gif
[Sat Jun 23 04:52:06 2012] Mean detx,y = (-5146.32, 7088.47) 
[Sat Jun 23 04:52:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 04:52:19 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 04:52:19 2012] Setting source spectrum file to fullrun_mos2_xmm0044740101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 23 04:52:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0044740101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun 23 04:53:20 2012] Not generating rmf since there are only 27 counts
[Sat Jun 23 04:53:20 2012] rmf not generated due to insufficient counts
[Sat Jun 23 04:53:57 2012] Updating aperture counts using extracted products
[Sat Jun 23 04:53:57 2012] Error reading totcts from fullrun_mos2_xmm0044740101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 23 04:53:57 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 04:53:57 2012] Using photon index=1.80, rate=0.00321, arf fullrun_mos2_xmm0044740101_pi300-10000_pass1_cl_src6.arf
[Sat Jun 23 04:53:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 04:53:57 2012] Updating source flux to 6.7e-14
[Sat Jun 23 04:54:13 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 23 04:54:14 2012] xmm0044740101/analysis//spectral/fullrun_mos2_xmm0044740101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete