[Sun Jun 10 14:04:40 2012] Detection parameters:
  Position = (289.5, 391.1) = 20 7 59.02 -11 3 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.9 +/- 8.1
  Background counts = 5.4
  Rate = 0.004 +/- 0.0008

[Sun Jun 10 14:04:41 2012] Off-axis axis estimate = 6.75'
[Sun Jun 10 15:15:03 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 15:15:03 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Sun Jun 10 15:15:03 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.989
[Sun Jun 10 15:15:03 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.80"
[Sun Jun 10 15:51:39 2012] fullrun_mos2_xmm0044350501_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 10 15:51:39 2012] fullrun_mos2_xmm0044350501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 10 15:51:39 2012] Fit fullrun_mos2_xmm0044350501_pi300-10000_cl_pass0_src5 appears to have run properly
[Sun Jun 10 15:51:39 2012] fullrun_mos2_xmm0044350501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 10 15:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044350501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 10 15:51:39 2012] fullrun_mos2_xmm0044350501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 10 15:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044350501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 10 15:51:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044350501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044350501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 15:51:55 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.305100 pixels away
[Sun Jun 10 15:51:55 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 15:51:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 15:51:55 2012] Assessing source extent using major
[Sun Jun 10 15:51:55 2012] Source does appear to be extended
[Sun Jun 10 15:51:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 16:40:21 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 16:40:21 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Sun Jun 10 16:40:21 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.989
[Sun Jun 10 16:40:21 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.80"
[Sun Jun 10 16:58:44 2012] fullrun_mos2_xmm0044350501_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 10 16:58:44 2012] fullrun_mos2_xmm0044350501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 10 16:58:44 2012] Fit fullrun_mos2_xmm0044350501_pi300-10000_cl_pass1_src5 appears to have run properly
[Sun Jun 10 16:58:44 2012] fullrun_mos2_xmm0044350501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 10 16:58:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044350501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun 10 16:58:44 2012] fullrun_mos2_xmm0044350501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 10 16:58:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044350501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun 10 16:58:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044350501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044350501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 16:58:56 2012] Spatial fit model total counts = 109.067000, observed total counts = 120.000000
[Sun Jun 10 16:58:56 2012] Offset between fit and detection position for source 6 = 0.768894 pixels
[Sun Jun 10 16:58:56 2012] 110.683500 total counts/ 71.376300 bgd. counts: snr = 4.652593
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.768894 pixels
  Position = (290.2, 390.8) = 20 7 58.80 -11 3 4.2
  Extent = 7.0" x 7.0", rotation angle = 0
  Source counts = 39.3 +/- 10.5
  Background counts = 71.4
  Rate = 0.003 +/- 0.0007
[Sun Jun 10 16:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 16:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 16:58:56 2012] Assessing source extent using major
[Sun Jun 10 16:58:56 2012] Source does appear to be extended
[Sun Jun 10 16:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 17:35:09 2012] XMMSAS src. selection expression = ellipse(25201.716160, 33953.500400, 418.880412, 418.880412, 0.000000, X, Y)
[Sun Jun 10 17:35:09 2012] Writing source region out to fullrun_mos2_xmm0044350501_pi300-10000_pass1_cl_src6_src.reg
[Sun Jun 10 17:35:09 2012] Extracting stamp from image fullrun_mos2_xmm0044350501_pi300-10000_cl_sm2.00.img.gz, (266, 367) - (314, 415)
[Sun Jun 10 17:35:09 2012] XMMSAS bgd. selection expression = annulus(25201.716160, 33953.500400, 698.134020, 1396.268040, X, Y)
[Sun Jun 10 17:35:09 2012] Writing fullrun_mos2_xmm0044350501_pi300-10000_pass1_cl_src6.gif
[Sun Jun 10 17:36:26 2012] Mean detx,y = (3561.47, 6082.20) 
[Sun Jun 10 17:36:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 17:36:40 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 17:36:40 2012] Setting source spectrum file to fullrun_mos2_xmm0044350501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 10 17:36:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0044350501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jun 10 17:42:14 2012] Not generating rmf since there are only 39 counts
[Sun Jun 10 17:42:14 2012] rmf not generated due to insufficient counts
[Sun Jun 10 17:43:48 2012] Updating aperture counts using extracted products
[Sun Jun 10 17:43:48 2012] Error reading totcts from fullrun_mos2_xmm0044350501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 10 17:43:49 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 17:43:49 2012] Using photon index=1.80, rate=0.00268, arf fullrun_mos2_xmm0044350501_pi300-10000_pass1_cl_src6.arf
[Sun Jun 10 17:43:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 17:43:49 2012] Updating source flux to 5e-14
[Sun Jun 10 17:44:03 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting