[Sun Jun 10 14:04:14 2012] Detection parameters:
  Position = (388.2, 388.6) = 20 7 29.86 -11 3 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.6 +/- 8.4
  Background counts = 6.1
  Rate = 0.004 +/- 0.0009

[Sun Jun 10 14:04:14 2012] Off-axis axis estimate = 9.22'
[Sun Jun 10 14:50:08 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 14:50:08 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Sun Jun 10 14:50:08 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Sun Jun 10 14:50:08 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.04"
[Sun Jun 10 15:15:03 2012] fullrun_mos1_xmm0044350501_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 10 15:15:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0044350501_pi300-10000_cl_pass0_src5.csv
[Sun Jun 10 15:15:03 2012] fullrun_mos1_xmm0044350501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 10 15:15:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0044350501_pi300-10000_cl_pass0_src5.csv
[Sun Jun 10 15:15:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044350501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044350501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 15:15:03 2012] fullrun_mos1_xmm0044350501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 10 15:15:03 2012] fullrun_mos1_xmm0044350501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 10 15:15:03 2012] Fit fullrun_mos1_xmm0044350501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jun 10 15:51:49 2012] Spatial fit model total counts = 94.992300, observed total counts = 95.000000
[Sun Jun 10 15:51:49 2012] Offset between fit and detection position for source 7 = 0.129224 pixels
[Sun Jun 10 15:51:49 2012] 94.485500 total counts/ 62.534400 bgd. counts: snr = 4.040418
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.129224 pixels
  Position = (388.3, 388.5) = 20 7 29.82 -11 3 14.0
  Extent = 6.3 (4.0-10.8)", rotation angle = 0
  Source counts = 32.0 +/- 9.7
  Background counts = 62.5
  Rate = 0.002 +/- 0.0007
[Sun Jun 10 15:51:49 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 15:51:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 15:51:49 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 15:51:49 2012] Source does appear to be extended
[Sun Jun 10 15:51:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 16:25:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 16:25:07 2012] Initial guess for spatial extent in simple fitting = 6.35"
[Sun Jun 10 16:25:07 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.042
[Sun Jun 10 16:25:07 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.35"
[Sun Jun 10 16:40:20 2012] fullrun_mos1_xmm0044350501_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 10 16:40:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044350501_pi300-10000_cl_pass1_src5.csv
[Sun Jun 10 16:40:20 2012] fullrun_mos1_xmm0044350501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 10 16:40:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044350501_pi300-10000_cl_pass1_src5.csv
[Sun Jun 10 16:40:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044350501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044350501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 16:40:21 2012] fullrun_mos1_xmm0044350501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 10 16:40:21 2012] fullrun_mos1_xmm0044350501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 10 16:40:21 2012] Fit fullrun_mos1_xmm0044350501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun 10 16:58:53 2012] Spatial fit model total counts = 94.998200, observed total counts = 95.000000
[Sun Jun 10 16:58:53 2012] Offset between fit and detection position for source 7 = 0.023951 pixels
[Sun Jun 10 16:58:53 2012] 94.502600 total counts/ 61.628900 bgd. counts: snr = 4.187515
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.023951 pixels
  Position = (388.3, 388.5) = 20 7 29.83 -11 3 14.1
  Extent = 6.6 (4.0-10.9)", rotation angle = 0
  Source counts = 32.9 +/- 9.7
  Background counts = 61.6
  Rate = 0.002 +/- 0.0007
[Sun Jun 10 16:58:53 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 16:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 16:58:53 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 16:58:53 2012] Source does appear to be extended
[Sun Jun 10 16:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 17:25:40 2012] XMMSAS src. selection expression = ellipse(33733.757600, 33753.726600, 396.354611, 396.354611, 0.000000, X, Y)
[Sun Jun 10 17:25:40 2012] Writing source region out to fullrun_mos1_xmm0044350501_pi300-10000_pass1_cl_src7_src.reg
[Sun Jun 10 17:25:40 2012] Extracting stamp from image fullrun_mos1_xmm0044350501_pi300-10000_cl_sm2.00.img.gz, (366, 366) - (411, 411)
[Sun Jun 10 17:25:40 2012] XMMSAS bgd. selection expression = annulus(33733.757600, 33753.726600, 660.591019, 1321.182038, X, Y)
[Sun Jun 10 17:25:40 2012] Writing fullrun_mos1_xmm0044350501_pi300-10000_pass1_cl_src7.gif
[Sun Jun 10 17:26:45 2012] Mean detx,y = (7858.44, 4658.62) 
[Sun Jun 10 17:26:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 17:27:00 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 17:27:01 2012] Setting source spectrum file to fullrun_mos1_xmm0044350501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jun 10 17:27:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0044350501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jun 10 17:34:25 2012] Not generating rmf since there are only 32 counts
[Sun Jun 10 17:34:25 2012] rmf not generated due to insufficient counts
[Sun Jun 10 17:43:47 2012] Updating aperture counts using extracted products
[Sun Jun 10 17:43:47 2012] Error reading totcts from fullrun_mos1_xmm0044350501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jun 10 17:43:48 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 17:43:48 2012] Using photon index=1.80, rate=0.00225, arf fullrun_mos1_xmm0044350501_pi300-10000_pass1_cl_src7.arf
[Sun Jun 10 17:43:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 17:43:48 2012] Updating source flux to 3.5e-14
[Sun Jun 10 17:43:50 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting