[Sat May 11 01:31:30 2013] Detection parameters:
  Position = (243.1, 197.0) = 0 34 24.26 -21 33 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.0 +/- 10.4
  Background counts = 48.6
  Rate = 0.003 +/- 0.0005

[Sat May 11 01:31:30 2013] Off-axis axis estimate = 8.38'
[Sat May 11 01:33:35 2013] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sat May 11 01:33:35 2013] Initial guess for spatial extent in simple fitting = 10.62"
[Sat May 11 01:33:35 2013] source mask rpix=2.4, npix_max = 34, mask sum = 24, frac = 0.694
[Sat May 11 01:33:35 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 10.62"
[Sat May 11 02:00:53 2013] fullrun_pn_xmm0044350101_pi300-10000_cl_pass0_src17.ximg exists
[Sat May 11 02:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044350101_pi300-10000_cl_pass0_src17.csv
[Sat May 11 02:00:53 2013] fullrun_pn_xmm0044350101_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat May 11 02:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044350101_pi300-10000_cl_pass0_src17.csv
[Sat May 11 02:00:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044350101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044350101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 02:00:53 2013] fullrun_pn_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat May 11 02:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat May 11 02:00:53 2013] fullrun_pn_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat May 11 02:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat May 11 02:00:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 02:42:01 2013] Source 17 is offset by -8.072394 and -3.124821 pixels which is larger than
2 X fitted extent = 2.525127 x 2.525127, not incorporating fit results
[Sat May 11 02:42:01 2013] Vigneting correction estimate = 1.000000
[Sat May 11 02:42:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 02:42:01 2013] Assessing source extent using major
[Sat May 11 02:42:01 2013] Source does appear to be extended
[Sat May 11 02:42:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 02:42:13 2013] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sat May 11 02:42:13 2013] Initial guess for spatial extent in simple fitting = 10.62"
[Sat May 11 02:42:13 2013] source mask rpix=2.4, npix_max = 34, mask sum = 24, frac = 0.694
[Sat May 11 02:42:13 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 10.62"
[Sat May 11 03:06:11 2013] fullrun_pn_xmm0044350101_pi300-10000_cl_pass1_src17.ximg exists
[Sat May 11 03:06:11 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0044350101_pi300-10000_cl_pass1_src17.csv
[Sat May 11 03:06:11 2013] fullrun_pn_xmm0044350101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat May 11 03:06:11 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0044350101_pi300-10000_cl_pass1_src17.csv
[Sat May 11 03:06:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044350101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044350101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 03:06:11 2013] fullrun_pn_xmm0044350101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat May 11 03:06:11 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0044350101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat May 11 03:06:11 2013] fullrun_pn_xmm0044350101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat May 11 03:06:11 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0044350101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat May 11 03:06:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0044350101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0044350101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 03:50:34 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 16.262211 pixels away
[Sat May 11 03:50:34 2013] Source 17 is offset by 2.415399 and 3.707094 pixels which is larger than
2 X fitted extent = 2.600939 x 2.600939, not incorporating fit results
[Sat May 11 03:50:34 2013] Vigneting correction estimate = 1.000000
[Sat May 11 03:50:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 03:50:34 2013] Assessing source extent using major
[Sat May 11 03:50:34 2013] Source does appear to be extended
[Sat May 11 03:50:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 03:50:54 2013] XMMSAS src. selection expression = ellipse(21096.973724, 17086.577194, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 03:50:54 2013] Writing source region out to fullrun_pn_xmm0044350101_pi300-10000_pass1_cl_src17_src.reg
[Sat May 11 03:50:54 2013] Extracting stamp from image fullrun_pn_xmm0044350101_pi300-10000_cl_sm2.00.img.gz, (206, 159) - (281, 234)
[Sat May 11 03:50:54 2013] XMMSAS bgd. selection expression = annulus(21096.973724, 17086.577194, 1087.500000, 2175.000000, X, Y) && !ellipse(19308.239200, 16066.547200, 605.160017, 381.667211, 11.639100, X, Y) && !ellipse(18548.449600, 15531.011459, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 03:50:54 2013] Writing fullrun_pn_xmm0044350101_pi300-10000_pass1_cl_src17.gif
[Sat May 11 04:01:16 2013] Mean detx,y = (-1813.86, -8515.51) 
[Sat May 11 04:01:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 04:01:43 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 04:01:43 2013] Setting source spectrum file to fullrun_pn_xmm0044350101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat May 11 04:01:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0044350101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat May 11 04:10:54 2013] Not generating rmf since there are only 54 counts
[Sat May 11 04:10:54 2013] rmf not generated due to insufficient counts
[Sat May 11 04:35:01 2013] Updating aperture counts using extracted products
[Sat May 11 04:35:01 2013] Total counts from fullrun_pn_xmm0044350101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 100.00
[Sat May 11 04:35:01 2013] Total counts from fullrun_pn_xmm0044350101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 620.00
[Sat May 11 04:35:01 2013] Got source and background scale factors 905556.000000, 8683257.000000
[Sat May 11 04:35:01 2013] User source parameters:
  Position = (243.1, 197.0) = 0 34 24.26 -21 33 3.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 35.3 +/- 11.0
  Background aperture counts = 64.7
  Rate = 0.003 +/- 0.0009

[Sat May 11 04:35:01 2013] Updating counts from extracted products
[Sat May 11 04:35:01 2013] Set source signif. to 35.34/8.04 = 4.40
[Sat May 11 04:35:03 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 04:35:03 2013] Using photon index=1.80, rate=0.00273, arf fullrun_pn_xmm0044350101_pi300-10000_pass1_cl_src17.arf
[Sat May 11 04:35:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 04:35:03 2013] Updating source flux to 4.8e-14
[Sat May 11 04:35:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 04:35:13 2013] xmm0044350101/analysis//spectral/fullrun_pn_xmm0044350101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete