[Sat May 11 01:32:11 2013] Detection parameters:
  Position = (277.5, 289.5) = 0 34 13.50 -21 26 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1522.9 +/- 47.4
  Background counts = 17.9
  Rate = 0.08 +/- 0.002

[Sat May 11 01:32:12 2013] Off-axis axis estimate = 1.65'
[Sat May 11 02:20:21 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat May 11 02:20:21 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Sat May 11 02:20:21 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Sat May 11 02:20:21 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sat May 11 02:41:56 2013] fullrun_mos2_xmm0044350101_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 11 02:41:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044350101_pi300-10000_cl_pass0_src1.csv
[Sat May 11 02:41:56 2013] fullrun_mos2_xmm0044350101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 11 02:41:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044350101_pi300-10000_cl_pass0_src1.csv
[Sat May 11 02:41:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044350101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044350101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 02:41:57 2013] fullrun_mos2_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 11 02:41:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May 11 02:41:57 2013] fullrun_mos2_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 11 02:41:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May 11 02:41:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 02:42:06 2013] Source 1 is offset by 7.197674 and 6.209148 pixels which is larger than
2 X fitted extent = 0.833591 x 0.833591, not incorporating fit results
[Sat May 11 02:42:06 2013] Vigneting correction estimate = 1.000000
[Sat May 11 02:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 02:42:06 2013] Assessing source extent using major
[Sat May 11 02:42:06 2013] Source does appear to be extended
[Sat May 11 02:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 03:23:28 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat May 11 03:23:28 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Sat May 11 03:23:28 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Sat May 11 03:23:28 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.25"
[Sat May 11 03:50:27 2013] fullrun_mos2_xmm0044350101_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 11 03:50:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044350101_pi300-10000_cl_pass1_src1.csv
[Sat May 11 03:50:27 2013] fullrun_mos2_xmm0044350101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 11 03:50:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0044350101_pi300-10000_cl_pass1_src1.csv
[Sat May 11 03:50:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0044350101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0044350101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 03:50:27 2013] fullrun_mos2_xmm0044350101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 11 03:50:27 2013] fullrun_mos2_xmm0044350101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 11 03:50:27 2013] Fit fullrun_mos2_xmm0044350101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 11 03:50:43 2013] Spatial fit model total counts = 1494.050000, observed total counts = 1354.000000
[Sat May 11 03:50:43 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 03:50:43 2013] Vigneting correction estimate = 1.000000
[Sat May 11 03:50:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 03:50:43 2013] Assessing source extent using major
[Sat May 11 03:50:43 2013] Source does appear to be extended
[Sat May 11 03:50:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 04:20:38 2013] Counts = 1522.872192, rescaling region sizes by 2.000000
[Sat May 11 04:20:38 2013] XMMSAS src. selection expression = ellipse(24096.519623, 25141.517914, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May 11 04:20:38 2013] Writing source region out to fullrun_mos2_xmm0044350101_pi300-10000_pass1_cl_src1_src.reg
[Sat May 11 04:20:38 2013] Extracting stamp from image fullrun_mos2_xmm0044350101_pi300-10000_cl_sm2.00.img.gz, (203, 215) - (353, 365)
[Sat May 11 04:20:38 2013] XMMSAS bgd. selection expression = annulus(24096.519623, 25141.517914, 4350.000000, 8700.000000, X, Y) && !ellipse(24397.044382, 31635.754400, 460.981613, 296.628009, 2.364029, X, Y) && !ellipse(20190.944400, 32133.689400, 565.463216, 565.463216, 0.000000, X, Y) && !ellipse(19251.170807, 16126.981903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30659.701599, 34109.006805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15384.040800, 29411.874200, 307.301609, 307.301609, 0.000000, X, Y) && !ellipse(29237.960800, 22960.660600, 356.793610, 356.793610, 0.000000, X, Y) && !ellipse(25603.044760, 20940.171000, 277.924808, 277.924808, 0.000000, X, Y) && !ellipse(23240.896000, 27283.161000, 467.499213, 467.499213, 0.000000, X, Y)
[Sat May 11 04:20:38 2013] Writing fullrun_mos2_xmm0044350101_pi300-10000_pass1_cl_src1.gif
[Sat May 11 04:20:45 2013] Mean detx,y = (125.42, 35.92) 
[Sat May 11 04:20:47 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 04:24:45 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 04:24:46 2013] Setting source spectrum file to fullrun_mos2_xmm0044350101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 11 04:24:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0044350101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 11 04:29:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 04:29:02 2013] rmf not generated due to insufficient counts
[Sat May 11 04:35:05 2013] Updating aperture counts using extracted products
[Sat May 11 04:35:05 2013] Total counts from fullrun_mos2_xmm0044350101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1665.00
[Sat May 11 04:35:05 2013] Total counts from fullrun_mos2_xmm0044350101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 10104.00
[Sat May 11 04:35:05 2013] Got source and background scale factors 4836312.000000, 161773258.000000
[Sat May 11 04:35:05 2013] User source parameters:
  Position = (277.5, 289.5) = 0 34 13.50 -21 26 17.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1362.9 +/- 41.8
  Background aperture counts = 302.1
  Rate = 0.07 +/- 0.002

[Sat May 11 04:35:05 2013] Updating counts from extracted products
[Sat May 11 04:35:05 2013] Set source signif. to 1362.93/17.38 = 78.42
[Sat May 11 04:35:07 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 04:35:07 2013] Using photon index=1.80, rate=0.0657, arf fullrun_mos2_xmm0044350101_pi300-10000_pass1_cl_src1.arf
[Sat May 11 04:35:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 04:35:07 2013] Updating source flux to 6.7e-13
[Sat May 11 04:35:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 04:35:11 2013] xmm0044350101/analysis//spectral/fullrun_mos2_xmm0044350101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete