[Sat May 11 01:31:49 2013] Detection parameters:
  Position = (232.4, 370.7) = 0 34 27.56 -21 20 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.1 +/- 13.3
  Background counts = 17.7
  Rate = 0.006 +/- 0.0008

[Sat May 11 01:31:49 2013] Off-axis axis estimate = 7.10'
[Sat May 11 02:00:53 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Sat May 11 02:00:53 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Sat May 11 02:00:53 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.801
[Sat May 11 02:00:53 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 9.98"
[Sat May 11 02:20:21 2013] fullrun_mos1_xmm0044350101_pi300-10000_cl_pass0_src6.ximg exists
[Sat May 11 02:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044350101_pi300-10000_cl_pass0_src6.csv
[Sat May 11 02:20:21 2013] fullrun_mos1_xmm0044350101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat May 11 02:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044350101_pi300-10000_cl_pass0_src6.csv
[Sat May 11 02:20:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044350101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044350101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 02:20:21 2013] fullrun_mos1_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat May 11 02:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat May 11 02:20:21 2013] fullrun_mos1_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat May 11 02:20:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat May 11 02:20:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0044350101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 02:42:04 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.445954 pixels away
[Sat May 11 02:42:04 2013] Vigneting correction estimate = 1.000000
[Sat May 11 02:42:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 02:42:04 2013] Assessing source extent using major
[Sat May 11 02:42:04 2013] Source does appear to be extended
[Sat May 11 02:42:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 03:06:11 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Sat May 11 03:06:11 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Sat May 11 03:06:11 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.801
[Sat May 11 03:06:11 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.98"
[Sat May 11 03:23:28 2013] fullrun_mos1_xmm0044350101_pi300-10000_cl_pass1_src5.ximg exists
[Sat May 11 03:23:28 2013] fullrun_mos1_xmm0044350101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat May 11 03:23:28 2013] Fit fullrun_mos1_xmm0044350101_pi300-10000_cl_pass1_src5 appears to have run properly
[Sat May 11 03:23:28 2013] fullrun_mos1_xmm0044350101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat May 11 03:23:28 2013] fullrun_mos1_xmm0044350101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat May 11 03:23:28 2013] Fit fullrun_mos1_xmm0044350101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat May 11 03:50:39 2013] Spatial fit model total counts = 217.314000, observed total counts = 201.000000
[Sat May 11 03:50:39 2013] Offset between fit and detection position for source 4 = 0.015763 pixels
[Sat May 11 03:50:39 2013] 215.192300 total counts/ 130.348000 bgd. counts: snr = 7.431397
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.015763 pixels
  Position = (232.3, 370.7) = 0 34 27.57 -21 20 24.9
  Extent = 6.6 (5.3-8.2)", rotation angle = 0
  Source counts = 84.8 +/- 14.7
  Background counts = 130.3
  Rate = 0.004 +/- 0.0007
[Sat May 11 03:50:39 2013] Vigneting correction estimate = 1.000000
[Sat May 11 03:50:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 03:50:39 2013] Assessing source extent using major axis lower bound
[Sat May 11 03:50:39 2013] Source does appear to be extended
[Sat May 11 03:50:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 04:11:29 2013] XMMSAS src. selection expression = ellipse(20165.104800, 32202.062400, 395.470811, 395.470811, 0.000000, X, Y)
[Sat May 11 04:11:29 2013] Writing source region out to fullrun_mos1_xmm0044350101_pi300-10000_pass1_cl_src4_src.reg
[Sat May 11 04:11:29 2013] Extracting stamp from image fullrun_mos1_xmm0044350101_pi300-10000_cl_sm2.00.img.gz, (210, 348) - (255, 393)
[Sat May 11 04:11:29 2013] XMMSAS bgd. selection expression = annulus(20165.104800, 32202.062400, 659.118019, 1318.236038, X, Y)
[Sat May 11 04:11:29 2013] Writing fullrun_mos1_xmm0044350101_pi300-10000_pass1_cl_src4.gif
[Sat May 11 04:13:11 2013] Mean detx,y = (-3412.94, 6914.35) 
[Sat May 11 04:13:12 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 04:13:29 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 04:13:29 2013] Setting source spectrum file to fullrun_mos1_xmm0044350101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat May 11 04:13:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0044350101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat May 11 04:19:50 2013] Not generating rmf since there are only 84 counts
[Sat May 11 04:19:50 2013] rmf not generated due to insufficient counts
[Sat May 11 04:35:03 2013] Updating aperture counts using extracted products
[Sat May 11 04:35:03 2013] Total counts from fullrun_mos1_xmm0044350101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 118.00
[Sat May 11 04:35:03 2013] Total counts from fullrun_mos1_xmm0044350101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 235.00
[Sat May 11 04:35:03 2013] Got source and background scale factors 481520.000000, 3632938.000000
[Sat May 11 04:35:03 2013] User source parameters:
  Position = (232.3, 370.7) = 0 34 27.57 -21 20 24.9
  Extent = 6.6 (5.3-8.2)", rotation angle = 0
  Source aperture counts = 86.9 +/- 11.9
  Background aperture counts = 31.1
  Rate = 0.004 +/- 0.0006

[Sat May 11 04:35:05 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 04:35:05 2013] Using photon index=1.80, rate=0.0041, arf fullrun_mos1_xmm0044350101_pi300-10000_pass1_cl_src4.arf
[Sat May 11 04:35:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 04:35:05 2013] Updating source flux to 6.2e-14
[Sat May 11 04:35:08 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 11 04:35:10 2013] xmm0044350101/analysis//spectral/fullrun_mos1_xmm0044350101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete